Abstract:Hybrid composites are materials composed of a combination of two or more different types of reinforcements, often with distinct properties. The combination of different reinforcements aims to exploit the strengths of each material, resulting in a composite with improved mechanical, thermal, or other specific properties compared to individual components. Nowadays, application of hybrid composites reinforced with natural fibers has gained significance in various industries due to the unique combination of properties such as automobile, aerospace, construction, Sports and Leisure. Eventhough, natural fibers may degrade over time due to environmental factors, resulted in decrease in mechanical properties and overall durability of the hybrid composite. Therefore, Hybrid composites can achieve a combination of high strength, stiffness and toughness that is difficult to obtain with single-fiber composites. The aim of the study is to develop roselle fibers reinforced epoxy resin-based hybrid composite using hand layup method. The snail shell powder with different weight proportion (5, 10 & 15 wt.-%) and 20% (wt.-%) of roselle fiber have been added to fabricate the hybrid composite. The study was carried out in order to study the mechanical properties such as tensile, flexural, impact and hardness strength. The results showed that the composites fabricated with 10% of snail shells powder showed the maximum tensile strength of 40 MPa, flexural strength of 57 MPa and impact strength of 31 KJ/m2. The 15% filler added composite showed the maximum hardness strength of 43 HV. It was observed that the fracture mechanism of a hybrid composite involves fiber breakage, matrix cracking, delamination, matrix debonding, crack initiation and voids etc were formed in the composite. The Composite samples embedded with fillers demonstrate the lowest water intake behaviour. The findings showed that the hybrid composite with 10% snail shell powder exhibited the highest tensile, flexural and impact strength while the 15% snail shell powder composite showed the highest hardness (43 HV). Additionally, snail shell embedded composites demonstrated the lowest water intake behaviour. Fracture analysis revealed mechanisms such as fiber breakage and matrix cracking observed via SEM.

Studies on mechanical and water absorption behavior of biofiber-reinforced epoxy biocomposites added with seashell, eggshell, and coconut biofillers

Studies on water uptake behavior and mechanical performance of bio-wastage-reinforced bio composites for improved sustainability

Effect of banana, pineapple and coir fly ash filled with hybrid fiber epoxy based composites for mechanical and morphological study

Investigation on mechanical properties of the green synthesis bamboo fiber/eggshell/coconut shell powder-based hybrid biocomposites under NaOH conditions

Effect of kapok seed powder on mechanical and water intake properties of untreated kenaf fiber composites

Mechanical and Sound Absorption Behavior of Sisal and Palm Fiber Reinforced Hybrid Composites

Effect of calcium carbonate nanoparticles on mechanical properties of coir-kenaf based epoxy hybrid composites: An analytical and simulation study

Development of silane-treated corn husk fiber and agro-waste biofiller-reinforced epoxy composite: effects on wear, mechanical, thermal, and water absorption properties

Effect of snail shell powder addition on mechanical and microstructure behaviour of mercerized roselle fiber reinforced epoxy resin-based hybrid composite

Experimental investigation on mechanical and tribological analysis of pineapple leaf ( Ananas comosus ) and sisal ( Agave sisalana ) fibers reinforced hybrid epoxy composites

Investigation on Mechanical Properties of Bamboo and Coconut Fiber with Epoxy Hybrid Polymer Composite

Investigation on Mechanical Properties of Coir Fiber Reinforced Polymer Resin Composites Saturated with Different Filling Agents

Effect of silane treatment on corn husk and tamarind fiber and betel nut filler on fatigue, thermal conductivity, and machining behavior of epoxy biocomposites

Mechanical properties of seaweed/banana fiber/hBN filled epoxy composites using Box–Behnken method

Physical and Mechanical Characterization of Bamboo Fiber/Groundnut Shell/Copper Particle/MWCNT-Filled Epoxy Hybrid Polymer Nanocomposites

Exploring the impact of hybridization on green composites: pineapple leaf and sisal fiber reinforcement using poly(furfuryl alcohol) bioresin

Eggshell bio‐filler integration in jute/banana fiber‐reinforced epoxy hybrid composites: Fabrication and characterization

Studies on evaluation of mechanical, thermal, and chemical properties of aloe vera-, corn-, eucalyptus-, and soybean fiber-reinforced epoxy biocomposites

Effect of silane-treated lignin and hybrid bamboo-green pea sheath fiber on mechanical, wear, and wettability behavior of epoxy structural composite

Experimental Investigation on Volume Fraction of Mechanical and Physical Properties of Flax and Bamboo Fibers Reinforced Hybrid Epoxy Composites

Effect of bio nanofiller in influencing the carbon and E-glass fabric reinforced composites