Abstract:Based on anion/cation solvation strategy through intermolecular interactions, balancing oxidative stability and interfacial stability, the 4.5 V‐class sodium‐ion battery breaks the bottleneck of highly active high‐voltage cathode interphase, achieving an energy density breakthrough of ≈450 Wh kg−1, which provides a new approach for realizing high‐voltage and long‐life sodium‐ion batteries and greater competitive potential than lithium‐ion batteries. High‐voltage sodium‐ion batteries (SIBs) are one of the most promising energy storage technologies for abundant resources and cost‐efficiency. However, their low energy density compared with lithium‐ion batteries (LIBs) hinders their practical applications. The high reactivity of high‐voltage cathodes, the primary factor, leads to deterioration of electrode/electrolyte interphase. Herein, a novel anion/cation solvation strategy is innovatively proposed for a ternary low‐concentration electrolyte that tackles the critical bottleneck of unstable electrode/electrolyte interphase. Especially, the intermolecular interaction within as‐designed electrolyte is remodeled by weakly polar fluorinated co‐solvent (ethoxy(pentafluoro)cyclotriphosphazene, PFPN) compared with traditional carbonate‐based electrolytes. PFPN can not only stabilize propylene carbonate (PC), reduce the interaction of Na+‐PC, ClO4−, accelerating Na+ desolvation, but also weaken the interaction of anions to form stable organic/inorganic composite cathode electrolyte interphase (CEI). In this work, the ionic conductivity of low‐concentration electrolyte increases to 6.12 mS cm−1 and the oxidation stability is successfully extended to 4.84 V. And Na3V2(PO4)2F3 (NVPF)||Na half‐cells present excellent cycling performance with average coulombic efficiency of 99.5% after 2000 cycles at 4.5 V and NVPF||hard carbon (HC) full cells with relatively high energy density (≈450 Wh kg−1) competitive to commercial LIBs, which are expected to be coupled with higher voltage cathodes to achieve higher energy density in future.

Electrode Engineering Study Toward High‐Energy‐Density Sodium‐Ion Battery Fabrication

Engineering of Polyanion Type Cathode Materials for Sodium‐Ion Batteries: Toward Higher Energy/Power Density

Engineering of Polyanion Type Cathode Materials for Sodium-Ion Batteries: Toward Higher Energy/Power Density

High-areal-capacity Na-ion battery electrode with uncompromised energy and power densities by simultaneous electrospinning-spraying fabrication

In situ characterizations of advanced electrode materials for sodium-ion batteries toward high electrochemical performances

Emerging high voltage V4+/V5+ redox reaction in Na3V2(PO4)3-based cathode for sodium-ion batteries

Na3V2(PO4)3: an advanced cathode for sodium-ion batteries

Biomass Hyaluronic Acid to Construct High-Loading Electrode with Fast Na+ Transport Structure for Na3V2(PO4)(3) Sodium-Ion Batteries

Robust cross‐linked Na3V2(PO4)2F3 full sodium‐ion batteries

Cross-Linking Hollow Carbon Sheet Encapsulated CuP2 Nanocomposites for High Energy Density Sodium-Ion Batteries.

Na3V2(PO4)3 Cathode Materials for Advanced Sodium-Ion Batteries: Modification Strategies and Density Functional Theory Calculations

Anion/Cation Solvation Engineering for a Ternary Low‐Concentration Electrolyte toward High‐Voltage and Long‐Life Sodium‐Ion Batteries

Enhanced Sodium Storage Performance by Improving the Utilization of NiS Through Electrode Membrane 3D Hierarchical Porous Structure

Two-dimensional Materials As Sodium-Ion Battery Anodes: the Mass Transfer and Storage Mechanisms of “fat” Na+

Challenges in Developing Electrodes, Electrolytes, and Diagnostics Tools to Understand and Advance Sodium-Ion Batteries

3D Printed Sodium‐Ion Batteries via Ternary Anode Design Affording Hybrid Ion Storage Mechanism

Enhancing the Initial Coulombic Efficiency of Sodium‐Ion Batteries via Highly Active Na2S as Presodiation Additive

Sodium Ion Storage in Na4MnV(PO4)3@C Free‐Standing Electrode

Design of High-Performance Cathode Materials with Single-Phase Pathway for Sodium Ion Batteries: A Study on P2-Nax(LiyMn1-y)O2 Compounds

Research progress on Na3V2(PO4)2F3-based cathode materials for sodium-ion batteries

Enhancing the Initial Coulombic Efficiency of Sodium-Ion Batteries Via Highly Active Na2 S As Presodiation Additive.