Abstract:Conventional mechanical drilling of thick carbon fiber reinforced plastic (CFRP) composite laminates is prone to machining-induced defects such as burrs, delamination, and severe tool wear. However, pulsed laser drilling as an improved strategy results in hole taper and the formation of a heat-affected zone (HAZ). Herein, a new laser-mechanical composite drilling process is proposed, which combines the advantages of pulsed laser drilling for avoiding tool wear and twist drilling for achieving high dimensional accuracy, significantly improving the drilling quality of thick CFRP laminates. The evolution mechanism of the hole taper and HAZ with processing conditions in pulsed laser drilling is investigated. Furthermore, a theoretical model is established to reveal the material removal mechanism during the reaming process. The thrust force variation, drilling quality and tool wear are analyzed and verified by comparative experiments. The results show that due to the shielding effect from the surface materials, the maximum hole taper and HAZ at the hole exit reach up to 37.5° and 650 μm, respectively, which can be removed effectively by subsequent reaming operations. Due to its small amount of material removal, the peak thrust force and the average thrust force in laser-mechanical drilling are only 53.8 % and 37.6 % of the critical thrust force of delamination, respectively, which can effectively inhibit delamination. Compared with direct twist drilling, the average wear of the main cutting edge in laser-mechanical drilling is decreased by 60.87 %, which greatly reduces the size of the delamination by 55 %.

UV laser high-quality drilling of CFRP plate with a new interlaced scanning mode

Study on laser drilling induced defects of CFRP plates with different scanning modes based on multi-pass strategy

Drilling of CFRP plates with adjustable pulse duration fiber laser

Study on Robot Automatic Drilling of Carbon Fiber Reinforced Plastics (CFRP)

Femtosecond Laser Drilling of Cylindrical Holes for Carbon Fiber-Reinforced Polymer (CFRP) Composites

Comparative investigations on machinability and surface integrity of CFRP plate by picosecond laser vs laser induced plasma micro-drilling

Hole Quality and Thermal Defects in Drilled CFRP by Nanosecond Pulsed Laser

Dual-Method Characterization and Optimization of Drilling Parameters for Picosecond Laser Drilling Quality in CFRP

Reducing the taper and the heat-affected zone of CFRP plate by Micro fluid assisted laser induced plasma micro-drilling

Helical drilling of carbon fiber reinforced polymer by a femtosecond laser

Understanding factors affecting the process efficiency, quality and carbon emission in laser drilling of CFRP composite via tailored sequence multiple-ring scanning

Investigation on heat transfer and ablation mechanism of CFRP by different laser scanning directions

Improving hole quality of thick CFRP laminates through a laser-mechanical compound drilling process

Investigation of Heat Accumulation in Femtosecond Laser Drilling of Carbon Fiber-Reinforced Polymer

Ultrasonic-Vibration-Assisted Waterjet Drilling of [0/45/−45/90]2s Carbon-Fiber-Reinforced Polymer Laminates

Experimental study on CFRP drilling with the picosecond laser "double rotation" cutting technique

Investigating the Technology of UV Nanosecond Laser Milling for Cutting CFRP Laminates.

Effect of scanning spacing on the efficiency of CFRP hole-cutting with multi-pass scanning strategy by nanosecond laser

Experimental Study on Carbon Fiber-Reinforced Composites Cutting with Nanosecond Laser

Dimethicone-assisted interlaced scanning compound cutting for regulating thermal damage in CFRP laser cutting by synergistic suppression of coupled heat effect

Hole quality in longitudinal–torsional coupled ultrasonic vibration assisted drilling of carbon fiber reinforced plastics