Abstract:In order to track the free interface of the melt pool and understand the evolution of the melt pool, the flow of fluid, and the interface behavior of gas and liquid, a physical model is developed by using the VOF method in this paper. Its characteristics are a combined heat source model, including a parabolic rotation and a cylindrical distribution, and a powder bed stochastic distributed model with powder particle size. The unit interface between the metallic and gas phase in the laser–powder interaction zone can only be loaded by the heat source. Only the first and second laser scanning tracks are simulated to reduce the calculation time. The simulation results show that process parameters such as laser power and scanning speed have significant effects on the fluid flow and surface morphology in the melt pool, which are in good agreement with the experimental results. Compared with the first track, the second track has larger melt pool geometry, higher melt temperature, and faster fluid flow. The melt flows intensely at the initial position due to the high flow rate in the limited melt space. Because there is enough space for the metal flow, the second track can obtain smooth surface morphology more easily compared to the first track. The melt pool temperature at the laser beam center fluctuates during the laser scanning process. This depends on the effects of the interaction between heat conduction or heat accumulation or the interaction between heat accumulation and violent fluid flow. The temperature distribution and fluid flow in the melt pool benefit the analysis and understanding of the evolution mechanism of the melt pool geometry and surface topography and further allow regulation of the L-PBF process of Ti6Al4V.

Melt pool dynamics and pores formation in multi-track studies in laser powder bed fusion process

Modelling of keyhole dynamics and melt pool flow in laser powder bed fusion process

Formation mechanism of pore defects and surface ripples under different process parameters via laser powder bed fusion by numerical simulation and experimental verification

Numerical studies of melt pool and gas bubble dynamics in laser powder bed fusion process

Modeling and numerical studies of high-precision laser powder bed fusion

A three-phase model for simulation of heat transfer and melt pool behaviour in laser powder bed fusion process

Revealing transient powder-gas interaction in laser powder bed fusion process through multi-physics modeling and high-speed synchrotron x-ray imaging

Numerical Simulation in the Melt Pool Evolution of Laser Powder Bed Fusion Process for Ti6Al4V

Thermal and dynamic characteristics in the corners of LPBF-fabricated TC4 multi-track parts and the impact of contour scanning

The interplay between vapour, liquid, and solid phases in laser powder bed fusion

Particle scale modelling of powder recoating and melt pool dynamics in laser powder bed fusion additive manufacturing: A review

Experimental and numerical exploration of defocusing in Laser Powder Bed Fusion (LPBF) as an effective processing parameter

In-Situ Characterization of Pore Formation Dynamics in Pulsed Wave Laser Powder Bed Fusion

Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter and denudation zones

Numerical simulation of keyhole-induced pores for TA15 in laser powder bed fusion (L-PBF)

A novel smoothed particle hydrodynamics method for multi-physics simulation of laser powder bed fusion

Layer-to-Layer Melt Pool Control in Laser Powder Bed Fusion

Numerical simulation of melt pool size and flow evolution for laser powder bed fusion of powder grade Ti6Al4V

Particle tracking in a simulated melt pool of laser powder bed fusion

Multiphase mesoscopic simulation of multiple and functionally gradient materials laser powder bed fusion additive manufacturing processes

Finite element modeling of melt pool dynamics in laser powder bed fusion of 316L stainless steel