Abstract:Sodium-ion batteries (SIBs) have emerged as a promising alternative to lithium-ion batteries (LIBs) due to the abundance and low cost of sodium resources. Cathode material plays a crucial role in the performance of sodium ion batteries determining the capacity, cycling stability, and rate capability. Na3V2(PO4)3 (NVP) is a promising cathode material due to its stable three-dimensional NASICON structure, but its discharge capacity is low and its decay is serious with the increase of cycle period. We focused on modifying NVP cathode material by coating carbon and doping Nb5+ ions for synergistic electrochemical properties of carbon-coated NVP@C as a cathode material. X-ray diffraction analysis was performed to confirm the phase purity and crystal structure of the Nb5+ doped NVP material, which exhibited characteristic diffraction peaks that matched well with the NASICON structure. Nb5+-doped NVP@C@Nbx materials were prepared using the sol–gel method and characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Raman and Brunauer -Emmett-Teller (BET) analysis. First-principles calculations were performed based on density functional theory. VASP and PAW methods were chosen for these calculations. GGA in the PBE framework served as the exchange-correlation functional. The results showed the NVP unit cell consisted of six NVP structural motifs, each containing octahedral VO6 and tetrahedral PO4 groups to form a polyanionomer [V2(PO4)3] along with the c-axis direction by PO4 groups, which had Na1(6b) and Na2(18e) sites. And PDOS revealed that after Nb doping, the d orbitals of the Nb atoms also contributed electrons that were concentrated near the Fermi surface. Additionally, the decrease in the effective mass after Nb doping indicated that the electrons could move more freely through the material, implying an enhancement of the electron mobility. The electrochemical properties of the Nb5+ doped NVP@C@Nb cathode material were evaluated through cyclic voltammetry (CV), galvanostatic charge-discharge tests, electrochemical impedance spectroscopy (EIS), and X-ray photoelectric spectroscopy (XPS). The results showed that NVP@C@Nb0.15 achieved an initial discharge capacity as high as 114.27 mAhg−1, with a discharge capacity of 106.38 mAhg−1 maintained after 500 cycles at 0.5C, and the retention rate of the NVP@C@Nb0.15 composite reached an impressive 90.22%. NVP@C@Nb0.15 exhibited low resistance and high capacity, enabling it to create more vacancies and modulate crystal structure, ultimately enhancing the electrochemical properties of NVP. The outstanding performance can be attributed to the Nb5+-doped carbon layer, which not only improves electronic conductivity but also shortens the diffusion length of Na+ ions and electrons, as well as reduces volume changes in electrode materials. These preliminary results suggested that the as-obtained NVP@C@Nb0.15 composite was a promising novel cathode electrode material for efficient sodium energy storage.

Submicrometer Rod-Structured Na 7 V 4 (P 2 O 7 ) 4 (PO 4 )/C as a Cathode Material for Sodium-Ion Batteries

Submicrometer Rod-Structured Na7V4 (P2O7)4(PO4)/C As a Cathode Material for Sodium-Ion Batteries

A Stable High-Potential Na 7 V 4 (P 2 O 7 ) 4 (PO 4 ) Cathode for Sodium-Ion Batteries Developed from a Water-Based Slurry

Off-stoichiometric Na3V2-x(PO4)(3)/C Cathode Composites with Stable Lifetime for Sodium Ion Batteries

Structurally Modulated Na4–xFe3–xVx(PO4)2P2O7 by Vanadium Doping for Long-Life Sodium-Ion Batteries

A robust carbon coating of Na3V2(PO4)3 cathode material for high performance sodium-ion batteries

N/P-dual-doped carbon coated Na3V2(PO4)2O2F microspheres as high-performance cathode material for sodium-ion batteries.

Carbon coated Na3+xV2-xCux(PO4)3@C cathode for high-performance sodium ion batteries

Superior performance of Na7V4(P2O7)4PO4 in sodium ion batteries

High-rate performance and super long-cycle stability of Na3V2(PO4)3 cathode material coated by diatomic doped carbon

Diatomic Doped Carbon Coating Boosting the High-Rate Performance and Super Long-Cycle Stability of Na3v2(Po4)3 Cathode Material

Achieving the Stable Structure and Superior Performance of Na 3 V 2 (PO 4 ) 2 O 2 F Cathodes via Na-Site Regulation

Realizing high-performance Na3V2(PO4)2O2F cathode for sodium-ion batteries via Nb-doping

Facile Al2O3 Coating Suppress Dissolution of Mn2+ in Mn-substituted Na3V2(PO4)3 with Outstanding Electrochemical Performance for Full Sodium Ion Batteries

Preparation of Nb5+ Doped Na3V2(PO4)3 Cathode Material for Sodium Ion Batteries

Ultra-long cycle life and high rate performance subglobose Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>2</sub>F<sub>3</sub>@C cathode and its regulation

Facile One-Step Carbothermal Reduction Synthesis of Na3V2(PO4)2F3/C Serving As Cathode for Sodium Ion Batteries

Insights into Tiny High‐Entropy Doping Promising Efficient Sodium Storage of Na3V2(PO4)2O2F toward Sodium‐Ion Batteries

Sodium Rich Vanadium Oxy-Fluorophosphate - Na3.2 Ni0.2 V1.8 (PO4 )2 F2 O - as Advanced Cathode for Sodium Ion Batteries

Single-crystalline Mg-substituted Na4Mn3(PO4)2P2O7 nanoparticles as a high capacity and superior cycling cathode for sodium-ion batteries

Simultaneous Defect Regulation by P-N Type Co-Substitution in a Na3V2(PO4)3/C Cathode for High Performance Sodium Ion Batteries.