Abstract:Self‐assembly at the nanoscale enables spontaneous growth of perovskite‐derived oxide over double perovskite oxide. The specific composition and unique structure generate a synergetic effect between them and enable superior cathodic electrochemical reactions, when being used as cathode materials of protonic ceramic fuel cells. As a consequence, the cell performances are greatly boosted. Robust catalytic materials with high activity and stability play important roles in energy conversion and storage devices such as protonic ceramic fuel cells (PCFCs), in which a favourable cathode should possess high oxygen ion, proton and electron triple conductivities, and superior surface oxygen exchange kinetics. Herein, a thermal‐driven self‐construction phenomenon in cation‐nonstoichiometric Ba1+xGd1‐xCo2O6‐δ is reported, accordingly developing a new type of nanocomposite, that is, double perovskite BaGdCo2O6‐δ (DP‐BGCO) anchored by perovskite‐derived BaCoO3‐δ (P‐D‐BCO) nanoparticles, which, used as the cathode of PCFCs, demonstrates low area‐specific resistances of 0.053 and 0.026 ohm cm−2 respectively at 650 and 700 °C over BaZr0.3Ce0.5Y0.1Yb0.1O3‐δ protonic electrolyte and attractive peak power densities of 0.87 (650 °C) and 1.15 W cm−2 (700 °C) with outstanding stability, much superior to the similar cell with single‐phase BCO or BGCO cathodes. The synergy between the two components brings the outstanding performance with the mixed oxygen ion and electronic conducting perovskite‐derived oxide showing superior catalytic activity for oxygen reduction reaction while the double perovskite provides good bulk protonic conductivity to enlarge reaction sites. Such selective self‐construction, well manipulated through the A‐site cation stoichiometry engineering, provides a facile way for developing new high‐performance electrocatalysts with broad application potential.

On the Role of Bimetal‐Doped BaCoO3−δ Perovskites as Highly Active Oxygen Electrodes of Protonic Ceramic Electrochemical Cells (Adv. Energy Mater. 14/2024)

Bismuth Doped Sr2Fe1.5Mo0.5O6-δ Double Perovskite As a Robust Fuel Electrode in Ceramic Oxide Cells for Direct CO2 Electrolysis

Bismuth doped Sr2Fe1.5Mo0.5O6-3 double perovskite as a robust fuel electrode in ceramic oxide cells for direct CO2 electrolysis

Hexagonal Perovskite Ba0.9Sr0.1Co0.8Fe0.1Ir0.1O3−δ As an Efficient Electrocatalyst Towards the Oxygen Evolution Reaction

Hexagonal Perovskite Ba0.9Sr0.1Co0.8Fe0.1Ir0.1O3-delta as an Efficient Electrocatalyst towards the Oxygen Evolution Reaction

An Unbalanced Battle in Excellence: Revealing Effect of Ni/Co Occupancy on Water Splitting and Oxygen Reduction Reactions in Triple-Conducting Oxides for Protonic Ceramic Electrochemical Cells

Indium‐Doping‐Induced Nanocomposites with Improved Oxygen Reaction Activity and Durability for Reversible Protonic Ceramic Electrochemical Cell Air Electrodes

Developing Advanced Oxygen Electrodes for Reversible Protonic Ceramic Electrochemical Cells Via Controlled Bismuth Doping on Diverse Perovskite Lattice Positions

Data-driven discovery of electrode materials for protonic ceramic cells

Designing Highly Active and CO2 Tolerant Heterostructure Electrode Materials by a Facile A-site Deficiency Strategy in Pr1-xBaCo2O5+δ Double Perovskite

High-temperature Water Oxidation Activity of a Perovskite-Based Nanocomposite Towards Application As Air Electrode in Reversible Protonic Ceramic Cells

Spontaneous Growth of Perovskite‐Derived Oxide over Double Perovskite Surface for Enhancing Cathodic Performance in Protonic Ceramic Fuel Cells

Robust Bifunctional Phosphorus-Doped Perovskite Oxygen Electrode for Reversible Proton Ceramic Electrochemical Cells

High Cationic Dispersity Boosted Oxygen Reduction Reactivity in Multi-Element Doped Perovskites

La-Doped Ba0.5Sr0.5Co0.8Fe0.2O3−δ Air Electrodes with Enhanced Performance and Stability for Reversible Protonic Ceramic Cells

Designing Highly Active and CO 2 Tolerant Heterostructure Electrode Materials by a Facile A-site Deficiency Strategy in Pr 1-X BaCo 2 O 5+δ Double Perovskite

Constructing an active and stable oxygen electrode surface for reversible protonic ceramic electrochemical cells

In Situ Engineering of a Cobalt‐free Perovskite Air Electrode Enabling Efficient Reversible Oxygen Reduction/evolution Reactions

Magnesium Tuned Triple Conductivity and Bifunctionality of BaCo0.4Fe0.4Zr0.1Y0.1O3-δ Perovskite Towards Reversible Protonic Ceramic Electrochemical Cells

Electrocatalysis: Co‐doping Strategy for Developing Perovskite Oxides As Highly Efficient Electrocatalysts for Oxygen Evolution Reaction (adv. Sci. 2/2016)

Recent progress in oxygen electrodes for protonic ceramic electrochemical cells