Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

All-fiber laser self-mixing interferometry for signal enhancement with phase-shifted fiber Bragg grating

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Simultaneously Realizing PM-IM Conversion and Efficiency Improvement of Fiber-Optic Links Using FBG

Simultaneous Realization of Optical Carrier-Suppression and SSB Modulation in Wireless Fiber Links Using Fiber Bragg Grating

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Single-Arm Frequency-Shifted Interferometry Using a Bidirectional Electro-Optic Modulator

Main Factors for Optimization of PM-FBG Inscribed by Femtosecond Laser Point-by-Point Technology

An apodized optimization methods for phase shift sampled fiber Bragg grating

Femtosecond laser line-by-line inscription of apodized fiber Bragg gratings

Parallel-Integrated Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Photothermal Effects in Phase Shifted FBG with Varied Light Wavelength and Intensity

Laser Self-Mixing Interference Fibre Sensor

Fiber self-mixing interferometer with orthogonally polarized light compensation.

293 W, GHz narrow-linewidth, polarization maintaining nanosecond fiber amplifier with SBS suppression employing simultaneous phase and intensity modulation

Dynamic range enhancement for the sensing signals of peak-saturated fiber Bragg grating spectra

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Four-wavelength-switchable SLM fiber laser with sub-kHz linewidth using superimposed high-birefringence FBG and dual-coupler ring based compound-cavity filter

Self-mixing Interferometry Based on Nanometer Fringes and Polarization Flipping