Abstract:Purpose The purpose of this work is to perform the finite element analysis (FEA) for the numerical discretization of sections with different arrangements of Web openings to investigate the torsion behavior. Typical hexagonal and circular Web opening sections are extensively used in steel construction due to economic development in building design. However, the use of sections with different arrangements of Web opening had improved the performance of the section with Web opening in terms of structural behavior which leads to economic design compared to typical I-beam. Design/methodology/approach The accuracy of FE results allows extensive numerical analysis of stress concentration magnitude for sections with Web openings, concentrating on the sizes and positions of the Web opening. Five shapes and three sizes of Web opening are used in this work. The shapes involved are c-hexagon, hexagon, octagon, circular and square, whereas the sizes of the Web opening involved are 0.67 D, 0.75 D and 0.80 D where D is the height of the Web. Two types of models for 200 × 100 × 8×6 mm steel section involved which is Model 1, where the section with 50 mm edge and 150 mm center-to-center distance and Model 2, where the section with 100 mm edge and 200 mm center-to-center distance. Findings It was found that these configurations affect the section with various shapes of Web openings sizes (0.67 D, 0.75 D, and 0.80 D). This also includes the spacing distances, with 50 mm edge and 150 mm center-to-center distance and also a section with 100 mm edge and 200 mm center-to-center distance. Through the FEA results of Model 1 and Model 2, it is found that 50% reduction in horizontal member length in hexagon Web opening, from 50 mm to 20 mm, caused increment about 30%–53% stress concentration in Web for c-hexagon. However, for a stress analysis of c-hexagon, geometry resulted in a lower stress concentration in the Web than other Web opening. Originality/value Additionally, the work emphasized the efficiency of Web opening shapes by using an appropriate Web opening radius in section with c-hexagon, hexagon, octagon, square and circular shapes. The final results show the contribution of appropriate Web opening radius to increase the section torsional capacity. It is observed that the torsional capacity at certain loading condition and its angle of twist is analysed.

UNDAMPED FORCED VIBRATION ANALYSIS OF CASTELLATED STEEL BEAM WITH CIRCULAR, SQUARE AND PENTAGONAL WEB OPENINGS

Influence of the web opening shapes on the bending and free vibration responses of castellated steel beams

Experimental and Finite Element Method of Castellated Steel Beam with and without Hexagonal web opening

Behaviour of Steel I Beams with Web Openings

The numerical assessment of stress distribution of I-beam with web opening

Assessment of lateral-torsional buckling capacity of mild steel castellated beam with sinusoidal web openings

Experimental and Analytical Investigation of Open Web Steel Beam Under Non-uniform Bending

On the Shear Force Redistribution in Composite Steel and Concrete Beams with Web Openings

Stress analysis of I-beam with web opening via finite element analysis and experimental study

Web-post buckling of bolted castellated steel beam with octagonal web openings

A Review Paper on Finite Element Analysis on Lateral Torsional Buckling Behavior of I Beam with Web Opening Using ETABS Software

THE MECHANICAL PERFORMANCE OF SINGLE DIAGONAL LACING DOUBLE-WEB STAY MEMBERS OF OPEN CONCRETE FILLED STEEL TUBES WITH FOUR MAIN ELEMENTS

The magnitude of stress concentration of I-beam with web opening because of lateral-torsional buckling effects

Performance of Composite Steel-Concrete Beam with Stiffener next to Web Opening

NUMERICAL INVESTIGATION OF AS-BUILT AND CARBON FIBER REINFORCED POLYMER RETROFITTED REINFORCED CONCRETE BEAM WITH WEB OPENINGS UNDER IMPACT LOADING

Progressive collapse analysis of beam–column substructures considering various reduced beam web sections

Comparative study of effect of web openings on the strength capacities of steel beam with trapezoidally corrugated web

Finite element analysis of reinforced concrete deep beams with square web openings using damage plasticity model

FEM Analysis on Bearing Capacity of Cold-formed Thin-walled Steel Beam with C-shaped Section Openings

Development of efficiency analysis for I-beam steel section with web opening via numerical method

Finite Element Analyses of Cold‐formed Stainless Steel Beam with Web Openings in Shear