Abstract:Maglev, offers competitive journey-times compared to the railway and subway systems in markets for which distance between the stations is 100-1600km owing to its high acceleration and speed; however, such systems may have excessive vibration. Field measurements of Maglev train-induced vibrations were therefore performed on the world's first commercial Maglev line in Shanghai, China. Seven test sections along the line were selected according to the operating conditions, covering speeds from 150 to 430km/h. Acceleration responses of bridge pier and nearby ground were measured in three directions and analyzed in both the time and frequency domain. The effects of Maglev train speed on vibrations of the bridge pier and ground were studied in terms of their peak accelerations. Attenuation of ground vibration was investigated up to 30m from the track centerline. Effects of guideway configuration were also analyzed based on the measurements through two different test sections with same train speed of 300km/h. The results showed that peak accelerations exhibited a strong correlation with both train speed and distance off the track. Guideway configuration had a significant effect on transverse vibration, but a weak impact on vertical and longitudinal vibrations of both bridge pier and ground. Statistics indicated that, contrary to the commonly accepted theory and experience, vertical vibration is not always dominant: transverse and longitudinal vibrations should also be considered, particularly near turns in the track. Moreover, measurements of ground vibration induced by traditional high-speed railway train were carried out with the same testing devices in Bengbu in the Anhui Province. Results showed that the Maglev train generates significantly different vibration signatures as compared to the traditional high-speed train. The results obtained from this paper can provide good insights on the impact of Maglev system on the urban environment and the quality of human life nearby.

Tracking of car body vibration performance of centralized power EMU

Analysis of Vibration and Frequency Transmission of High Speed EMU with Flexible Model

Study of Ground Vibration from Trains Caused by Track Irregularities

Analysis and Control of Abnormal Vibration of End Wall on High-Speed Electric Multiple Units

RESEARCH ON VIBRATION MONITORING DEVICE AND ALARM THRESHOLD OF CARDAN SHAFT DRIVE SYSTEM OF EMU

Influence of electrical part of traction transmission on dynamic characteristics of railway vehicles based on electromechanical coupling model

Influence of Driving Equipment Flexibly Suspended on Frame on Dynamic Performance of High-Speed EMU

Research on Coordinated Control Method of PMSMs Traction System in EMU Train

Track Irregularities Estimation Based on the Vibration of Car-Body

Investigation of Environmental Vibration Control for High Speed and Heavy Haul Railway

Carbody abnormal lateral vibration failure of high–speed train induced by the coupling factor of the wheel re–profiling method and excessive rail wear

Field measurements and analyses of environmental vibrations induced by high-speed Maglev

Diagnosis Technology Investigation on High-Speed EMU Axle-box Bearings with Local Damages

Experimental study of bogie instability monitoring and suppression measures for high-speed EMUs

Coupling effect of track irregularity and wheel–rail contact conicity on carbody swaying of a metro vehicle: an experimental investigation

Random vibration analysis of tram-track interaction on a curve due to the polygonal wheel and track irregularity

Field Testing and Analysis of Embankment Vibrations Induced by Heavy Haul Trains

Investigation on influencing factors of wheel polygonization of a plateau high-speed EMU train

Experimental and Numerical Investigation on Multi-module Coupling Vibration Performance of Light Rail Vehicle

Development and engineering application of integrated safety monitoring system for China's high-speed trains