Abstract:Abstract The small modular sodium-cooled fast reactor plays a vital role in Generation-IV reactors, requiring the capability of load-follow operation to address the challenges posed by rapidly fluctuating electric loads on the power grid. Nevertheless, the thermal and mechanical stresses associated with load-follow operation can be undesirable for fuel and other reactor components. To address this, an alternative approach is proposed, focusing on operating the reactor at or near steady state and storing excess energy in a thermal heat storage system. The stored thermal energy can be efficiently utilized during periods of peak electric demand, effectively mitigating grid variability resulting from daily load demand changes and intermittent renewable energy sources. The sodium-cooled fast reactor is the most promising candidate for coupling with the molten salt thermal heat storage systems because the reactor coolant inlet and outlet temperatures of sodium-cooled fast reactors are in the margin of the molten salt working temperature. This study focuses on the integration of a molten salt energy storage system between the intermediate sodium loop and secondary loop of the modular sodium-cooled fast reactor. By employing this configuration, the coupled system enables the reactor to operate at nominal full power effectively, even during periods of variable electric demand. The research emphasizes the dynamic responses and control strategy of the coupled system. Initially, mathematical models for the small modular sodium-cooled fast reactor and molten salt energy storage system are proposed and implemented using MATLAB/SIMULINK. Subsequently, according to the operation strategies and control logics, the conventional PID control systems are designed for both the small modular sodium-cooled fast reactor and molten salt energy storage system. The dynamic simulations of load-follow scenarios are conducted to assess the performance of the small modular sodium-cooled fast reactor coupled with molten salt energy storage system. The simulation results demonstrate the feasibility of utilizing a molten salt energy storage system coupled with a small modular sodium-cooled fast reactor to efficiently minimize power swings during periods of variable electric load. Consequently, the coupled system significantly enhances the operational flexibility, safety, and cost-effectiveness of the sodium-cooled fast reactor, making it a promising and sustainable solution for ensuring grid stability and meeting the increasing energy demands of the future. Overall, this research contributes to advancing the state-of-the-art in small modular reactor technology, providing valuable insights into the integration of energy storage systems with sodium-cooled fast reactors, and showcasing the potential benefits in terms of enhanced operational performance, grid stability, and sustainability.

Dynamic Simulation of a Molten Salt-Steam Superheater for Load-Following Applications

Model-Based Load Following Control for Helical-Coiled Supercritical Steam Generator of MHTGR

Convective Heat Transfer of High Temperature Molten Salt Flowing Across Tube Bundles of Steam Generator in a Solar Thermal Plant

A MOPSO-based Design Optimization on Molten Salt Steam Generator Forced Circulation System under Off-Design Conditions

Experimental Investigation of Heat Transfer Performance of Solar Salt and Subcritical Water/Steam

Characterizing and improving the performance of molten-salt-steam heat exchangers in concentrating solar power plants

Numerical Study on Thermal Performance and Thermal Stress of Molten Salt Receiver Tube Based on Induction Heating

Cross-Cutting CFD Support for Efficient Design of a Molten Salt Electric Heater for Flexible Concentrating Solar Power Plants

Experimental Investigation on the Heat Transfer Performance of Molten Salt Flowing in an Annular Tube

Experimental Investigation on the Shell-Side Heat Transfer Performance of Molten Salt Steam Generator

Dynamic Thermal Transport Characteristics of a Real-Time Simulation Model for a 50 MW Solar Power Tower Plant

Evaluation of alternative eutectic salt as heat transfer fluid for solar power tower coupling a supercritical CO2 Brayton cycle from the viewpoint of system-level analysis

Mitigation of the Local Overheating Phenomenon in Molten Salt Electric Heaters Through Flow Field Optimization

Dynamic Simulation Model with Virtual Interfaces of Supercritical Working Fluid Heat Exchanger Based on Moving Boundary Method

Analysis of a chloride molten salt pump and tank interface for high-temperature operation

Thermodynamic Performance of Molten Salt Heat Storage System Used for Regulating Load and Supplying High Temperature Steam in Coal-Fired Cogeneration Power Plants

Dynamic Simulation of a Small Modular Sodium-Cooled Fast Reactor Coupled with Molten Salt Energy Storage System

Self-adaptive heat extraction controller for solar thermal tower operational with molten salt tanks

Numerical modeling and parametric study of the heat storage process of the 1.05 MW molten salt furnace

Dynamic performance analysis of different schemes of solar tower power plant

Control strategy of molten salt solar power tower plant function as peak load regulation in grid