Waterless Dyeing of Polyamide 6.6

Semiha Eren,İrem Özyurt

DOI: https://doi.org/10.3390/polym16111472

IF: 5

2024-05-23

Polymers

Abstract:Waterless dyeing of polyamide 6.6 using scCO2 (supercritical carbon dioxide) was investigated. PA (polyamide) fibers can be dyed with various dyes, including disperse dyes. The conventional aqueous dyeing process uses large amounts of water and produces polluted water. Considering these environmental issues, waterless dyeing of fibers is a forefront issue, and utilization of supercritical carbon dioxide (scCO2) is a commercially viable technology for waterless dyeing. This study tested PA6.6 (polyamide 6.6) dyeing in scCO2 at 100 °C 220 bar pressure for 45 min. Color measurements and color fastness tests were performed, as well as tensile strength, scanning electron microscope (SEM) analysis, and Fourier transform infrared spectroscopy (FTIR) analysis. PA6.6 fabrics yielded higher K/S (color strength, the Kubelka–Munk equation) values with larger molecular weight dye and almost the same color strength with medium and small-sized dyes, demonstrating the ability of dyeing in a supercritical environment without water as a more environmentally friendly dyeing option compared to conventional dyeing.

polymer science

What problem does this paper attempt to address?

The problem this paper attempts to address is: reducing the environmental impact of the textile dyeing process, particularly by developing a waterless dyeing technology to replace traditional water-based dyeing methods. Specifically, the researchers explored the feasibility of using supercritical carbon dioxide (scCO₂) as a solvent for waterless dyeing of polyamide 6.6 (PA6.6).

### Background Issues:
1. **Environmental Issues of Traditional Water-Based Dyeing**:
- The traditional water-based dyeing process consumes a large amount of water resources.
- The wastewater after dyeing contains dyes and other chemical auxiliaries, leading to environmental pollution.

2. **Need for Waterless Dyeing**:
- With the increasing awareness of environmental protection, developing waterless dyeing technology has become a frontier research topic.
- Supercritical carbon dioxide (scCO₂) as a solvent for waterless dyeing has commercial feasibility and environmental friendliness.

### Research Objectives:
- **Evaluate the Effectiveness of Waterless Dyeing**: Study the dyeing effect of PA6.6 fibers in supercritical carbon dioxide (scCO₂), including performance indicators such as color strength and color fastness.
- **Compare Dyeing Performance of Different Molecular Weight Dyes**: Test the performance of low, medium, and high energy level disperse dyes in waterless dyeing to determine the optimal dyeing conditions.
- **Verify the Environmental Advantages of Waterless Dyeing**: Evaluate the environmental impact of waterless dyeing by comparing indicators such as chemical oxygen demand (COD) between traditional water-based dyeing and supercritical carbon dioxide dyeing.

### Key Findings:
- **Color Strength**: For high molecular weight disperse dyes (such as Disperse Yellow 114), the color strength of supercritical carbon dioxide dyeing is significantly higher than that of traditional water-based dyeing.
- **Color Fastness**: Samples dyed with supercritical carbon dioxide showed better performance in wash fastness and perspiration fastness, especially in dyeing fastness on nylon fibers.
- **Environmental Impact**: The supercritical carbon dioxide dyeing process produces less wastewater and has a lower chemical oxygen demand (COD), demonstrating better environmental friendliness.

In conclusion, this study aims to address the environmental issues in the traditional water-based dyeing process through supercritical carbon dioxide waterless dyeing technology, providing a more sustainable and environmentally friendly dyeing method for the textile industry.