Abstract:Porous SiO2-Carbon composites with excellent electrochemical performance were fabricated from liquefied bio-based sawdust via a simple in situ doping approach. Morphologies and pore textures of the samples were controlled effectively by doping with SiO2 and optimizing carbonization temperature. The morphologies of SiO2-Carbon composites from carbonization between 700–900 °C changed from bump-like to coral-like, to a network-like structure, and the pore textures changed from a disordered to an ordered structure. Benefitting from specific morphologies and pore textures, the large specific surface areas (538-780 m2/g) of the SiO2-Carbon composites exhibited excellent electrochemical performance for supercapacitors. Remarkably, the reticular-like SiO2-Carbon composites with an ordered porous structure at carbonization 900 °C revealed a high specific capacitance (260 F/g), energy density (23.1 wh/kg) and power density (640 w/kg) at a current density of 1.6 A/g in 1 M KOH electrolyte, as well as a good rate performance and stability (with capacitance retention above 97 % after 5000 cycles). Especially, the capacitance is around 1.4 times and 1.3 times higher than that of the undoped carbon and SiO2-Carbon carbonized at 700 °C, respectively. The results indicate that SiO2-Carbon composites should be a promising candidate for capacitive application, and the excellent capacitance is attributed to the contribution of pseudo-capacitance from the SiO2 doping and double layer capacitance from the special pore textures. This work provides a simple way for full utilization of biomass waste for supercapacitor material.

Facile fabrication of carbon microtube arrays from waste wood for use as self-supporting supercapacitor electrodes

Preparation of eggplant-derived macroporous carbon tubes and composites of EDMCT/Co(OH)(CO3)0.5 nano-cone-arrays for high-performance supercapacitors

Design of Carbon Materials with Ultramicro-, Supermicro- and Mesopores Using Solvent- and Self-Template Strategy for Supercapacitors

Preparation of Three-Dimensional Carbon Microtube/Carbon Nanotube Composites and Their Application in Supercapacitor

All-solid-state Supercapacitors from Natural Lignin-Based Composite Film by Laser Direct Writing

Facile method to produce sub-1 nm pore-rich carbon from biomass wastes for high performance supercapacitors

Non-carbonized porous lignin-free wood as an effective scaffold to fabricate lignin-free Wood@Polyaniline supercapacitor material for renewable energy storage application

High-mass loaded redox-active lignin functionalized carbonized wood collector to construct sustainable and high-performance supercapacitors

A facile approach to prepare biomass-derived activated carbon hollow fibers from wood waste as high-performance supercapacitor electrodes

Green self-assembly synthesis of porous lignin-derived carbon quasi-nanosheets for high-performance supercapacitors

Green Fabrication of Hierarchically Porous Carbon Microtubes from Biomass Waste Via Self-Activation for High-Energy-density Supercapacitor

Self-supported Porous Wood Carbon Electrode with a MoC/carbon Nanocage Composite for Application in a High-Performance Supercapacitor

Enhanced electrochemical performance of Si-carbon materials from Larch waste by filtration liquefaction residue process

Wood and PAN-derived Hierarchically Porous Low-Tortuosity Carbon Electrodes for High-Areal-performance Supercapacitors

Novel Synthesis Route for the Preparation of Mesoporous Nitrogen-Doped Carbons from Forestry Wastes for Supercapacitors

High performance supercapacitors deploying cube-templated tracheid cavities of wood-derived carbon

Facile fabrication and structure control of SiO2/carbon via in situ doping from liquefied bio-based sawdust for supercapacitor applications

In Situ Synthesis of Polyaniline/carbon Nanotube Composites in a Carbonized Wood Scaffold for High Performance Supercapacitors

A facile synthesis of hierarchical porous carbon derived from renewable lignin for high-performance supercapacitor

Facile and low-cost fabrication of interconnected hierarchically porous carbon for high-performance supercapacitors

Ultra-thick Electrodes Based on Activated Wood-Carbon Towards High-Performance Quasi-Solid-state Supercapacitors