Study on cementitious grout for scour protection of offshore wind turbine foundations

Fei Sha Shijiu Gu Jingze Xu Yulong Dong Chenyu Xia Engineering College,Ocean University of China,Qingdao,China
DOI: https://doi.org/10.1080/1064119x.2024.2411728
2024-10-12
Marine Georesources and Geotechnology
Abstract:To study scour-resistant applicability, 6–10% mass ratio of polyurethane (PU) was added to sulphoaluminate cement (SAC) and ordinary Portland cement (OPC) grouts to generate OPCPU and SACPU. Sodium silicate (SS) with slurry volume ratio of 1:1–5:1 was added to SAC and OPC grouts to generate OPCSS and SACSS. The water-cement ratio ( w/c ) of grout was 0.8–1.5. Fresh-state properties and mechanical properties were investigated. Hydrated minerals and microstructures were analyzed, scouring tests were conducted considering key formulations. The results indicated that SACSS and OPCSS have a shorter setting time and higher strength, which makes them suitable as scour resistance materials. At the w/c of 1.0, OPCSS with a volume ratio of 3:1 and SACPU with 6% PU were selected for scour resistance tests. It showed that maximum scour depths and sediment transports were 7.0–12.2 and 1.1–1.2% as those without reinforcing conditions. The critical shear stress on the seabed under reinforcement is ∼10 3 times greater than the bed shear stress. This inhibits the occurrence of scouring. The study evaluated the applicability of cementitious reinforcement for scour resistance. This study analyzed material and mechanical properties, hydrated minerals, and microstructures, and conducted scour tests to optimize grouting material ratios for seabed scour protection, providing references for soil reinforcement and grouting protection.
engineering, ocean, geological,mining & mineral processing,oceanography
What problem does this paper attempt to address?