Abstract:Industrialization has led to an increasing need for specific and selective gas sensors in the past few decades. Environmental monitoring of certain volatile compounds such as ammonia is necessary. Advancements in the food storage sector have created the need for cheap and effective amine chemosensors. Classical chemosensors still face several issues, such as a lack of selectivity and low sensitivity toward ammonia and amines. Sensitivity is defined as the relative change in response expressed in percentage. In this work, we have resolved a few issues associated with the ammonia and amine sensors, such as low selectivity, long-term instability, and unreliability under higher temperatures using plasma-polymerized thiophene (PPTh) reduced graphene oxide (rGO) composite films. PPTh films were prepared using RF plasma polymerization with optimized deposition parameters. Several samples were evaluated for their sensing response to understand the optimal PPTh and rGO ratio in the PPTh-rGO composite. These composite PPTh-rGO films have shown 4 times higher sensitivity for ammonia/amines than individual PPTh and rGO films. Ammonia, methylamine (MA), dimethylamine (DMA), and trimethylamine (TMA) were primary analytes and tested for sensing response of the PPTh-rGO composite. The sensitivity measured ranges from 1328 for trimethylamine to 2354 for methylamine at 1000 ppm. The order of sensitivity was found to be MA > Ammonia > DMA > TMA. Polymer swelling, reduced charge carriers, and disruption of conductive pathways can explain possible sensing mechanisms. PPTh-rGO composite films have shown selectivity as high as 110 for ammonia/amine over other commonly used volatile organic compounds. The sensing response of these films is stable for any temperature fluctuations from 30 °C to 150 °C. Additionally, films showed stable sensitivity for over 4 months. Thus, composite films of PPTh-rGO can be effectively used to develop highly selective and stable gas sensors for the environmental monitoring of ammonia/amines.

Chemically sprayed pristine and Cd 2+ incorporated Co2SnO4 thin films for low ppm level enhanced chemi - resistive behaviour towards dimethylamine detection at room temperature

Study of A Qcm Dimethyl Methylphosphonate Sensor Based on A Zno-Modified Nanowire-Structured Manganese Dioxide Film

QCM Gas Sensor Based on Polypyrrole for Trimethylamine Detection"

GO/Cu2O Nanocomposite Based QCM Gas Sensor for Trimethylamine Detection under Low Concentrations

Chemical spray pyrolysis deposited ZnO/ZIF-8 and cobalt doped ZnO/ZIF-8 composite thin films for highly sensitive and selective ammonia sensing at room temperature

A Flexible and Polymer‐Based Chemiresistive CO2 Gas Sensor at Room Temperature

Chemiresistive Trimethylamine Sensor Using Monolayer SnO2 Inverse Opals Decorated with Cr2O3 Nanoclusters

Surface acoustic wave platform integrated with ultraviolet activated rGO-SnS2 nanocomposites to achieve ppb-level dimethyl methylphosphonate detection at room-temperature

Synthesis and characterization of Cr-doped cadmium oxide thin films for NH3 gas-sensing applications

Highly Sensitive Diethylamine Detection at Room Temperature Using g-C3N4 Nanosheets Decorated with CuO Hollow Polyhedral Structures

Gas sensors based on nanosized-zeolite films to identify dimethylmethylphosphonate

Room-temperature high-performance ammonia gas sensor based on layer-by-layer self-assembled molybdenum disulfide/zinc oxide nanocomposite film

Study of the response behavior of a CdS-SnO2 thick film for high selectivity towards propanol gas

Room-Temperature NH<sub>3</sub> Sensor Based on SnO<sub>2</sub> Quantum Dots Functionalized SnS<sub>2</sub> Nanosheets

Constructing bilayer sensors with Co-MOF-derived Co3O4 porous sensing films and SnO2 catalytic overlayers to enhance room-temperature triethylamine sensing performance

Room temperature sensing of ammonia and formaldehyde gases through novel anisotype heterojunction of p-Co3O4/n-Gd0.1Ce0.9O2-δ as highly responsive and stable sensors

Porous MoO 3 nanosheets for conductometric gas sensors to detect diisopropylamine

Violet phosphorus nanosheets for room-temperature dimethylamine detection and mechanism insights by DFT calculation

Plasma-Polymerized Thiophene-Reduced Graphene Oxide Composite Film Sensor for Ammonia/Amine Detection at Room Temperature

ZnO Hexagonal Nano- and Microplates Modified with Nanomaterials as a Gas-Sensitive Material for DMS Detection-Extended Studies

Room Temperature Operated Flexible La-ZnO/MWCNTs Sensor for ppb Level Carbon Monoxide Detection