Using Optimized Particle Imaging of Micro-Raman to Characterize Microplastics in Water Samples.
Minglu Ma,Jian Zhao,Dongyu Xu,Bo Gao
DOI: https://doi.org/10.1016/j.scitotenv.2023.165031
2023-01-01
Abstract:Characterizing the chemical properties, morphologies, size, and quantities of microplastics (MPs) in water samples with high precision is critically important for understanding the environmental behaviors of MPs. Traditional detec-tion methods, such as Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy point-by-point detec-tion, provide worthy reference techniques but are time-and labor-consuming. We established a super time-saving and high-precision technique to characterize MPs using micro-Raman automatic particle identification (MR-API). Based on the identification of PS spheres, screen magnification, exposure time, and the number of scans are selected as crucial detection parameters for MR-API analysis, which highly affect the precision of the results. Detecting particles down to 1 & mu;m requires magnification of the mosaic until the scale showed 200 & mu;m. The recommended setting param-eters were 83.33 or 100 ms exposure time, 20 scans, 7 mW laser power, and 1 & mu;m image pixel size, suitable for poly-styrene (PS), polypropylene (PP), polyethylene terephthalate (PET), polyethylene (PE), polyvinyl chloride (PVC), and polyamide (PA) particles detection. With the complete procedure of MR-API measurements, the recovery of MPs was 61.67-90.00 %. To validate the feasibility of the MR-API, the method was used to detect samples of known plastic types (mask leachates) and unknown plastic types (urban lake). A total of 4540 particles in the sample of mask leach-ates consuming 35 h 50 min 43 s, and 0.92 & PLUSMN; 0.49 % of particles were identified as MPs. The urban river sample ef-ficiently identified PP, PET, PE, PVC, PS, EVA, and VC/VAC MPs using this method. The detected MPs size ranged from 8.3 to 5000 & mu;m, saving 75.03 % and 58.38 % of the time compared to the conventional micro-FTIR and micro-Raman point-by-point methods, respectively. Therefore, this method is effective for detecting MPs in the environmental sam-ples and has excellent prospects.