Abstract:A promising cost-effective, easily fabricated, and mass-produced sensor for Hg 2+ detection, based on poly(o-mercaptoaniline)-iodide (I − -POMA), has been developed. The fabrication of I − -POMA nanofibers is accomplished through a one-step process involving the oxidation of o-amino-benzenethiol monomers with iodine (I 2 ). The I − -POMA nanofibers exhibit a remarkable elongated structure, and their actual length is measured to be approximately 77 nm. The effectiveness of the I − -POMA electrode sensor in detecting Hg 2+ ions is tested using two different methods: a simple potentiometric two-electrode system and a cyclic voltammetry three-electrode system. In the simple potentiometric system, the calculated slope is found to be 25.2 mV per decade, indicating the high sensitivity and effectiveness of the I − -POMA electrode sensor, especially at a pH of 5.5, for Hg 2+ ion detection. In the cyclic voltammetry method, both the cyclic curve area and the generated current density (I) values increase proportionally with varying concentrations of Hg 2+ ions. The sensitivity calculated from this method is 2.2 μA per micromolar (μA/M), confirming the sensor's precision in detecting Hg 2+ ions over a wide range of concentrations. Importantly, the I − -POMA electrode sensor demonstrates exceptional potential for detecting Hg 2+ ions even in the presence of other interfering ions like Ni 2+ , Zn 2+ , Ca 2+ , Mg 2+ , K + , and Al 3+ , showcasing its outstanding selectivity. Furthermore, the I − -POMA electrode sensor is tested in various natural samples and consistently shows exceptional sensitivity to Hg 2+ ions, highlighting its suitability for practical applications in environmental monitoring and water quality assessment. In summary, the I − -POMA electrode sensor displays remarkable responsiveness, sensitivity, and selectivity in detecting Hg 2+ ions, making it a promising candidate for a wide range of Hg 2+ sensing applications in real-world life.

Investigation of ITO based liquid sensor for ammonia hydroxide detection

In(OH)3particles from an Ionic Liquid Precursor and Their Conversion to Porous In2O3particles for Enhanced Gas Sensing Properties

Study on the accuracy of Indium-Tin-Oxide (ITO) nanoparticle sensor based on solvent detection characteristics in water

The Preparation of SiO2/GO/PVA Based Hydrogel Sensor and Its Application for Rapid and Sensitive Detection of NH3

An All-Solid-State Ammonium Ion-Selective Electrode Based on Polyaniline As Transducer and Poly (O-Phenylenediamine) As Sensitive Membrane

Formation of High-Purity Indium Oxide Nanoparticles and Their Application to Sensitive Detection of Ammonia

A highly sensitive electrochemical sensing probe incorporating classical Berthelot's reaction and glassy carbon electrode for measuring ultra-trace levels of ammonia/ NH 4 + in water

Metal oxide nanomaterial-modified ion-selective electrodes for detection of NH4+ in aquaponic systems: electrochemical analyses, characterization, and sensing mechanism

Ammonia sensing characteristics of an ITO-V 2 O 5 based chemoresistive dual-type gas sensors (CDGS) decorated with platinum nanoparticles

Development of Ammonia Gas Sensor Using Optimized Organometallic Reagent

High-Sensitive Ammonia Sensors Based On Tin Monoxide Nanoshells

Development and Characterization of a Sol–Gel-Functionalized Glass Carbon Electrode Probe for Sensing Ultra-Trace Amounts of NH3 and NH4+ in Water

Preparation and Ammonia Sensing of Copper Iodide Nanomaterials Combined with Copper Iodide‐Isopropanolamine Complexes

Optochemical Sensor for Ammonia Based on a Lipophilized pH Indicator in a Hydrophobic Matrix

Optical rubbery ormosils sensor for the detection of ammonia

Poly(O-mercaptoaniline)-iodide nanofiber composite as a promising potentiometric sensor for the detection of Hg2+ ions in water

High-performance Ammonia Sensor at Room Temperature Based on 2D Conductive MOF Cu3(HITP)2

Nanoporous naphthalene diimide surface enhances humidity and ammonia sensing at room temperature

Instant‐in‐Air Liquid Metal Printed Ultrathin Tin Oxide for High‐Performance Ammonia Sensors

Enhancing Ammonia Sensing Performance of Ag 2 MoO 4 -based Mixed-Potential Sensor by Introducing Ionic and Electronic Conductance

Investigation of Silver-Doped Iron Oxide Nanostructures Functionalized with Ionic Liquid for Colorimetric Sensing of Hydrogen Peroxide