Abstract:Much of surplus ammunition stockpile inevitably requires demilitarized processing technology in the explosives industry. For the safe waste treatment and recycle, the thermoplastic polymer bonded explosive (PBX) can effectively reduce the military cost and non-conforming products. In addition, the thermoplastic PBX has excellent application prospect as the future explosive due to the good mechanical properties and insensitivity. However, for high solid content, most of thermoplastic PBXs still maintain a considerable viscosity even in high-temperature melting state, rendering traditional casting process unsuitable. In this study, a measuring method was adopted to accurately obtain the correlation of Pressure-Volume-Temperature (PVT) for the simulative materials of thermoplastic PBX at first. The equations of state for PVT and viscosity model were then created, which are of great significance in single screw extrusion. An experiment system of single screw extrusion was designed to implement the molding process considering the poor liquidity problem of the thermoplastic materials. Excellent molding stability (rho<0.5 % variation) was achieved for the extrusion system. Moreover, a numerical investigation was also performed. Good agreements were yielded by comparing the simulation data and experimental results. The effects of operational parameters, i. e., the entrance pressure, barrel temperature and rotation speed on molding process of the thermoplastic materials were investigated in detail. The wall shear stress decreases with the feed inlet well sealed whereas the maximum temperature rise increases a little due to limited thermal diffusion. Either increasing temperature or decreasing rotation speed is beneficial to overall process safety. However, production cycle and attainable molding density also need to be considered at the same time. Furthermore, the process parameters should be optimized on the basis of the PVT and viscosity properties of material in practice. The investigations above can be a better guidance for the development and implementation of thermoplastic PBXs molding process.

SOFT PVC COMPOUNDING EXTRUDER DESIGN

Study on the fusion properties of extruded foaming rigid PVC

Development of technology of special material for hard PVC sections(Synthesis of special material for PVC modification by CPE)

Study on the Lubrication Behavior of Low Molecular Weight Poly(vinyl Chloride-Co-n-butyl Acrylate-Co-vinyl Acetate) Ternary Copolymer in Rigid PVC

Study of PVC/CM Thermoplastic Elastomer

Influences of individual and composed poly(vinyl alcohol) suspending agents on particle morphology of suspension poly(vinyl chloride) resin

Influence of composition on physical and mechanical properties of modified PVC

Cooperation Between Chemical and Physical Crosslinking in Plasticized and Lightly Chemical Crosslinked Poly(Vinyl Chloride)

Effects of Physical Crosslinking on Properties of Plasticized High Molecular Weight PVC

Structure and Properties of Poly(vinyl Chloride)/dodecyl Sulfonate-pillared Hydrotalcite Composites

Synthesis, Modification, and Applications of Poly(vinyl chloride) (PVC)

Experimental and Numerical Analysis of Single Screw Extrusion Process for Thermoplastic PBX Based on PVT Properties

Synthesis Internal-Plasticized PVC Copolymer Resin from Industrial Application View: Copolymerization of Vinyl Chloride with Poly(ethylene Glycol) Monomethyl Ether Methacrylate Via Suspension Polymerization

A Novel One-Step Reactive Extrusion Process for High-Performance Rigid Crosslinked PVC Composite Fabrication Using Triazine Crosslinking Agent@Melamine-Formaldehyde Microcapsules

Influences of Processing Conditions on the Glass Transition of Soft Poly(vinyl Chloride) Compounds Filled with Calcium Carbonate

The Effect of Dicarboxylic Acid Structure on the Plasticizing Ability of Its Ester

Study of the Properties of the Composition Obtained Based on Mixtures of Polyvinyl Chloride and Ethylene-Propylene Copolymers

4D Printing of Polyvinyl Chloride (PVC): A Detailed Analysis of Microstructure, Programming, and Shape Memory Performance

A Study of Plant-Filled Polymer Composites Based on Highly Plasticized Polyvinyl Chloride

Effect of Chemical Blowing Agent on the PVC Cellular Coating Extrusion

Preparation and Characterization of Composites Materials with Rubber Matrix and with Polyvinyl Chloride Addition (PVC)