Abstract:Mechanical properties of Al alloys make them an ideal candidate for different sections of marine, aerospace, automotive, etc. industries. Recently taking the advantages of additive manufacturing (AM), many complex infrastructures/components can be fabricated with very high design freedom via Al alloys. Although Al alloys have good natural corrosion resistance, however improving this property attracts lots of attention in the past few years. Post-processing methods can play a key role for addressing the issues related to internal and surface anomalies associated with as-built AM parts. Generally, these anomalies have detrimental effects on mechanical properties. In the present study, the effect of laser shock peening (LSP) treatment with different laser pulse overlaps and energies was investigated comprehensively on microstructure, surface texture, porosity, hardness, residual stresses as well as corrosion resistance of laser powder bed fused (L-PBF) AlSi10Mg samples. LSP provides strain deformation on the surface, and the deformation enhances by laser beam energy. LSP1 (laser energy of 1.5 J and 50% overlap) and LSP3 (laser energy of 4.5 J and 50% overlap) introduce maximum local strain of 7.5 and 10.7, respectively. The surface roughness of as-built state μm in terms of Rv was effectively diminished to 16.33 after LSP6 (laser energy of 4.5 J and 75% overlap). The results indicated that due to the modified surface texture, improved hardness and induced high compressive residual stresses in the surface layer. (surface hardness improvement and inducing high surface compressive residual stresses were obtained after LSP6 up to 26% and −289 MPa, respectively); the LSP treated samples exhibited higher corrosion resistance with the corrosion rate decreasing down to 50% as compared to the as-built state.

Improving mechanical property and corrosion resistance of high electrical conductivity Al-Ce-Sc-Y and Al-Mg-Si-Ce-Sc-Y alloys by laser shock peening

Effect of Laser Shock Peening on Corrosion Behaviors of Ultra-High Strength Al-Zn-Mg-Cu Alloys Prepared by Spray Forming and Ingot Metallurgy

Effect of Multiple Laser Shock Peening on Microstructure, Crystallographic Texture and Pitting Corrosion of Aluminum-Lithium Alloy 2060-T8

Microstructural evolution and mechanical behaviors of Al-Cu-Li alloy processed by laser shock peening

Effect of laser shock peening on the dissolution of precipitates and pitting corrosion of AA6061-T6 with different original surface roughness

Impact of laser shock peening on microstructure hardness and corrosion properties of AA6061 alloy

Effects of Laser Shock Peening on Corrosion Resistance of Additive Manufactured AlSi10Mg

The effect of laser shock processing on the microstructures and properties of 2060 Al Li alloys

Laser Shock Peening of SiCp/2009Al Composites: Microstructural Evolution, Residual Stress and Fatigue Behavior

Influence of laser shock peening on surface characteristics and corrosion behavior of zirconium alloy

Strengthening CrFeCoNiMn0.75Cu0.25 high entropy alloy via laser shock peening

Tailoring surface properties and corrosion resistance of laser shock peened Ti6Al4V alloy by low-temperature annealing

Comparison of Mechanical and Corrosion Properties of 7050 Aluminum Alloy after Different Laser Shock Peening

Effect of Low energy laser shock peening on plastic deformation, wettability and corrosion resistance of aluminum alloy 7075 T651

Laser shock peening regulating aluminum alloy surface residual stresses for enhancing the mechanical properties: Roles of shock number and energy

Influencing laser shock peening treatment of the mechanical, tribological, corrosion, and microstructural characteristics on AA5052 alloy

Comparison of surface integrity of GH4169 superalloy after high-energy, low-energy, and femtosecond laser shock peening

Improved Properties of Wire Arc Directed Energy Deposited Thin-Walled Al-6Mg-0.3Sc Component Via Laser Shock Peening

Microstructure and mechanical properties of laser shock peened 38CrSi steel

Effect of laser shock peening on tribological properties of magnesium alloy ZK60

Microstructure and mechanical properties of composite strengthened high-chromium cast iron by laser quenching and laser shock peening