Abstract:In piezoelectric coupled shells, the distributed actuation force usually consists of four components, including the membrane force and bending moment in the longitudinal direction, and the membrane force and bending moment in the circumferential direction. For commonly used bi-axial piezoelectric materials, such as PZT and PVDF, these four components may have phase difference of pi or -pi. This leads to force cancellation and reduces the overall control effectiveness. Supposing that one piezoelectric actuator is uni-axial, for example only d(31) is not equal to zero, and then this actuator will generate actuation force with the first two components or the latter two, depending on the actuator configuration and the shell geometry/modes. Accordingly the force cancellation can be avoided or minimized. In this research, the Macro-Fiber Composite (MFC) actuators are used as uni-axial actuators. The dynamic equation of a conical shell is firstly given. Then the actuation force is derived based on the converse piezoelectric effect and thin shell assumptions. Three types of the MFC actuators are considered, including MF'C-P1, MFC-P2 and MFC-P3. Case studies are performed to evaluate the distributed actuation forces. Both axial and transverse vibrations of the conical shell are formulated to study the force cancellation of various shell modes, and the payload effects are considered in the analysis. The results show that, by using the MFC actuators, actuation force can be enhanced because force cancellation is avoided. The force enhancement becomes even more significant for membrane dominated modes, such as axial modes of shells with heavy payloads.

The Modeling Design and Analysis of Spherical-Cymbal Piezoelectric Transducer

Finite Element Analysis and Theoretical Model of Slotted Cymbal Composite Piezoelectric Transducer

Mathematical Modelling of One-Dimensional Piezoelectric Transducers Based on Monoclinic Crystals

A New-Style, Slotted-Cymbal Transducer with Large Displacement and High Energy Transmission

The Modeling of a Piezoelectric Transformer Using a Transverse Vibration

Analysis of Longitudinal and Torsional Resonance Vibrations of a Piezoelectrically Excited Bar by Introducing Piezoelectric Loss Coefficients

Parametric Analysis and Optimization of Radially Layered Cylindrical Piezoceramic/Epoxy Composite Transducers

Spatially Filtered Multi-Field Responses of Piezothermoelastic Cylindrical Shell Composites

Analysis of Cymbal piezoelectric generator's effective piezoelectric strain constant

Electromechanical Coupling and Signal Distribution of A Circular Cylindrical Shell Coupled with Segmented Sensors

An Original 2-D Analytical Model for Investigating Coupled Vibrations of Finite Piezoelectric Resonators

Systematic design and experimental realization of a radially cascaded spherical piezoelectric transducer

Diagonal Piezoelectric Sensors on Cylindrical Shells

Electromechanics And Vibrations Of Piezoelectric Shell Distributed Systems

An analytical model of a piezoelectric unimorph transducer with an aluminum cone

Research on Effective Electric-Mechanical Coupling Coefficient of Sandwich Type Piezoelectric Ultrasonic Transducer Using Bending Vibration Mode

Micro-Sensor Electromechanics and Distributed Signal Analysis of Piezo(Electric)-Elastic Spherical Shells

Control Force Enhancement Of Conical Shells Using Piezoelectric Macro-Fiber Composite

Theory on Hexagonal Symmetrical Piezoelectric Thick Shells Applied to Smart Structures

Analytical Modeling and Design of Fresnel Lens Transducers

Design and Simulation for Tri-Axial Piezoresistive Mems Accelerometer