Abstract:In this study, a carbon electrode was synthesized from carbon black (CB), reduced graphene oxide (rGO), and polyurethane (PU) and subsequently used as the collector for electrospinning. During electrospinning, nanofibers were deposited on the carbon film collector. The carbon electrode and the deposited nanofibers together formed a nanofiber carbon electrode. Finally, a stretchable and flexible nanofiber membrane-sensing electrode was successfully developed and applied in smart clothing for ECG and EMG monitoring. The nanofibers were generated from polyvinylidene difluoride (PVDF) and poly (3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT/PSS) via mixing and electrospinning. The addition of a conductive PEDOT/PSS polymer inhibited the formation of beads on the fiber and enhanced the integrity as well as the electrical conductivity of the fiber. In addition, a CB/rGO carbon film was used as the electrospinning collector. The addition of a dispersant to the carbon film improved its electrical conductivity as well as its stretchability. The results show that the nanofiber carbon electrode prepared by electrospinning exhibits a high electrical conductivity (surface resistance = 2.5 × 10<sup>1</sup> Ω/sq), high mechanical durability (a stable circuit was maintained after 3000 repeated uses), and a hydrophobic surface (water contact angle = 146°). Compared with a traditional commercial wet electrode (Ag/AgCl), the nanofiber carbon electrode developed in this study exhibited good contact with human skin and excellent durability. These merits make the nanofiber carbon electrode suitable for long-term biological signal recording. Furthermore, such an electrode can be integrated into wearable systems for healthcare monitoring.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00841?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00841</a>.FE-SEM micrographs of the powder form of carbon black and reduce graphene oxide; synthetic scheme for converting styrene-maleic anhydride and polyetheramine to the SMA-derived amido acid as the polymeric dispersants; FTIR spectra collected for validating the synthesis of SMA-M1000 copolymer; solubility test of the SMA-M1000 copolymer in different solvents; FE-SEM image of the CB/rGO/SMA-M1000 with three different weight ratio; surface resistance test of the CB/rGO/PU film; UV–vis spectra and the absorption coefficient results; FT-IR spectra and Raman analysis of SMA-M1000, rGO and rGO; EDS element analysis; relationship between the tensile stress and strain of carbon electrode and nano-fiber carbon electrode; plot of relative resistance change of carbon electrode and nano-fiber carbon electrode as a function of strain; GPC analysis results of the SMA-M1000 copolymer dispersant; solubility test results of the SMA-M1000 copolymer dispersant in different solvents; comparing the performance of present fiber electrode with those reported in the literature (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00841/suppl_file/el0c00841_si_001.pdf">PDF</a>)Mechanical stability of flexible electrodes: highly sensitive electrocardiogram and electromyography measurements (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00841/suppl_file/el0c00841_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

Transparent and Stretchable Graphene Electrode by Intercalation Doping for Epidermal Electrophysiology

PEDOT:PSS Hydrogel based Flexible Electrodes for Wearable ECG Monitoring

Highly conductive, stretchable, durable, skin-conformal dry electrodes based on thermoplastic elastomer-embedded 3D porous graphene for multifunctional wearable bioelectronics

A Bioinspired, Durable, and Nondisposable Transparent Graphene Skin Electrode for Electrophysiological Signal Detection

Highly conductive, stretchable, and breathable epidermal electrode based on hierarchically interactive nano-network.

Ultra-conformal skin electrodes with synergistically enhanced conductivity for long-time and low-motion artifact epidermal electrophysiology

Breathable and Stretchable Organic Electrochemical Transistors with Laminated Porous Structures for Glucose Sensing

Substrate-Free Multilayer Graphene Electronic Skin for Intelligent Diagnosis

Flexible and robust dry electrodes based on electroconductive polymer spray-coated 3D porous graphene for long-term electrocardiogram signal monitoring system

Multilayer Graphene Epidermal Electronic Skin.

Highly breathable, surface-hydrophobic and wet-adhesive silk based epidermal electrode for long-term electrophysiological monitoring

Stretchable, breathable, and washable epidermal electrodes based on microfoam reinforced ultrathin conductive nanocomposites

Ultrathin, Stretchable, and Breathable Epidermal Electronics Based on a Facile Bubble Blowing Method

A Highly Stretchable and Permeable Liquid Metal Micromesh Conductor by Physical Deposition for Epidermal Electronics

Highly Permeable and Ultrastretchable Liquid Metal Micromesh for Skin-Attachable Electronics

Recent Advances in Stretchable and Permeable Electrodes for Epidermal Electronics

Ultrapermeable and Wet-Adhesive Monolayer Porous Film for Stretchable Epidermal Electrode.

Breathable, Self-Adhesive Dry Electrodes for Stable Electrophysiological Signal Monitoring During Exercise

Substrate-free ultra-thin epidermal bioelectrodes with enhanced conformality and breathability for long-term physiological monitoring

Facile Fabrication of a Stretchable and Flexible Nanofiber Carbon Film-Sensing Electrode by Electrospinning and Its Application in Smart Clothing for ECG and EMG Monitoring

Facile Fabrication of Robust and Reusable PDMS Supported Graphene Dry Electrodes for Wearable Electrocardiogram Monitoring