Microwave dielectric characterization and loss mechanism of biowaste during pyrolysis

Xing Fan,Boyu Li,Wenhua Zi,Mengli Kang,Hedian Wu,Junping Bian,MingYu Sun
DOI: https://doi.org/10.1016/j.enconman.2024.118075
IF: 10.4
2024-01-14
Energy Conversion and Management
Abstract:The effectiveness of microwave heating of biomass depends on the changes in dielectric properties. This study systematically investigated the microwave dielectric properties and loss mechanism of biowaste at different frequencies (915 and 2,450 MHz) and temperatures (25–800 °C) using the cavity perturbation method. The gas emissions and properties of the biochar produced during pyrolysis were characterised by SEM, XRD, and TG-FTIR The findings revealed that the dielectric properties and penetration depth of the biomass and biochar changed significantly during microwave pyrolysis. The dielectric constant and dielectric loss coefficient first increased and then decreased during the drying stage, and they decreased continuously with the volatile's generation in the pyrolysis stage, while the formation and high conductivity of biochar promoted a sharp increase in dielectric properties during the carbonisation stage. The loss tangent angle is 0.01–0.05 in the first two stages, while it increased to 0.10–0.25 in the carbonization stage, demonstrated that the biowaste is a low-loss material. However, the microwave absorption capacity was enhanced for pyrolyzed biochar. The loss mechanism revealed that dipole polarisation primarily contributes to the dielectric loss during the drying and pyrolysis stages, whereas interfacial polarisation plays an important role during the carbonisation stage. The data provided in this paper contribute to the evaluation of microwave penetration depth in biomass and the design of large-scale microwave-based heating systems. Furthermore, this study offers a theoretical basis for modelling and simulating the microwave heating of biomass and achieving efficient energy conversion.
energy & fuels,thermodynamics,mechanics
What problem does this paper attempt to address?