A Simple High Power, Fast Response Streaming Potential/Current-Based Electric Nanogenerator Using a Layer of Al 2 O 3 Nanoparticles
Xiaoye Zhao,Jiayun Feng,Ming Xiao,Daozhi Shen,Caiwang Tan,Xiaoguo Song,Jicai Feng,Walter W. Duley,Y. Norman Zhou,Xiaoye Zhao,Jiayun Feng,Ming Xiao,Daozhi Shen,Caiwang Tan,Xiaoguo Song,Jicai Feng,Walter W. Duley,Y. Norman Zhou
DOI: https://doi.org/10.1021/acsami.1c04290
2021-06-03
Abstract:Harvesting energy from ambient moisture and natural water sources is currently of great interest due to the need for standalone self-powered nano/micro-systems. In this work, we report on the development of a cost-effective nanogenerator based on a carbon paper-Al<sub>2</sub>O<sub>3</sub> nanoparticle layer-carbon paper (CAC) sandwich structure, where the 3D Al<sub>2</sub>O<sub>3</sub> layer is deposited via vacuum filtration. This type of device can produce an open-circuit voltage (<i>U</i><sub>OC</sub>) of up to 4 V and a short-circuit current (<i>I</i><sub>SC</sub>) of ∼18 μA with only an 8 μL water droplet applied. To our knowledge, this is the highest voltage yet reported from a single moisture/water-induced electricity nanogenerator using solid oxides and carbon-based materials. A remarkable output power of 14.8 μW can be reached with an optimized resistive load. An LED with a working voltage of 3–3.2 V can operate for a short time with the power from a single CAC device exposed to one 8 μL water droplet. Furthermore, a CAC generator adsorbing as little as 2 μL water droplets every 3 min can also give a <i>U</i><sub>OC</sub> of 3.63 V. We show that CAC devices provide a robust electrical output over more than 200 wet–dry cycles without any deterioration in performance. These units demonstrate much promise as cost-effective electricity generators for harvesting energy from natural sources like rainwater, tap water, snow runoff, and dew. The response time of CAC devices can be as fast as 10–100 ms, making them ideal for applications as self-powered water detectors. The generation of power in this device arises from the streaming current. To assist in the optimization of these devices, we have analyzed how their response is related to such factors as layer thickness, time interval between application of water droplets, and the volume of each water droplet.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04290?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04290</a>.Photo of the as-fabricated CAC device; relationship between the average layer thickness and weight of Al<sub>2</sub>O<sub>3</sub> NPs; characterizations of Al<sub>2</sub>O<sub>3</sub> NPs and the carbon electrode; <i>U</i><sub>OC</sub> and <i>I</i><sub>SC</sub> responses of devices with different Al<sub>2</sub>O<sub>3</sub> layer thicknesses, time intervals between water droplets, and different water volumes of each water droplet; time dependence of the voltage response of the CAC nanogenerators with different thicknesses obtained using a fast oscilloscope; time dependence of the output voltage when powering an LED; <i>U</i><sub>OC</sub> response when the Al<sub>2</sub>O<sub>3</sub> layer was replaced with a filter paper and print paper and when deionized water was replaced by ethanol, acetone, or isopropanol; schematic of the overlapping EDL between two adjacent Al<sub>2</sub>O<sub>3</sub> NPs; schematic of the water diffusion in an Al<sub>2</sub>O<sub>3</sub> layer at various layer thicknesses and water volumes and the corresponding verification from a 1.27 mm-thick CAC generator; and schematic of the mechanism for water diffusion in an Al<sub>2</sub>O<sub>3</sub> layer for different time intervals between applied water droplets (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04290/suppl_file/am1c04290_si_001.pdf">PDF</a>)Illustration of powering a commercial LED light with one single device when an 8 μL water droplet is applied (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04290/suppl_file/am1c04290_si_002.mov">MOV</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology