Abstract:Experimental techniques such as the cone calorimeter, representing realistic fire conditions, and the thermogravimetric analyser (TGA) combined with evolved gas analysis (EGA) can be used to determine flammability and degradation properties of materials. The desire is to correlate the flammability properties measured in the cone calorimeter for samples of size 100mm×100mm with those measured or deduced from TGA combined with EGA for milligram samples. Such an achievement will allow the design of fire-safe materials by quickly assessing (a) the fire safety of materials in their earliest milligram formulation and (b) the dependence of their flammability properties on the molecular structure of the material. In the present study, a cone calorimeter and TGA investigation is conducted for commercial Nordic Spruce wood impregnated by mono-ammonium phosphate (fire retardant, FR) through a vacuum pressure method. Experiments in the cone calorimeter with increasing FR concentrations indicated that (a) the char yields increased, (b) the apparent ignition temperature increased, (c) time to piloted ignition increased, (d) the total amount of heat released was reduced, (e) the peak heat release rate was reduced and (f) the carbon monoxide and smoke yields increased especially before ignition occurred. By comparison, char yields also increased with FR content in the TGA degradation experiments in nitrogen. The increase in the char yield with FR content explains quantitatively the decrease in the heat release in the cone calorimeter. By contrast, the onset temperatures measured in TGA decreased, whereas the ignition temperature deduced in the cone calorimeter increased with FR content. This difference is attributed to reduced yield of levoglucosan (reported in recent literature using TGA/EGA) with increased char yield as well as to the presence of phosphorous containing moieties in the volatiles, which both can quench piloted ignition. Finally, the TGA measurements showed that the FR concentrations decreased for milligram samples at different distances from the surface of the wood used in the cone calorimeter measurements. The variation of FR retardant with depth needs to be considered when using TGA data to interpret cone calorimeter measurements and the fire performance of the FR wood in approval tests such as the single burning item (SBI).

Experimental and Numerical Simulation Analyses of Flame Spread Behaviour over Wood Treated with Flame Retardant in Ancient Buildings of Fuling Mausoleum, China

Flame-retardancy and Smoke Suppression Characteristics of Bamboo Impregnated with Silicate-Intercalated Calcium Aluminum Hydrotalcates

Research on Fire Retardant Performance of Wood with the Compound of Potassium Carbonate and SiO2 Gels

Flammability and Flame Spread Behavior of Common Fuels in Chinese Historical Buildings: an Experimental Research

A Comparative Study of the Fire Properties of Chinese Traditional Timber Structural Components under Different Surface Treatments

Assessing the Fire Properties of Various Surface Treatments on Timber Components in Ancient Chinese Buildings: A Case Study from the Xianqing Temple in Changzhi, Shanxi, China

Study on Flame-retardation and Smoke-suppression Characteristics and Mechanism of NSCFR Flame Retardant or Wood

Influence of natural aging on wood combustion heat release

Highly Flame-Retardant and Low Heat/Smoke-Release Wood Materials: Fabrication and Properties

The Combustion and Mechanical Properties of Guanidine Phosphate-Boron Compound-Silica Sol Composite Flame Retardant on Wooden Structure Building Components

Progress in Research on Fire Retardant–Treated Wood and Wood-Based Composites: A Chinese Perspective

Evaluation of flammability for bamboo products treated with water-soluble flame retardants

Combustion Behavior and Thermal Degradation Properties of Wood Impregnated with Intumescent Biomass Flame Retardants: Phytic Acid, Hydrolyzed Collagen, and Glycerol

Full-scale Fire Experiment of Timber Buildings in Rural Areas of Southwest China

Full Scale Test on Fire Spread and Control of Wooden Buildings

The color change analysis of historic wooden remains after fire-suppression by fluorinated chemical gases

Preparation and Study on Nitrogen- and Phosphorus- Containing Fire Resistant Coatings for Wood by UV-Cured Methods

Analyzing Temperature Distribution Patterns on the Facing and Backside Surface: Investigating Combustion Performance of Flame-Retardant Particle Boards Using Aluminum Hypophosphite, Intumescent, and Magnesium Hydroxide Flame Retardants

Flammability assessment of fire-retarded Nordic Spruce wood using thermogravimetric analyses and cone calorimetry

Comparative study of the combustion and kinetic characteristics of fresh and naturally aged pine wood

An Experimental and Numerical Study on Fire Behaviors of Charring Materials Frequently Used in Buildings