Abstract:A titanium dioxide (TiO2) compact film is a widely used electron transport layer (ETL) for n–i–p planar perovskite solar cells (PSCs). However, TiO2 sufferers from poor electrical conductivity, leading to high energy loss at the perovskite/ETL/transparent conductive oxide interface. Doping the TiO2 film with alkali- and transition-metal elements is an effective way to improve its electrical conductivity. The conventional method to prepare these metal-doped TiO2 films commonly requires time-consuming furnace treatments at 450–600 °C for 30 min to 3 h. Herein, a rapid one-step laser treatment is developed to enable doping of tantalum (Ta) in TiO2 (Ta-TiO2) and to simultaneously induce the crystallization of TiO2 films from its amorphous precursor to an anatase phase. The PSCs based on the Ta-TiO2 films treated with the optimized fiber laser (1070 nm) processing parameters (21 s with a peak processing temperature of 800–850 °C) show enhanced photovoltaic performance in comparison to that of the device fabricated using furnace-treated films at 500 °C for 30 min. The ambient-processed planar PSCs fabricated under high relative humidity (RH) of 50–70% display power conversion efficiencies (PCEs) of 18.34% and 16.04% for devices based on Cs0.1FA0.9PbI3 and CH3NH3PbI3 absorbers, respectively. These results are due to the improved physical and chemical properties of the Ta-TiO2 films treated by the optimal laser process in comparison to those for the furnace process. The laser process is rapid, simple, and potentially scalable to produce metal-doped TiO2 films for efficient PSCs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24225.Digital images, photovoltaic parameters, XPS, UV–vis–NIR, TEM, and SEM images, schematic diagrams, resistance measurements, thermal camera recordings, Raman and XRD results, efficiency comparison table, and other associated tables (PDF)This article has not yet been cited by other publications.

Laser-Assisted Ultrafast Fabrication of Crystalline Ta-Doped TiO 2 for High-Humidity-Processed Perovskite Solar Cells

Ultrafast and Scalable Laser‐Induced Crystallization of Titanium Dioxide Films for Planar Perovskite Solar Cells

Low-temperature Processed Tantalum/niobium Co-Doped TiO2 Electron Transport Layer for High-Performance Planar Perovskite Solar Cells

Low-temperature processed tantalum/niobium co-doped TiO 2 electron transport layer for high-performance planar perovskite solar cells

Low‐Temperature in Situ Amino Functionalization of TiO2 Nanoparticles Sharpens Electron Management Achieving over 21% Efficient Planar Perovskite Solar Cells

Tantalum-Doped TiO2 Prepared by Atomic Layer Deposition and Its Application in Perovskite Solar Cells

Alkali Metal Chloride‐Doped Water‐Based TiO2 for Efficient and Stable Planar Perovskite Photovoltaics Exceeding 23% Efficiency

Effect of Tantalum Doping on SnO2 Electron Transport Layer Via Low Temperature Process for Perovskite Solar Cells

Alkali Metal Chloride‐Doped Water‐Based TiO 2 for Efficient and Stable Planar Perovskite Photovoltaics Exceeding 23% Efficiency

Efficient Planar Perovskite Solar Cells with Low-Temperature Atomic Layer Deposited TiO2 Electron Transport Layer and Interfacial Modifier

Mild Solution-Processed Metal-Doped TiO2 Compact Layers for Hysteresis-Less and Performance-Enhanced Perovskite Solar Cells

Low-temperature Preparation of Titanium Dioxide Thin Layer for Highly Efficient CsPbI3 Perovskite Solar Cells

Low-temperature preparation of titanium dioxide thin layer for highly efficient CsPbI 3 perovskite solar cells

Suppressed charge carrier trap states and double photon absorption in substitutional Ta-doped TiO<sub>2</sub>-NT array

Atomic Layer Deposition of TiO2 for a High-Efficiency Hole-Blocking Layer in Hole-Conductor-Free Perovskite Solar Cells Processed in Ambient Air

Ultraviolet-ozone Modification on TiO2 Surface to Promote Both Efficiency and Stability of Low-Temperature Planar Perovskite Solar Cells

Room-temperature processed TiO2 to construct composite electron transport layers for efficient planar perovskite solar cells

Application of Compact TiO2 Layer Fabricated by Pulsed Laser Deposition in Organometal Trihalide Perovskite Solar Cells

In Situ Surface Fluorination of TiO 2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet‐Light Stability

Controlling the Electrical Properties of Undoped and Ta-doped TiO2 Polycrystalline Films via Ultra-Fast Annealing Treatments

In Situ Surface Fluorination of TiO2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet‐Light Stability