Abstract:This paper reports on a study of carbon nanotube (CNT) thin film, or buckypaper (BP), integrated into carbon fiber (CF) prepreg composites to create hybrid composite materials with high CNT content. The autoclave process of manufacturing hybrid composite laminates was investigated to gain an understanding of nano/micro dual‐scale resin flow characteristics. The study found that resin bleeding along the through‐thickness direction was inhibited due to extra‐low permeability and high resin absorbing capacity of the BP. Resin matrix‐impregnated BP layers were much thicker than dry pristine BP due to high resin absorbency and swelling effects. The BP/unidirectional carbon fiber (UD‐CF) hybrid composites with local fiber volume fraction of 61.46 vol% in CF ply and local CNT volume fraction of 26.57 vol% in BP layer, had a tensile strength of 2519 ± 101 MPa and modulus of 149 ± 18 GPa. The dramatic improvements in both in‐plane and through‐thickness electrical conductivities demonstrate potential for both structural and multifunctional applications of the resultant hybrid composites. Carbon nanotube sheet was successfully integrated into carbon fiber composites to create hybrid multifunctional structural composite materials. In this study, nano/micro dual‐scale resin flow characteristics and quality control in the autoclave process of manufacturing hybrid composite laminates were investigated. This hybrid composites had competitive strength and modulus, and resulted in dramatic improvements in both in‐plane and through‐thickness electrical conductivities.

In situ formation of a carbon nanotube buckypaper for improving the interlaminar properties of carbon fiber composites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Enhanced Mechanical and Electrical Properties of Carbon Nanotube Buckypaper by in Situ Cross-Linking

Interlaminar toughening in flax fiber-reinforced composites interleaved with carbon nanotube buckypaper

Carbon Fiber/Carbon Nanotube Buckypaper Interply Hybrid Composites: Manufacturing Process and Tensile Properties

In situ consolidation process-based fabrication and interlaminar modification mechanism associated with CF/PEEK multiscale nanocomposites characterized by interlaminar doping of CNTs

Interlaminar properties of carbon nanotubes modified carbon fibre fabric reinforced polyimide composites

Increasing the interlaminar fracture toughness and thermal conductivity of carbon fiber/epoxy composites interleaved with carbon nanotube/polyimide composite films

Cellulose Nanocrystal-Polyetherimide Hybrid Nanofibrous Interleaves for Enhanced Interlaminar Fracture Toughness of Carbon Fibre/epoxy Composites

Interlaminar toughening in carbon fiber/epoxy composites interleaved with CNT-decorated polycaprolactone nanofibers

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites

Improving the interlaminar bonding and thermal conductivity of polymer composites by using split-radial mesophase pitch-based carbon fiber as reinforcement

Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils

A Molecular‐Level Interface Design Enabled High‐Strength and High‐Toughness Carbon Nanotube Buckypaper

Construction of cellulose nanofiber/carbon nanotube synergistic network on carbon fiber surface to enhance mechanical properties and thermal conductivity of composites

Toughening mechanisms and morphology of composite cylinders interleaved with hybrid nanoparticles

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion