Abstract:Solution processable flexible transparent electrodes (FTEs) are urgently needed to boost the efficiency and mechanical stability of flexible organic solar cells (OSCs) on a large scale. However, how to balance the optoelectronic properties and meanwhile achieve robust mechanical behavior of FTEs is still a huge challenge. Silver nanowire (AgNW) electrodes, exhibiting easily tuned optoelectronic/mechanical properties, are attracting considerable attention, but their poor contacts at the junction site of the AgNWs increase the sheet resistance and reduce mechanical stability. In this study, an ionic liquid (IL)-type reducing agent containing Cl- and a dihydroxyl group was employed to control the reduction process of silver (Ag) in AgNW-based FTEs precisely. The Cl- in the IL regulates the Ag+ concentration through the formation and dissolution of AgCl, whereas the dihydroxyl group slowly reduces the released Ag+ to form metal Ag. The reduced Ag grew in situ at the junction site of the AgNWs in a twin-crystal growth mode, facilitating an atomic-level contact between the AgNWs and the reduced Ag. This enforced atomic-level contact decreased the sheet resistance, and enhanced the mechanical stability of the FTEs. As a result, the single-junction flexible OSCs based on this chemically welded FTE achieved record power conversion efficiencies of 17.52% (active area: 0.062 cm2) and 15.82% (active area: 1.0 cm2). These flexible devices also displayed robust bending and peeling durability even under extreme test conditions.

Increase in the efficiency and stability of large-area flexible organic photovoltaic modules via improved electrical contact

Large‐Area Flexible Organic Photovoltaic Modules on Smoothened Silver Nanowire Transparent Electrodes with Thick Electron Transporting Layer

Flexible Silver Grid/Pedot:Pss Hybrid Electrodes for Large Area Inverted Polymer Solar Cells

54 cm 2 Large‐Area Flexible Organic Solar Modules with Efficiency Above 13%

Flexible organic photovoltaics based on water-processed silver nanowire electrodes

Biomimetic Electrodes for Flexible Organic Solar Cells with Efficiencies over 16%

Design of a Rigid Scaffold Structure Toward Efficient and Stable Organic Photovoltaics

Realizing 17.5% Efficiency Flexible Organic Solar Cells via Atomic-Level Chemical Welding of Silver Nanowire Electrodes

Synergistic Optimization Enables Large‐Area Flexible Organic Solar Cells to Maintain over 98% PCE of the Small‐Area Rigid Devices

Flexible High‐Performance and Solution‐Processed Organic Photovoltaics with Robust Mechanical Stability

PFSA-passivated silver nanowire transparent electrodes for highly flexible organic-light-emitting devices with improved stability

Flexible silver nanowire meshes for high-efficiency microtextured organic-silicon hybrid photovoltaics

Achieving 20.8% Organic Solar Cells Via Additive-Assisted Layer-by-layer Fabrication with Bulk P-I-n Structure and Improved Optical Management

Complete Solution-Processed Semitransparent and Flexible Organic Solar Cells: A Success of Polyimide/Ag-Nanowires- and PH1000-Based Electrodes with Plasmonic Enhanced Light Absorption

12.42% Monolithic 25.42 cm 2 Flexible Organic Solar Cells Enabled by an Amorphous ITO‐Modified Metal Grid Electrode

Bulk contact between silver nanowires top electrode and interface layer enables high performance of full‐solution processed semitransparent organic solar cell module

Unraveling the electrical energy loss in silver nanowire electrodes for flexible and Large-Area organic solar cells

Encapsulation improvement and stability of ambient roll-to-roll slot-die-coated organic photovoltaic modules

High‐Efficiency ITO‐Free Organic Photovoltaics with Superior Flexibility and Upscalability

Organic–inorganic hybrid cathode interlayer for efficient flexible inverted organic solar modules

High-Performance Organic Solar Modules Via Bilayer-Merged-Annealing Assisted Blade Coating