Abstract:Several models were developed in the literatures for studying the system impedance characteristics during sub-synchronous oscillations (SSO). However, the doubly-fed induction generator (DFIG) impedance presents a 2 × 2 matrix with the frequency coupling component at the off-diagonal position, which increases the difficulty for analyzing the impedance characteristics of DFIG. The coupling effect in this case is caused by the asymmetric impedance characteristics of controllers, which are composed of voltage source converters (VSCs). Accordingly, simplifications are often conducted to decouple the impedance matrix into single sequences. Outer loop controller and phase-locked loop (PLL), which are often neglected in simplifications, are the main causes of the asymmetry of impedance matrix. Such simplifications could also hamper proper system stability analyses. In this paper, a comprehensive impedance model is proposed in which the outer loop controller, PLL, and grid-side controller (GSC) are all considered. The proposed comprehensive impedance model can provide exact stability data, in which stable boundaries for compensation level and transmission distances are presented. Furthermore, the proposed model is converted to simplified models in which the impacts of outer loop controller, PLL, GSC and coupling components on boundary stability of SSO are analyzed. The results are validated by time domain simulations and eigenvalue analyses, and deviations of the simplified models are analyzed for different operating parameters and conditions leading to simplifications.

Three-phase model of SCIG-based variable speed wind turbine for unbalanced DSLF analysis

Impedance Modeling and Analysis for DFIG-Based Wind Farm in SSO Studies

Three-Phase Steady-State Model of Doubly Fed Induction Generator Considering Various Rotor Speeds.

Integration of PMSG-Based Wind Turbine into Electric Power Distribution System Load Flow Analysis

Small Signal Modeling and Stability Analysis of A Dfig Based Wind Power System under Unbalanced Grid Voltage Condition

Rapid Modeling and Simulation Method for Inverter-interfaced Distributed Generators

Three-phase Steady-state Models for Distributed Generators

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

Modeling and Analysis of Rotor Current of DFIG with Rotor Chopper Circuit Operative Condition During Three-Phase Symmetric Faults

Modeling and Simulation of Variable-Speed Constant-Frequency Double-Fed Wind Generator

Modeling and simulation of a stand-alone wind turbine supplying an inductive load through a long cable

Simplified Model of Variable Speed Wind Turbine Generator for Dynamic Simulation Analysis

Steady State Modeling and Performance Analysis of a Wind Turbine-Based Doubly Fed Induction Generator System with Rotor Control

Three-phase DFIG steady model and fast three-phase load flow algorithm for distribution power systems

System Modeling and Simulation of a Wind Power Generation with Doubly Fed Induction Generator

Variable Speed Wind Turbine Generator System with Current Controlled Voltage Source Inverter

A New Simple Model of Wind Turbine Driven Doubly-fed Induction Generator for Dynamic Analysis of Grid Connected Large Scale Wind Farm

Study of Stabilty Analysis of a Grid Connected Doubly Fed Induction Generator Based on Wind Energy Application

Development Of Phasor Type Model Of Pmsg Based Wind Farm For Dynamic Simulation Analysis

Impact of Short-Circuit Ratio on Control Parameter Settings of DFIG Wind Turbines

A Shifted Frequency Impedance Model of Doubly Fed Induction Generator (DFIG)-Based Wind Farms and Its Applications on S$^2$SI Analysis