Abstract:As a result of their reduced number of switches, three-phase four-switch (TPFS) inverters are generally applied as cost-reduction topologies for permanent magnet synchronous motor (PMSM) drives. However, the torque ripples of PMSM severely deteriorate the performance and reliability of the entire system. Hence, comprehensive considerations for torque ripple reduction, including high- and low-frequency torque ripples, are elaborated considering TPFS inverter-fed PMSM drives. The second-order torque harmonics produced by dc-capacitor voltage fluctuations are first demonstrated, and a very simple compensation method is presented by introducing a novel nonorthogonal coordinate transformation. Then, to evaluate the effects on the high-frequency torque ripples of space vector modulation (SVM) schemes, three SVM schemes for TPFS inverter-fed PMSM drives are assessed based on the torque ripple root-mean-square value. Consequently, the preferred SVM scheme is obtained for high-frequency torque ripple minimization. Moreover, the linear modulation range of the TPFS inverter-fed PMSM drive is derived considering capacitor voltage fluctuations, therein avoiding the low-frequency torque ripples caused by overmodulation. Meanwhile, an adaptive capacitor voltage offset suppression method is proposed to fully exploit the dc-link voltage. The experimental results demonstrate the validation and effectiveness of the proposed analysis and methods for torque ripple reduction.

Rotating Restart Method for TPFS Inverter-Fed Sensorless PMSM Drive System Based on Dual Effective Voltage Vectors Injection

Detection of Inter-Turn Short Circuit Fault for Dual Three-Phase PMSM Based on Vector Space Decomposition Scheme

Start method for PMSM without position sensor in rotating conditions

An Improved 3-Step Startup Method Based on Sensorless Vector Control of PMSM

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

Rotating High-Frequency Voltage Injection Based on Characteristic Harmonic Elimination

Inverter Reconstruction Approach for Open-End Winding Five-Phase PMSM With Pattern-Based Vector Synthesis and Hybrid SVPWM Modulation

Power Perturbation Based Virtual Signal Injection Control of MTPA for IPMSM Drive System

Sensorless control and start-up strategy of permanent magnet synchronous motor

Fault Tolerant Control of Harmonic Injected Nine-Phase Flux Switching Permanent Magnet Motor Drive System

Hybrid Space Vector Modulation Strategy for Torque Ripple Minimization in Three-Phase Four-Switch Inverter-Fed PMSM Drives

Optimized Fault-Tolerant Control of Dual Three-Phase PMSM Under Open-Switch Faults

Torque Ripple Elimination Based on Inverter Voltage Drop Compensation for a Three-Phase Four-Switch Inverter-Fed PMSM Drive under Low Speeds

A Novel Square-Wave Voltage Injection Based Sensorless Control Method Robust to Single Open-Phase Fault for Dual Three-Phase IPM

Sensorless Control Method for Dual Permanent Magnet Synchronous Motors Driven by Five-Leg Voltage Source Inverter with Single Current Sensor

Three-Phase Four-Switch Inverter Fed IPMSM Initial Position Estimation Based on HF Method

An Embedded Fault-Tolerant Control Method for Single Open-Switch Faults in Standard PMSM Drives

Comprehensive Analysis and Reduction of Torque Ripples in Three-Phase Four-Switch Inverter-Fed PMSM Drives Using Space Vector Pulse-Width Modulation

Predictive DTC Strategy With Fault-Tolerant Function for Six-Phase and Three-Phase PMSM Series-Connected Drive System

Four-Switch Inverter Fed PMSM DTC with SVM approach for Fault Tolerant operation