Abstract:Hydrotreating (HDT) is one of the most important p etroleum refining processes. The process consists of removing impurities such as sulfur, nit rogen and metals and reducing the aromatic content from petroleum fractions under a hydrogen pressure in the presence of a solid catalyst [1]. The HDT process can be used to enhance the quality of refin ed products so as to reach environmental constraint s and commercial specifications as for kerosenes and gas oils, but also to pretreat feedstocks to other processing units such as naphtha cuts and vacuum ga s oils. To accurately predict process performances, reliab l kinetic models are needed. Classic HDT kinetic models are based on a lumping strategy, in which molecular components are grouped into several chemical families, according to their globa properties (boiling point, solubility, etc.). Hen ce, the actual molecular information is hidden due to t he multicomponent nature of each lump. With environmental restrictions becoming more stringent, kinetic models have to be able to predict molecular properties of the products, a requirement tha can not be achieved by using a lumped modeling strategy. Hence, more detailed kinetic mod els that contain molecule-based reaction pathways need to be developed. However, developing moleculebased kinetic models for complex petroleum feedstocks is intricate, not only due to the large number of chemical species, reactions and associate d rate constants, but also due to difficulties arisin g in the characterization of these complex mixtures . The present work focuses on the development of a n vel two-step kinetic modeling strategy that retains the molecular detail throughout the method. In the proposed approach, the lack of molecular detail of the petroleum fractions is overcome by us ing a carefully selected synthetic mixture of representative molecules which has properties close t the available feedstock analyses. This mixture of molecules is generated in the first step of the methodology via a molecular reconstruction method. In the second step, a method called “kinetic Monte Car lo” (kMC) is utilized to simulate the reactions of this mixture of molecules. This method is based on a Markovian process, which transforms the molecule, event by event, by means of probability c onsiderations. In this way, the reaction network is generated “on-the-fly” thereby reducing the size of the reaction network to be managed along the simulations. The methodology has been applied to hydrotreating of two Light Cycle Oil (LCO) gas oils and the predicted effluents were favorably compared to the experimental yield pattern.

Application of a deactivation model for hydrotreating of heavy crude oil in bench-scale reactor

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Development and Application of Industrial Catalytic Cracking Process Online Calculation

Deactivation and Regeneration of Raney-Ni Catalyst During Multiphase Dehydrogenation of Cyclohexane

Kinetic Model for Hydroisomerization Reaction of C8-aromatics

Comparative Study on Hydrotreating of Venezuela De-Asphalted Oil: Conversion Behavior of Heteroatom Compounds and HDM Catalyst Deactivation

Experimental Determination on the Deactivation Kinetics of Residue Hydroprocessing in a Two-Stage Fixed Bed Loaded with HDM and HDS Catalysts

Integration of catalytic fast pyrolysis and hydroprocessing: a pathway to refinery intermediates and “drop-in” fuels from biomass

MODELING OF HYDROTREATING PROCESSES VIA MOLECULAR F EED RECONSTRUCTION AND MOLECULE-BASED MONTE CARLO KINET ICS

Performance analysis of crude terephthalic acid hydropurification in an industrial trickle-bed reactor experiencing catalyst deactivation

Recent progress in hydrotreating kinetics and modeling of heavy oil and residue: A review

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor

An inclusive experimental and kinetic understanding of the slurry phase hydroprocessing of crude oil with an active dispersed catalyst to obtain refined fuel

A Model of Catalytic Cracking: Catalyst Deactivation Induced by Feedstock and Process Variables

The Influence of Hydrodearomatisation Reaction Kinetics on the Modelling of Sulphur and Aromatics Removal from Diesel Fuel in an Industrial Hydrotreating Process

Scaleable Hydrotreating of HTL Biocrude to Produce Fuel Blendstocks

Kinetic Study of Hydrodesulfurization of Coker Gas Oil in a Slurry Reactor

Effect of hydrotreatment process on the physicochemical properties of a Colombian heavy crude oil post-catalytic aquathermolysis

Heavy oil atmospheric residue: HDS performance and life test using ARDS catalysts system

Modeling and Simulation of a Three Phase Fixed Bed Catalytic Reactor for the Hydrogenation of 2-ethyl-hexenal