Abstract:In this study, successful joints were fabricated on 4-mm-thick aluminum alloy 5052 sheets by using friction stir spot welding (FSSW) method. This research thoroughly investigated the impacts of welding parameters, specifically dwell time (DT) and rotational speed (RS), on the microstructure, and joint efficiency mechanical characteristics of the joints. The finding of this study highlighted the importance of optimization of process parameters to achieve superior weld joints. The most noteworthy achievement of this study was the attainment of maximum tensile shear load TSL of 2439 N with 19.4% joint efficiency at DT of 2 s and RS of 1300 rpm. A remarkable 48% improvement was observed in the obtained results at lower RS of 850 rpm and longer DT of 5 s. Simultaneously, maximum microhardness was 37.2 HV which was attained in thermal–mechanical affected zone at DT of 2 s and RS of 850 rpm, which was about 51% higher than the condition involving lower RS. Microstructure examination unveiled the significant influences of process parameters on hook deformation and penetration around the pin area. Additionally, in this study, a novel prediction model was introduced to estimate the temperature evaluation and tensile shear load of the samples. The model was constructed employing various machine learning techniques, multi-linear regression (MLR), support vector machine (SVM), adoptive neuro-fuzzy inference system (ANFIS) and including artificial neural network (ANN). The results obtained using this model served as a pioneering approach to predict the tensile shear load and temperature evaluation of welded samples. Remarkably, ANFIS model surpassed the other models due to its accuracy in perdition. The average error of this model for tensile shear load was only 4.3%, and for temperature evaluation, it was only 0.803%. The outcome of this study revealed that this predictive model could be a milestone in this field, enabling more precise and reliable prediction of key welding process parameters which significantly enhanced the efficiency and quality of welding processes.

Prediction of corrosion rate for friction stir processed WE43 alloy by combining PSO-based virtual sample generation and machine learning

Microstructure and corrosion behavior of thermo-mechanically processed rare earth Mg alloy: Effect of friction stir processing

Modelling Corrosion Behavior of Friction Stir Processed Aluminium Alloy 5083 Using Polynomial: Radial Basis Function

An Optimized Multilayer Perceptrons Model Using Grey Wolf Optimizer to Predict Mechanical and Microstructural Properties of Friction Stir Processed Aluminum Alloy Reinforced by Nanoparticles

Enhancing wear resistance of AZ61 alloy through friction stir processing: experimental study and prediction model

Microstructure Study of Friction Stir Processed Hypereutectic Al-20Si Alloy and Analysis of the Wear Behaviour using Machine Learning Algorithms

Prediction of properties of friction stir spot welded joints of AA7075-T651/Ti-6Al-4V alloy using machine learning algorithms

Mathematical Modeling, Optimization and Prediction of Friction Stir Spot Welding Parameters for Dissimilar Joining AA2024-T6 Aluminium and AZ31B Magnesium Alloy in Lap Weld Configuration

Prediction of electrochemical corrosion behavior of magnesium alloy using machine learning methods

Application of machine learning approaches to predict joint strength of friction stir welded aluminium alloy 7475 and PPS polymer hybrid joint

Enhancing Predictive Capabilities: Machine Learning Approaches for Predicting Mechanical Behavior in Friction Stir Welded Aluminum Alloys

Effect of Traverse Speed Variation on Microstructural Properties and Corrosion Behavior of Friction Stir Welded WE43 Mg Alloy Joints

Predictive Analysis of Water Wettability and Corrosion Resistance of Secondary AlSi10MnMg(Fe) Alloy Manufactured by Vacuum-Assisted High Pressure Die Casting

Understanding the tribo-corrosion mechanisms of friction stir processed steel deposited by high-pressure deposition additive manufacturing process

Artificial intelligence algorithms for prediction of the ultimate tensile strength of the friction stir welded magnesium alloys

Evaluation of Microstructure, Mechanical Properties, Wear Resistance and Corrosion Behaviour of Friction Stir-Processed AZ31B-H24 Magnesium Alloy

Effect of friction stir processing on microstructure and properties of WE43 alloy

Prediction of Mg Alloy Corrosion Based on Machine Learning Models

Optimization of 2024-T3 Aluminum Alloy Friction Stir Welding Using Random Forest, XGBoost, and MLP Machine Learning Techniques

Optimizing friction stir processing parameters for aluminium alloy 2024 reinforced with SiC particles: A taguchi approach of investigation

Assessment of friction stir spot welding of AA5052 joints via machine learning