Abstract:Energy and environmental issues have always been topics of great concern to the world in recent years. The production of electricity from solar and wind energy has increased dramatically. These significant developments in renewable energy technologies are now driving the development of a method to efficiently store and transport the inherently intermittent electricity from these natural resources [1]. Under this situation, the emergence of reversible solid oxide cells (RSOCs) has been attracted widespread attention. As a clean and efficient electrochemical conversion device, RSOCs can link electrical and chemical energy and convert flexibly, which is of great significance for power generation and energy storage [2]. It can operate in two modes: (i) as solid oxide fuel cells (SOFCs) for power production and (ii) as solid oxide electrolysis cells (SOECs) for hydrogen and oxygen production [3]. Herein, we successfully synthesized a novel perovskite Pr0.8Ca0.2Fe0.8Co0.2O3- δ and used it as an air electrode in reversible solid oxide cells. In the SOFCs mode, the peak power density is up to 1.056 W cm-2 at 850 ºC using hydrogen as the fuel and air as the oxidant. It can achieve 1.43 A cm-2 at 850 ºC under an operating voltage of 1.3 V in the SOECs mode with water content of 50%. Moreover, the cell can run stably in both SOFCs and SOECs modes with showing excellent reversibility. During a short-time reversible term, it remains both electrochemical performance and structure stable. These results demonstrate that the perovskite Pr0.8Ca0.2Fe0.8Co0.2O3- δ is promising air electrode for applications in RSOCs. References [1] Choi S, Davenport T C, Haile S M. Protonic ceramic electrochemical cells for hydrogen production and electricity generation: exceptional reversibility, stability, and demonstrated faradaic efficiency. Energy & Environmental Science, 2019, 12(1): 206-215. [2] Y. Luo, Y. Shi, Y. Zheng, N. Cai, Reversible solid oxide fuel cell for natural gas/renewable hybrid power generation systems, J Power Sources, 340 (2017), pp. 60-70. [3] Meng X., Liu Y., Yang N., Tan X., Liu J., J.C. Diniz da Costa, Liu S. Appl. Energy, 205 (2017), pp. 741-748

Indium‐Doping‐Induced Nanocomposites with Improved Oxygen Reaction Activity and Durability for Reversible Protonic Ceramic Electrochemical Cell Air Electrodes

Self‐Configured Composites of Ruddlesden‐Popper Perovskite and Pr6O11 as Efficient and Durable Air Electrodes for Reversible Protonic Ceramic Electrochemical Cells

High-temperature Water Oxidation Activity of a Perovskite-Based Nanocomposite Towards Application As Air Electrode in Reversible Protonic Ceramic Cells

In Situ Engineering of a Cobalt‐free Perovskite Air Electrode Enabling Efficient Reversible Oxygen Reduction/evolution Reactions

Efficient and Stable In Situ Self‐Assembled Air Electrodes for Reversible Protonic Ceramic Electrochemical Cells

Highly Active Nanocomposite Air Electrode with Fast Proton Diffusion Channels Via Er Doping‐Induced Phase Separation for Reversible Proton Ceramic Electrochemical Cells

La-Doped Ba0.5Sr0.5Co0.8Fe0.2O3−δ Air Electrodes with Enhanced Performance and Stability for Reversible Protonic Ceramic Cells

Sn-doped Cobalt Containing Perovskite As the Air Electrode for Highly Active and Durable Reversible Protonic Ceramic Electrochemical Cells

Synergistic Bulk and Surface Engineering for Expeditious and Durable Reversible Protonic Ceramic Electrochemical Cells Air Electrode

Surface restructuring of a perovskite-type air electrode for reversible protonic ceramic electrochemical cells

Nano Film Pr2Ni0.8Cu0.2O4+δ Decorated La0.6Sr0.4Co0.2Fe0.8O3-δ Oxygen Electrode for Highly Efficient and Stable Reversible Solid Oxide Cells

An Unbalanced Battle in Excellence: Revealing Effect of Ni/Co Occupancy on Water Splitting and Oxygen Reduction Reactions in Triple-Conducting Oxides for Protonic Ceramic Electrochemical Cells

An efficient electrode for reversible oxygen reduction/evolution and ethylene electro-production on protonic ceramic electrochemical cells

One-pot Derived Thermodynamically Quasi-Stable Triple Conducting Nanocomposite As Robust Bifunctional Air Electrode for Reversible Protonic Ceramic Cells

Electrochemical Performance of Pr0.8Ca0.2Fe0.8Co0.2O3-δ As Air Electrode for Reversible Solid Oxide Cells

A Superior Catalytic Air Electrode with Temperature-Induced Exsolution Toward Protonic Ceramic Cells.

Robust Bifunctional Phosphorus-Doped Perovskite Oxygen Electrode for Reversible Proton Ceramic Electrochemical Cells

An Active and Robust Air Electrode for Reversible Protonic Ceramic Electrochemical Cells

Constructing an active and stable oxygen electrode surface for reversible protonic ceramic electrochemical cells

Surface Regulating of a Double‐Perovskite Electrode for Protonic Ceramic Fuel Cells to Enhance Oxygen Reduction Activity and Contaminants Poisoning Tolerance

An Efficient High‐entropy Perovskite‐type Air Electrode for Reversible Oxygen Reduction and Water Splitting in Protonic Ceramic Cells