Abstract:Astronomical observation requires more distant and fainter object with a better resolution, so that the larger primary mirror telescope is needed to ensure the better resolution and light energy collection. However, the diameter of monolithic primary mirror is limited due to the manufacturing and logistics limitations. The segmented primary mirror is taken as an alternative solution to break the limitation. The segmented primary mirror must be co-phased to accomplish a diffraction-limited imaging. In this paper, we put forward a new method to measure the tip/tilt errors between the segments in whole aperture simultaneously based on analyzing the intensity distribution and Fourier optics principle. We set a mask with sparse multi-sub-pupils configuration on the segments' conjugate plane. A point source is taken as the object of the segmented telescope, the pattern focused on the CCD is recorded as the point spread function (PSF). Then, the Fourier transform is performed for the PSF and we can obtain the optical transfer function (OTF) which is composed of the modulation and phase transfer functions (MTF and PTF). Tip/tilt errors can be extracted from the PTF side-lobes. Simulation and preliminary experiments have been done to validate the feasibility of the method. The accuracy of the method is 6.344 x 10(-6) lambda(lambda=632.8nm) RMS when the tip/tilt error is less than 0.4 lambda, and when the tip/tilt error is in the range of [0.4 lambda,2.4 lambda], the accuracy is 8.55x10(-15) lambda RMS. We also analyze the disturbance factor of the method in the simulation, including the piston error, the noise of the signal processing system, the surface shape error of the segments, etc. Furthermore, a preliminary experiment is built up to verify the 3 segmented system. This method has a higher detection efficiency and a lower hardware requirement which only needs a mask with sparse sub-aperture configuration.

New methods for masked-aperture and speckle interferometry

HIGH-PRECISION ASTROMETRY WITH A DIFFRACTIVE PUPIL TELESCOPE

Characterizing aperture masking interferometry in the near-infrared as an effective technique for astronomical imaging

Michelson Interferometry with the Keck I Telescope

The unlikely rise of masking interferometry: leading the way with 19th century technology

Speckle Imaging Through a Coherent Fiber Bundle

High dynamic range imaging by pupil single-mode filtering and remapping

Speckle noise reduction techniques for high-dynamic range imaging

Sparse Aperture Masking Technique on Measurement of Star Diameter

A Demonstration of Wavefront Sensing and Mirror Phasing from the Image Domain

Multiplexed wavefront sensing with a thin diffuser

High-contrast Imaging from Space: Speckle Nulling in a Low Aberration Regime

High spatial resolution and high contrast optical speckle imaging with FASTCAM at the ORM

MTF Non-Redundant Distribution for Multi-Piston Errors Detection of Segmented Telescopes

Adaptive aperture defocused digital speckle photography

Multi-tip/tilt errors simultaneous detection for segmented telescopes based on coherent diffraction

First light of a holographic aperture mask: Observation at the Keck OSIRIS Imager

Lensless imaging via multi-height mask modulation and ptychographical phase retrieval

High-contrast, High-angular-resolution Optical Speckle Imaging: Uncovering Hidden Stellar Companions

Spectral interferometric wavefront sensing: a solution for petalometry at Subaru/SCExAO

High resolution imaging by employing passive and active approaches