Abstract:The widespread use of fiber-reinforced concrete in construction is due to a number of their advantages. However, despite many years of research in this direction, scientists from different countries describe data obtained experimentally, the results of which differ. In some cases, the results obtained differ not only numerically, but also fundamentally. Basically, these are fibers of artificial origin, which are used for the manufacture of fiber-reinforced concrete. The most commonly used metal, polymer, basalt, glass fibers. To a lesser extent, carbon and polyamide fibers are used. It should be noted that the effectiveness of polyamide fiber is very doubtful, primarily because of the tendency of this type of fiber to swell. At present, the cost of carbon fiber is quite high, which is the main obstacle to its widespread use in concrete. Metal and glass fibers are subject to corrosion, and this adversely affects the properties of concrete. Since road and airfield concretes are used in aggressive conditions, these shortcomings do not allow the use of metal, glass, carbon and polyamide fibers in them. However, it follows from the analysis of the literature that the greatest controversy concerns the use of basalt and polypropylene fibers. The greatest controversy concerns the use of basalt and polypropylene fibers. There is no consensus which of these types of fiber is more effective for use in concrete. What amount of fiber should be introduced into the concrete mixture to achieve the maximum result is also unknown. This has led to the fact that basalt and polypropylene fibers are used very rarely in road and airfield concrete. The article presents an analysis of the results of the use of polypropylene and basalt fibers in concrete, obtained by researchers in different countries. The experimental data obtained by the authors are shown. The main attention is paid to the comparative efficiency of the use of these types of fibers. Strength, frost resistance and abrasion of road concrete are taken as criteria for evaluating the effectiveness. Quantitative intervals for the use of each type of fiber are established.

Substantiation of the distribution law and statistical characteristics of the fiber filaments length for reinforcing asphalt concrete mixture

Study On The Anti-Cracking Performance Of Fibrous High-Viscoelastic Asphalt Sand

Modification of conditions and properties of dispersed reinforcing fiber during construction and operation of asphalt concrete pavements

COMPARISON OF FIBER CONCRETE PROPERTIES FOR INDUSTRIAL FLOORS AND ROAD PAVEMENTS WITH STEEL AND POLYPROPYLENE FIBER

An Analysis of the Transfer Lengths of Different Types of Prestressed Fiber-Reinforced Polymer Reinforcement

Evaluation and Design of Fiber-Reinforced Asphalt Mixtures

Influence of Fiber Dispersion and Distribution on Flexural Tensile Properties of Asphalt Mixture Based on Finite Element Simulation

Fiber-Reinforced Asphalt Mixture Design on Anti-Skid Surfacing for Field Testing High-Speed Vehicles on Pavements

Experimental study of fibers in stabilizing and reinforcing asphalt binder

Modification and Enhancing Contribution of Fiber to Asphalt Binders and Their Corresponding Mixtures: A Study of Viscoelastic Properties

Performance of Fiber Reinforced Asphalt Concrete under Environmental Temperature and Water Effects

COMPARATIVE CHARACTERISTICS OF THE APPLICATION OF POLYPROPYLENE AND BASALT FIBER IN ROAD CONCRETE

Research on Fracture Behavior of Fiber–Asphalt Mixtures Using Digital Image Correlation Technology

Compressive properties and analytical modelling for stress-strain curves of polyvinyl alcohol fiber reinforced concrete

Evaluation of the Effect of Fiber Type, Length, and Content on Asphalt Properties and Asphalt Mixture Performance

Experimental Investigation on the Mechanical Properties of Polypropylene Hybrid Fiber-Reinforced Roller-Compacted Concrete Pavements

Investigating Low-Temperature Cracking Behavior of Fiber-Reinforced Asphalt Concrete Materials

Residual Strength and Drying Behavior of Concrete Reinforced with Recycled Steel Fiber from Tires

Investigation on the Flexural–Tensile Rheological Behavior and Its Influence Factors of Fiber-Reinforced Asphalt Mortar

Fracture Properties of Ultra-Thin Friction Course Mixture Containing Reclaimed Asphalt Pavement and Glass Fiber under Monotonic and Cyclic Loading

Utility of Aramid, Polyolefin and Polypropylene Combination in Hot Mix Asphalt as a Fiber Material