Abstract:In this paper, a Finite-Element (FE) numerical investigation on timber-to-timber joints and composite beams with inclined self-tapping screws (STSs) is presented. Based on past experimental data and numerical literature efforts, full 3D solid FE models of selected geometrical and mechanical configurations of technical interest are implemented in ABAQUS software package and analysed under static loading conditions. The typical push-out samples include GL24h timber members with several types (WT-T-8.2, 190 mm and 220 mm their length), layouts (2 + 2, 4 + 4, 2 + 2 X-shaped) and inclination of screws (up to ±45°). For the full-scale beam samples in bending (8 m their span), composite systems consisting of GL24h timber beam, wooden plank, spruce floorboards and STSs are investigated. There, the STS joints take the form of two-rows or X-shaped connections, respectively (45° or 90° their inclination), including four screw types and different spacing. In both the push-out and full-scale cases, simple modelling approaches are taken from the ABAQUS library and adapted to the timber-to-timber structural system under investigation, so as to explore their structural performance in the elastic and post-damage phases, up to failure. A key role in the typical FE models is assigned to input material properties and mechanical contacts, including damage constitutive laws so as to reproduce possible local failure phenomena in the timber or steel components, as well as cohesive damage interactions for the joints. The presented FE models are calibrated in accordance with past research studies, and validated – for the examined structural typology – against experimental results available in literature. Comparative calculations are hence presented, based on the collected numerical, experimental and analytical estimations for the selected samples. As shown, the examined modelling approach can reasonably capture the expected performance of timber-to-timber joints and composite systems.

Numerical modelling of the structural response of a novel hybrid densified wood filled-aluminium tube dowel for structural timber connections

Bio-based Connections and Hybrid Planar Truss

Glubam Roof Truss with Riveted Glubam Connections Adopting Thin-Walled Steel Tube: Experiment, Modeling, and Model-Updating

Numerical modelling of lockbolted lap connections for aluminium alloy plates

Experimental, Finite Element and Analytical Characterization of Hysteretic Response of Ductile Connections with Nailed Angle Brackets for Mass Timber Structures

Three-dimensional numerical analyses of load-bearing behavior and failure of multiple double-shear dowel-type connections in timber engineering

Numerical analysis of timber-to-timber joints and composite beams with inclined self-tapping screws

Analytical Model for Non-linear Relationships of Dowel-Type Timber Connections Exposed to Fire

Experimental and Numerical Investigations on the Hybrid Dowel and Bonding Steel Plate Joints for Timber Structures

Densified wood dowel reinforcement of timber perpendicular to the grain: a pilot study

Numerical and Experimental Analysis of the Load-Carrying Capacity of a Timber Semi-Rigid Dowel-Type Connection

Beam-on-Foundation modelling of dowel-type single fastener connections in cross laminated timber

Verification and Validation of finite element models for laminated timber structures using solid, solid-beam and solid-shell approaches

In-plane testing and hysteretic modeling of steel-spline cross-laminated timber diaphragm connection with self-tapping screws

Influence of the joining technique on the structural behaviour of hybrid timber-steel cross-sections

Bolted steel to laminated timber and glubam connections: Axial behavior and finite-element modeling

Numerical and Experimental Analysis of the Rotational Stiffness of a Timber Semi-Rigid Dowel-Type Connection

Rotational Stiffness and Carrying Capacity of Timber Frame Corners with Dowel Type Connections

Axial load-deformation behavior and fracture characteristics of bolted steel to laminated timber and glubam connections

Mechanical properties of timber-concrete connections with steel tube connectors

Numerical modelling and analysis of post-tensioned timber beam-column joint