T- and B-Cell-Deficient Mice with Experimental Stroke have Reduced Lesion Size and Inflammation

P. D. Hum,S. Subramanian,S. Parker,M. Afentoulis,Laurie J. Kaler,A. Vandenbark,H. Offner

DOI: https://doi.org/10.1038/sj.jcbfm.9600482

2007-11-01

Abstract:

What problem does this paper attempt to address?

Influence of the fiber index profile on vectorial fiber modes and application to tapered fiber devices

X. Daxhelet,L. Martineau,J. Bures

DOI: https://doi.org/10.1109/JLT.2005.843853

IF: 4.7

2005-05-16

Journal of Lightwave Technology

Abstract:The correspondence between the scalar modes LP and the nearly degenerate true vectorial modes in circular two-layer fibers is well established. For example, LP/sub 21/ corresponds to a combination of EH/sub 11/ and HE/sub 31/, while LP/sub 02/ is composed only of HE/sub 12/. For the multilayer fibers, inversion of the correspondences for certain modes can occur. We illustrate this inversion for a three-layer fiber. We propose a method permitting to distinguish the hybrid modes HE/sub /spl nu//spl mu// and EH/sub /spl nu//spl mu// in such fibers and we show the possibility of major taper-induced power coupling between these modes in SMF-28 fiber.
Nuclear data activities for medium mass and heavy nuclei at Los Alamos

M. R. Mumpower,T. M. Sprouse,T. Kawano,M. W. Herman,A. E. Lovell,G. W. Misch,D. Neudecker,H. Sasaki,I. Stetcu,P. Talou

DOI: https://doi.org/10.1051/epjconf/202328412001

2023-01-01

EPJ Web of Conferences

Abstract:Nuclear data is critical for many modern applications from stockpile stewardship to cutting edge scientific research. Central to these pursuits is a robust pipeline for nuclear modeling as well as data assimilation and dissemination. We summarize a small portion of the ongoing nuclear data efforts at Los Alamos for medium mass to heavy nuclei. We begin with an overview of the NEXUS framework and show how one of its modules can be used for model parameter optimization using Bayesian techniques. The mathematical framework affords the combination of different measured data in determining model parameters and their associated correlations. It also has the advantage of being able to quantify outliers in data. We exemplify the power of this procedure by highlighting the recently evaluated 239 Pu cross section. We further showcase the success of our tools and pipeline by covering the insight gained from incorporating the latest nuclear modeling and data in astrophysical simulations as part of the Fission In R-process Elements (FIRE) collaboration. We advocate for the adoption of tranmission protocols such as the Unified Reaction Structures for Astrophysics (URSA) for the rapid inclusion of nuclear data into astrophysical simulations.

English Else
Nuclear data for light charged particle induced production of emerging medical radionuclides

Gaia Pupillo,Liliana Mou,Simone Manenti,Flavia Groppi,Juan Esposito,Ferid Haddad

DOI: https://doi.org/10.1515/ract-2022-0011

2022-05-17

Radiochimica Acta

Abstract:Whatever the radionuclide to be used in nuclear medicine, it is essential to know the expected yield during the production process, but also of all the possible radionuclidic impurities coproduced, that can have an impact on the product final quality, as well as in the related waste management. The availability of the majority of emerging radioisotopes, including the theranostic ones or pairs, is mainly limited by the fact that, for most of them, the optimal production route still needs to be strengthened if not defined in some cases. The aim of this work is to present a review on the charged particle induced nuclear cross sections to produce some emerging radionuclides for medical applications to show that all types of projectiles should be considered in the quest of producing medical radionuclides. An accurate analysis of the production routes is presented for some radionuclides ( 67 Cu, 47 Sc, 89 Zr, 103 Pd, 186g Re, 97 Ru, 211 At) chosen as examples to highlight (i) how the quality of the final product strongly depends on the chosen target/projectile/energy parameters set, (ii) how deuteron production routes may sometimes be more effective than the proton ones or lead to a different impurity profile and (iii) how α-particle beams may allow to bypass the limitations occurring when using Z = 1 beams. An overview of possible advantages and drawbacks of the cited production routes and of potential cross sections that still need to be measured, is also reported.

chemistry, inorganic & nuclear,nuclear science & technology
Nuclear Data Resources for Capture gamma-Ray Spectroscopy and Related Topics

B. Pritychenko

DOI: https://doi.org/10.48550/arXiv.1108.4691

2011-08-23

Solar and Stellar Astrophysics

Abstract:Nuclear reaction data play an important role in nuclear reactor, medical, and fundamental science and national security applications. The wealth of information is stored in internally adopted ENDF-6 and EXFOR formats. We present a complete calculation of resonance integrals, Westcott factors, thermal and Maxwellian-averaged cross sections for Z=1-100 using evaluated nuclear reaction data. The addition of newly-evaluated neutron reaction libraries, and improvements in data processing techniques allows us to calculate nuclear industry and astrophysics parameters, and provide additional insights on all currently available neutron-induced reaction data. Nuclear reaction calculations will be discussed and an overview of the latest reaction data developments will be given.
Nuclear data evaluation for decay heat analysis of spent nuclear fuel over 1–100 k year timescale

Hannah R. Doran,Alan J. Cresswell,David C. W. Sanderson,Gioia Falcone

DOI: https://doi.org/10.1140/epjp/s13360-022-02865-7

2022-06-07

Abstract:Accurate nuclear data are essential in the evaluation of decay heat from spent nuclear fuel (SNF). The accuracy of such data was assessed using an approach that compares values reported in different evaluated libraries and determines whether discrepancies reflect inaccuracies in primary data. A short list of 43 isotopes which are most significant to SNF decay heat calculations over 1–100 k years was produced by combining generic reactor inventory code with decay heat analysis for undifferentiated SNF. Decay properties (half-lives and decay energies) and neutron interactions (cross section and fission yields) were compared from 6 evaluated libraries. Fission product (FP) discrepancies identified are 90Sr half-life, where inclusion of a single measurement significantly reduces the evaluated value; 95mNb beta energy, where DDEP evaluation omits the decay to the 95Mo ground state; 99Tc beta energy, where evaluations differ by approximately 10% with a variety of shape factors used; 126Sb/126mSb beta (JEF2.2/3.1.1/3.3) and electron energies (JEFF3.1.1), where intensity differences are reported; and 137Cs beta energy, where ENDF/B-VIII.0 and JEF3.3 evaluations use incorrect shape factors. For actinides, the major discrepancies identified were 237Np alpha energy (JEF2.2/3.1.1) and 225Ac electron energies (ENDF/B-VIII.0) but overall show less discrepancies during long-term disposal (0.1–100 ky) compared to FP's during interim storage (1–100 years). Further assessments of the 90Sr half-life and the best shape factor for the 99Tc beta decay are needed to improve future decay heat analyses, which are important for designing future stores and evaluating schemes for possible heat recovery.

physics, multidisciplinary
Upgrade of IAEA recommended data of selected nuclear reactions for production of PET and SPECT isotopes

A. Hermanne,F. T. Tárkányi,A. V. Ignatyuk,S. Takács,R. Capote

DOI: https://doi.org/10.48550/arXiv.2006.03125

2020-06-05

Abstract:An IAEA research project was dedicated to the compilation, evaluation and recommendation of cross-section data for the accelerator production of $^{11}$C, $^{13}$N, $^{15}$O, $^{18}$F, $^{64}$Cu, and $^{124}$I positron-emitting radionuclides clinically used for PET imaging, and for the accelerator production of two gamma emitters, $^{81}$Rb and $^{123}$I, used in SPECT imaging. Cross sections for 19 charged-particle induced reactions that can be employed for radionuclide accelerator production were evaluated including uncertainties. The resulting reference cross-section data were obtained from Padé fits to selected and corrected experimental data, and integral thick target yields were subsequently deduced. Uncertainties in the fitted results were estimated via a Padé least-squares method with the addition of a 4\% assessed systematic uncertainty to the estimated experimental uncertainty. Experimental data were also compared with theoretical predictions available from the TENDL library. All of the numerical reference cross-section data with their corresponding uncertainties and deduced integral thick target yields are available on-line at the IAEA-NDS medical portal <a class="link-external link-https" href="https://www-nds.iaea.org/medportal/" rel="external noopener nofollow">this https URL</a> and also at the IAEA-NDS web page <a class="link-external link-https" href="https://www-nds.iaea.org/medical/" rel="external noopener nofollow">this https URL</a>.

Nuclear Experiment,Nuclear Theory
Neutronics Calculations to Support the Fusion Evaluated Nuclear Data Library (FENDL)

Tim D. Bohm,Mohamed E. Sawan

DOI: https://doi.org/10.1080/15361055.2021.1908783

2021-08-18

Abstract:In the design of fusion reactors, determining radiation levels due to neutrons and photons (gammas) throughout the reactor and its surroundings is important. Radiation transport codes need to have accurate cross-section libraries in order to produce accurate results. The Fusion Evaluated Nuclear Data Library (FENDL) is an international effort coordinated by the International Atomic Energy Agency, Nuclear Data Section, that assembles a collection of the best nuclear data for fusion applications. In the current FENDL-3.1d data library, neutron cross sections for 65 of the 180 isotopes present in the library come from ENDF/B-VII.1.Monte Carlo–based neutronics calculations using cross-section libraries from FENDL (versions 2.1 and 3.1d), ENDF/B (versions VII.1 and VIII.0), and candidate new evaluations for key structural elements/isotopes such as iron and chromium were performed. The calculations were performed in reactor-relevant models including a one-dimensional (1-D) cylindrical model of ITER, a three-dimensional (3-D) computer-aided design (CAD)–based model of ITER, and a 3-D CAD-based model of the U.S. Fusion Energy System Studies Fusion Nuclear Science Facility (FNSF).The results show that neutron fluxes calculated with different cross-section libraries can be as much as 12% higher and as much as 8% lower than those calculated with the reference cross-section library (FENDL-2.1). Nuclear heating calculated with different cross-section libraries can be as much as 14% higher and as much as 8% lower than those calculated with the reference cross-section library. Iron displacements per atom calculated with different cross-section libraries can be as much as 9% higher and as much as 9% lower than those calculated with the reference cross-section library. Helium production calculated with different cross-section libraries can be as much as 19% higher and as much as 2% lower than those calculated with the reference cross-section library. Tritium production in the ITER 1-D model's nonbreeding regions calculated with different cross-section libraries can be as much as 246% higher and as much as 5% lower than those calculated with the reference cross-section library. The tritium breeding ratio in the FNSF 3-D model calculated with different cross-section libraries averaged 1% higher at the inboard and 1.4% higher at the outboard than those calculated with the reference cross-section library.

nuclear science & technology
Neutron cross section measurements for BUC approaches

Stefan Kopecky,Andreea Oprea,Carlos Paradela,Peter Schillebeeckx

DOI: https://doi.org/10.1051/epjconf/202328408007

2023-01-01

EPJ Web of Conferences

Abstract:Criticality safety analysis is required at various stages of the back-end of the fuel cycle, i.e. reprocessing, transport, storage and disposal of spent nuclear fuel (SNF). To account for the reduction in reactivity due to fuel burnup, the Burn-Up Credit (BUC) concept was introduced. Evidently, this concept depends on the quality of nuclear data, in particular the absorption cross sections of some key nuclides. A dedicated programme has been established at the GELINA facility of the JRC-Geel to produce accurate cross section data and validate the evaluated nuclear data libraries for neutron interactions with fission fragments that are relevant for a BUC approach. In this work, cross section data for 103 Rh and 155 Gd are presented and the results are compared with the main evaluation libraries, showing good agreement in the thermal energy region with ENDF/B-VIII.0 and JEFF-3.3, but not with JENDL-4.0 for 103 Rh.
Statistical analysis of proton induced reactions to generate recommended data for the production of medical radio-isotopes

Sourav Mondal,A. Gandhi,Rebecca Pachuau

DOI: https://doi.org/10.48550/arXiv.2207.09306

2022-07-19

Abstract:Radio-isotopes produced via proton induced reaction holds special significance regarding nuclear medicine, astrophysical p-process, theragnostic and diagnostic processes. $^{76}$Br, $^{80m}$Br and $^{61}$Cu are positron emitter and they are useful in the functional studies via Positron Emission Tomography (PET), whereas $^{77}$Br bears the potential for the application in Single Photon Emission Computed Tomography (SPECT) which involves electron capture process. PET and SPECT have been in high application in medical physics, diagnostics, therapy and nuclear medicine. $^{99m}$Tc and $^{64}$Cu are two popular radionuclide which play important role in nuclear medicine, currently being used in bio-medical physics, bone scan, modern imaging, blood pool leveling, oncology and diagnosis of copper related diseases. This paper focus on the generation of recommended nuclear reaction cross sections for the production of some useful medical radio-isotopes using the experimental datasets obtained from EXFOR database and simulated datasets from nuclear reaction model codes TALYS-1.95 and EMPIRE-3.1.1. 95\% confidence interval has been implemented to ensure confidence and precision.

Nuclear Theory,Medical Physics
Total nuclear reaction cross-section database for radiation protection in space and heavy-ion therapy applications

F Luoni,F Horst,CA Reidel,A Quarz,L Bagnale,L Sihver,U Weber,RB Norman,W de Wet,M Giraudo,G Santin,J Norbury,M Durante

DOI: https://doi.org/10.1088/1367-2630/ac27e1

2021-09-07

Abstract:Realistic nuclear reaction cross-section models are an essential ingredient of reliable heavy-ion transport codes. Such codes are used for risk evaluation of manned space exploration missions as well as for ion-beam therapy dose calculations and treatment planning. Therefore, in this study, a collection of total nuclear reaction cross-section data has been generated within a GSI-ESA-NASA collaboration. The database includes the experimentally measured total nucleus-nucleus reaction cross-sections. The Tripathi, Kox, Shen, Kox-Shen, and Hybrid-Kurotama models are systematically compared with the collected data. Details about the implementation of the models are given. Literature gaps are pointed out and considerations are made about which models fit best the existing data for the most relevant systems to radiation protection in space and heavy-ion therapy.

Nuclear Theory,Nuclear Experiment
Nuclear data development at the European Spallation Source

Jose Ignacio Marquez Damian,Douglas D. DiJulio,Günter Muhrer

DOI: https://doi.org/10.3233/jnr-210014

2021-09-27

Journal of Neutron Research

Abstract:Transport calculations for neutronic design require accurate nuclear data and validated computational tools. In the Spallation Physics Group, at the European Spallation Source, we perform shielding and neutron beam calculations to help the deployment of the instrument suite for the current high brilliance (top) moderator, as well for the design of the high intensity bottom moderator, currently under study for the facility. This work includes providing the best available nuclear data in addition to improving models and tools when necessary. In this paper we present the status of these activities, which include a set of thermal scattering kernels for moderator, reflector, and structural materials, the development of new kernels for beryllium considering crystallite size effects, nanodiamonds, liquid hydrogen and deuterium based on path integral molecular dynamics, and the use of the software package NCrystal to assist the development of nuclear data in the framework of the new HighNESS project.
Note on the potential to increase the accuracy of source term calculations for spent nuclear fuel

Marcus Seidl,Peter Schillebeeckx,Dimitri Rochman

DOI: https://doi.org/10.3389/fenrg.2023.1143312

IF: 3.4

2023-04-06

Frontiers in Energy Research

Abstract:The accuracy of source term predictions is an important factor which determines the efficiency of interim and final storage of spent nuclear fuel. To minimize the required number of storage containers and to minimize the volume and mass of facilities while maintaining safety margins requires accurate codes to predict the decay heat and the gamma and neutron sources with minimum bias for time points ranging from months to thousands of years. While the relevant nuclear data for the purpose of criticality safety received high attention in the last decades and have been extensively verified with dedicated tests, nuclear data relevant for spent nuclear fuel had smaller priority. Mostly results from a radiochemical analysis of samples taken from commercially irradiated fuel have been used for validation purposes. The comparatively sparse data available from tests which exclusively focus on nuclide vector validation under research conditions means that many factors enter the uncertainty estimate of the measurement-theory comparisons and limits the ability to validate codes to a high accuracy. Firstly, the current status of validation efforts is reviewed. Secondly, fields of improvement are explored. Thirdly, the character of uncertainty distributions in measurement-theory comparisons (C/E) of nuclide vectors is analyzed. Currently there are indications that the C/E data is thick tailed which limits improvement of code validation efforts.

energy & fuels
Feasibility Study to Byproduce Medical Radioisotopes in a Fusion Reactor

Jia Li,Shanliang Zheng

DOI: https://doi.org/10.3390/molecules28052040

IF: 4.6

2023-02-22

Molecules

Abstract:Currently, international nuclear fission reactors producing medical isotopes face the problem of shutdown and maintenance, decommissioning, or dismantling, while the production capacity of domestic research reactors for medical radioisotopes is inadequate, and the supply capacity for medical radioisotopes faces major challenges in the future. Fusion reactors are characterized by high neutron energy, high flux density, and the absence of highly radioactive fission fragments. Additionally, compared to fission reactors, the reactivity of the fusion reactor core is not significantly affected by the target material. By building a preliminary model of the China Fusion Engineering Test Reactor (CFETR), a Monte Carlo simulation was performed for particle transport between different target materials at a fusion power of 2 GW. The yields (specific activity) of six medical radioisotopes (14C, 89Sr, 32P, 64Cu, 67Cu, and 99Mo) with various irradiation positions, different target materials, and different irradiation times were studied, and compared with those of other high-flux engineering test reactors (HFETR) and the China Experimental Fast Reactor (CEFR). The results show that this approach not only provides competitive medical isotope yield, but also contributes to the performance of the fusion reactor itself, e.g., tritium self-sustainability and shielding performance.
Updated and Revised Neutron Reaction Data for 236,238Np

Guochang Chen,Jimin Wang,Wentian Cao,Guoyou Tang,Baosheng Yu

DOI: https://doi.org/10.1051/epjconf/201714602051

2017-01-01

EPJ Web of Conferences

Abstract:Nuclear data with high accuracy for minor actinides play an important role in nuclear technology applications, including reactor design and operation, fuel cycle, estimation of the amount of minor actinides in high burn-up reactors and the minor actinides transmutation. Based on a new set of neutron optical model parameter and the reaction cross section systematics of fissile isotopes, a full set of 236,238Np neutron reaction data from 10−5 eV ∼20 MeV are updated and improved through theoretical calculation. Mainly revised quantities include the total, elastic, inelastic, fission, (n, 2n) and (n, γ) reaction cross sections as well as angular distribution etc. The promising results are obtained when the renewal evaluated data of 236,238Np will replace the evaluated data in CENDL-3.1 database.
SU-FF-T-296: Modeling to Characterize Neutron Activation Products in a Medical Linear Accelerator

B Bednarz,V Taranenko,X Xu

DOI: https://doi.org/10.1118/1.2760958

IF: 4.506

2007-01-01

Medical Physics

Abstract:Purpose: Estimate production of prompt and delayed activation products for 18 MV source in Varian Clinac 2100C. The work supports AAPM task group TG‐136 on assessing hazards to therapy staff due to activation. Method and Materials: A detailed model of the Varian Clinac 2100C was developed in MCNPX. An 18 MV photonbeam was produced by impinging double Gaussian‐shaped electron parallel beam on a tungsten target with average energy of 18.3 MeV. The relative neutron yields from photonuclear interactions in the major components were calculated. In addition, several neutron fluence tallies were generated around the accelerator head. Another calculation was done in order to map the neutron fluence throughout the entire accelerator geometry. Two activation libraries ACTL and JEFF were considered in the simulations. Results: The majority of the neutrons were produced in the primary collimator and jaws as a result of these components high‐z composition (W). Also, more than 98% of the neutrons were produced in primary components. The neutron fluence tallies calculated at various locations around the accelerator are consistent with previous studies. Conclusion: The neutron yield in primary accelerator components and neutron fluence map across the entire accelerator geometry were calculated. The origins of photonuclear products inside the accelerator allow the determine activation rates to be determined. Once the activation rates are determined, subsequent calculations can be performed using detailed anatomical human models to assess the unwanted activation dose to therapy staff, physics staff, engineering staff, patients, and patient's family members.
Evaluation of Nuclear Activation of Tungsten Plates for Future Modeling of a Medical Accelerator

Bin Han,Bryan Bednarz,Yaron Danon,Robert Block,X. George Xu

DOI: https://doi.org/10.13182/nt09-a9246

IF: 1.667

2009-01-01

Nuclear Technology

Abstract:High-energy photons from medical accelerators are used to treat tumors in cancer patients. One consequence is the production of neutrons from photonuclear interactions in the high-Z accelerator components. The release and capture of neutrons produce radioactive nuclei that can irradiate patients and medical personnel. The goal of this study is to develop a method for quantifying the activation of accelerator components using MCNPX. To benchmark this method, we took activation measurements from the irradiation of a series of zinc plates using a 55-MeV electron beam and compared them with MCNPX calculations. The measured cumulative photon-induced activity from Zn-68(gamma, p)Cu-67 interactions in all of the plates was 10.8 MBq, which is in 5.4% agreement with the calculated value of 10.2 +/- 1.1 MBq. Based on these results, a series of simulations were performed in order to optimize the photon- and neutron-induced activity in tungsten for subsequent experiments. The radioactivity from activated short-lived isotopes and subsequent buildup can be significant from repeated accelerator operations during a day. The approach described in this paper is useful in quantifying the origin and the amount of nuclear activation and the buildup of radioactivity.
Modeling To Characterize Neutron Activation Products In A Medical Linear Accelerator

B Bednarz,V Taranenko,X Xu

DOI: https://doi.org/10.1118/1.2760958

IF: 4.506

2007-01-01

Medical Physics

Abstract:Purpose: Estimate production of prompt and delayed activation products for 18 MV source in Varian Clinac 2100C. The work supports AAPM task group TG-136 on assessing hazards to therapy staff due to activation. Method and Materials: A detailed model of the Varian Clinac 2100C was developed in MCNPX. An 18 MV photon beam was produced by impinging double Gaussian-shaped electron parallel beam on a tungsten target with average energy of 18.3 MeV. The relative neutron yields from photonuclear interactions in the major components were calculated. In addition, several neutron fluence tallies were generated around the accelerator head. Another calculation was done in order to map the neutron fluence throughout the entire accelerator geometry. Two activation libraries ACTL and JEFF were considered in the simulations. Results: The majority of the neutrons were produced in the primary collimator and jaws as a result of these components high-z composition (W). Also, more than 98% of the neutrons were produced in primary components. The neutron fluence tallies calculated at various locations around the accelerator are consistent with previous studies. Conclusion: The neutron yield in primary accelerator components and neutron fluence map across the entire accelerator geometry were calculated. The origins of photonuclear products inside the accelerator allow the determine activation rates to be determined. Once the activation rates are determined, subsequent calculations can be performed using detailed anatomical human models to assess the unwanted activation dose to therapy staff, physics staff, engineering staff, patients, and patient's family members.
JENDL/DEU-2020: deuteron nuclear data library for design studies of accelerator-based neutron sources

Shinsuke Nakayama,Osamu Iwamoto,Yukinobu Watanabe,Kazuyuki Ogata

DOI: https://doi.org/10.1080/00223131.2020.1870010

IF: 1.126

2021-02-10

Journal of Nuclear Science and Technology

Abstract:Intensive fast neutron sources using deuteron accelerators have been proposed for various applications. To contribute to the design study of such neutron sources, a deuteron nuclear data library for 6,7Li, 9Be, and 12,13C up to 200 MeV, JENDL/DEU-2020 is developed. Evaluation of JENDL/DEU-2020 is performed by employing the code system DEURACS with particular attention to neutron production data. Toward the evaluation of JENDL/DEU-2020, some modifications are made to DEURACS. Validation of the library is performed through simulation with the Monte Carlo transport calculation codes. From the simulation, it is shown that calculation results based on JENDL/DEU-2020 reproduce measured neutron production data well in incident energies up to 200 MeV. The new library is expected to make a large contribution to diverse design studies of deuteron accelerator neutron sources.

nuclear science & technology
Extension of recommended cross section database for production of therapeutic isotopes

Ditrói, F.

DOI: https://doi.org/10.1007/s10967-023-09283-8

2024-01-10

Journal of Radioanalytical and Nuclear Chemistry

Abstract:Radionuclide-based diagnostics and therapy require proper selection of production nuclear reaction based on knowledge of the production excitation functions and the achievable yields completed with data on the formation of possible impurities. In the present work the existing IAEA recommended cross section data database for production of therapeutic isotopes is extended to production of the 47 Sc, 47 Ca( 47 Sc), 58m Co, 71 As( 71 Ge), 71 Ge, 77 Br, 77 Kr( 77 Br), 80m Br, 103 Pd, 103 Pd( 103m Rh), 103 Ru( 103m Rh), 105 Rh, 117m Sn, 119 Sb, 119m Te( 119 Sb), 134 Ce, 135 La, 149g Tb, 161 Tb, 165 Er, 165 Tm( 165 Er), 167 Tm, 197m Hg, 197g Hg, 198g Au, and 230 Pa( 230 U) radioisotopes. Nearly 60 nuclear reactions are presented and discussed. The new recommended cross-section data and their uncertainties for the production of these 21 radionuclides will be available on the Web page of the IAEA Nuclear Data Section at https://nds.iaea.org/radionuclides and also at the IAEA medical portal https://nds.iaea.org/medportal.

chemistry, inorganic & nuclear, analytical,nuclear science & technology
Nuclear reaction measurements on tissue-equivalent materials and GEANT4 Monte Carlo simulations for hadrontherapy

M De Napoli,F Romano,D D’Urso,T Licciardello,C Agodi,G Candiano,F Cappuzzello,G A P Cirrone,G Cuttone,A Musumarra,L Pandola,V Scuderi

DOI: https://doi.org/10.1088/0031-9155/59/24/7643

IF: 3.5

2014-11-21

Physics in Medicine and Biology

Abstract:When a carbon beam interacts with human tissues, many secondary fragments are produced into the tumor region and the surrounding healthy tissues. Therefore, in hadrontherapy precise dose calculations require Monte Carlo tools equipped with complex nuclear reaction models. To get realistic predictions, however, simulation codes must be validated against experimental results; the wider the dataset is, the more the models are finely tuned.Since no fragmentation data for tissue-equivalent materials at Fermi energies are available in literature, we measured secondary fragments produced by the interaction of a 55.6 MeV u(-1) (12)C beam with thick muscle and cortical bone targets. Three reaction models used by the Geant4 Monte Carlo code, the Binary Light Ions Cascade, the Quantum Molecular Dynamic and the Liege Intranuclear Cascade, have been benchmarked against the collected data. In this work we present the experimental results and we discuss the predictive power of the above mentioned models.

engineering, biomedical,radiology, nuclear medicine & medical imaging

T- and B-Cell-Deficient Mice with Experimental Stroke have Reduced Lesion Size and Inflammation

Influence of the fiber index profile on vectorial fiber modes and application to tapered fiber devices

Nuclear data activities for medium mass and heavy nuclei at Los Alamos

Nuclear data for light charged particle induced production of emerging medical radionuclides

Nuclear Data Resources for Capture gamma-Ray Spectroscopy and Related Topics

Nuclear data evaluation for decay heat analysis of spent nuclear fuel over 1–100 k year timescale

Upgrade of IAEA recommended data of selected nuclear reactions for production of PET and SPECT isotopes

Neutronics Calculations to Support the Fusion Evaluated Nuclear Data Library (FENDL)

Neutron cross section measurements for BUC approaches

Statistical analysis of proton induced reactions to generate recommended data for the production of medical radio-isotopes

Total nuclear reaction cross-section database for radiation protection in space and heavy-ion therapy applications

Nuclear data development at the European Spallation Source

Note on the potential to increase the accuracy of source term calculations for spent nuclear fuel

Feasibility Study to Byproduce Medical Radioisotopes in a Fusion Reactor

Updated and Revised Neutron Reaction Data for 236,238Np

SU-FF-T-296: Modeling to Characterize Neutron Activation Products in a Medical Linear Accelerator

Evaluation of Nuclear Activation of Tungsten Plates for Future Modeling of a Medical Accelerator

Modeling To Characterize Neutron Activation Products In A Medical Linear Accelerator

JENDL/DEU-2020: deuteron nuclear data library for design studies of accelerator-based neutron sources

Extension of recommended cross section database for production of therapeutic isotopes

Nuclear reaction measurements on tissue-equivalent materials and GEANT4 Monte Carlo simulations for hadrontherapy