Stable Co-Continuous PLA/PBAT Blends Compatibilized by Interfacial Stereocomplex Crystallites: Toward Full Biodegradable Polymer Blends with Simultaneously Enhanced Mechanical Properties and Crystallization Rates
Jiali Chen,Chenyan Rong,Taotao Lin,Yihang Chen,Jiali Wu,Jichun You,Hengti Wang,Yongjin Li
DOI: https://doi.org/10.1021/acs.macromol.0c02861
IF: 5.5
2021-03-03
Macromolecules
Abstract:Constructing stable co-continuous morphology of commercial immiscible polymer blends remains an ongoing challenge in terms of complex presynthetic routes, multiple parameter dependency, and intrinsic instability of phase morphology. Herein, we demonstrate a full biodegradable polymer blend, poly(lactic acid) (PLA) and poly(butylene adipate-<i>co</i>-terephthalate), where hitherto inaccessible co-continuous with asymmetric compositions (70/30) can be obtained with the assistance of interfacial stereocomplex crystallites (i-SCs) through reactive blending. By taking full advantages of this unprecedented compatibilizer, nanostructured co-continuous blends with synergistically enhanced comprehensive performance are achieved. First, due to the "rigid" i-SC, co-continuous morphology is induced through a simple melt blending procedure; second, considerable augmentation of the crystallization rate of the PLA matrix is accomplished on account of the <i>in situ</i> formed nucleation agent (<i>i.e.</i>, i-SC); third, a super toughened material with simultaneously enhanced tensile strength, ductility, and impact strength can be acquired, resulting from the i-SC-induced co-continuous morphology; and fourth, i-SC can function as a "rigid" supporting layer between phases even above 200 °C, resulting in significantly enhanced morphology stability in melt. The versatile, facile, and practical strategy offers an industrially relevant technique to fabricate super-robust and fully biobased polymer materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.macromol.0c02861?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.macromol.0c02861</a>.Molecular formula of reactive compatibilizers: SG, SG-<i>g</i>-PLLA, and SG-<i>g</i>-PDLA, and the corresponding grafted product through reactive blending: SG-<i>g</i>-PLLA-<i>g</i>-PBAT and SG-<i>g</i>-PDLA-<i>g</i>-PBAT; torque values <i>versus</i> time of PBAT/SG (50/6) blends and PLLA/SG (50/6) recorded during melt blending; <sup>1</sup>H NMR spectra of SG, PDLA, PBAT, and grafted copolymer after sequential reactive blending and selective extraction of free PLAs and PBAT by acetonitrile and toluene, respectively; stress–strain curves of LSB-blend and DSB-blend specimens; digital picture of the LSB-blend and DSB-blend after impacted measurements; SEM images for impact-fractured surfaces of LSB-blends and DSB-blends; stress–strain curves and notch impact strength of the DSB-blend with the SC located in the PLA matrix and anchoring at the PLA-PBAT interface; mechanical parameters for the pristine blend, LSB-blend, and DSB-blend; and mechanical and thermo parameters for super-toughened PLA/biobased (70/30) polymer blends (<a class="ext-link" href="/doi/suppl/10.1021/acs.macromol.0c02861/suppl_file/ma0c02861_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.