Abstract:Bio-aromatics preparation via in-situ catalytic pyrolysis of cellulose with lithium-ion battery ternary cathodes and ex-situ upgrading over Ru/HZSM-5 was studied. Three ternary cathodes with different ratios of Ni, Co, and Mn (NCM111, NCM532 and NCM811) were selected, and the effects of ternary cathodes and bifunctional Ru/HZSM-5 on the cellulose conversion were investigated from the perspectives of thermogravimetric kinetics and fixed-bed upgrading. The results indicated that cellulose pyrolyzed with cathodes reduced the solid residue content from 13.07% to 7.78%, 7.11%, and 6.63%, and decreased the weightlessness peak temperature from 358°C to 348°C, 347°C, and 341°C; herein, the reaction order gradually elevated from 1.34 to 1.67 with the increased cathode Ni ratio, but the activation energy and pre-exponential factor obviously reduced. In-situ catalytic pyrolysis of ternary cathodes combined with ex-situ upgrading of Ru/HZSM-5 resulted in more cellulose-derived products being converted, increasing bio-oil yield from 22.47% to 25.08%, 24.75%, and 25.42%. Furfural was largely deoxygenated and dehydrated to become the precursor of aromatics, so NCM111, NCM532 and NCM811 usage increased the MAHs selectivity from 28.42% to 78.69%, 85.98%, and 87.27%, and high Ni ratio had higher deoxygenation capability and aromatic selectivity, simultaneously, it prone to creating material basis and spatiotemporal conditions for alkylation side reaction to increase C9 and above hydrocarbons. However, 1 H NMR analysis confirmed that the main reaction of aromatization was still stronger than the side reaction even under high Ni ratio condition. Aromatics and coke production from acidic zeolite catalyzed reforming of oxygenates were competing reactions. In-situ catalysis of ternary cathodes produced more small molecule products to enter the inner pores of Ru/HZSM-5, forming more difficult to remove microporous coke, and the effect of increased Ni ratio was more obvious, but coke content reduced from 4.51% to 4.11%, 4.13%, and 3.05%, respectively.

Enhanced H2 production through biomass pyrolysis, applying an alkaline ceramic as a bifunctional material; lithium cuprate (Li2CuO2)

Engineering Functional Hydrochar Based Catalyst with Corn Stover and Model Components for Efficient Glucose Isomerization

Hydrothermal Carbonization of Cellulose and Xylan into Hydrochars and Application on Glucose Isomerization

Facile One-Pot Synthesis of Functional Hydrochar Catalyst for Biomass Valorization

Alkali metal bifunctional catalyst-sorbents enabled biomass pyrolysis for enhanced hydrogen production

Study on the Pyrolysis of Cellulose for Bio-Oil with Mesoporous Molecular Sieve Catalysts.

[Influence of ZSM-5(38)/Al-MCM-41 Composite Molecular Sieve Catalysts on Pyrolysis of Cellulose].

Investigation of Catalysts, CO 2 Sorbents and Their Combinations for Maximising H 2 Output During the Thermal Decomposition of Biomass

An Approach for Upgrading Behavior and Bio-Oil Production Using CO2-assisted Cellulose Pyrolysis in Cobalt-Based Ce/Fe/Mg Composite Catalyst

Augmenting levoglucosan production through catalytic pyrolysis of biomass exploiting Ti3C2T MXene

Bio-aromatics synthesis via catalytic pyrolysis of cellulose with lithium-ion battery cathodes and modified HZSM-5 coupled in-situ plasma mode

Catalytic pyrolysis of biomass components over mesoporous catalysts using Py-GC/MS

Increased high selectivity light aromatics and furans production by co-feeding methanol to catalytic pyrolysis of cellulose with Lanthanum-Cerium bimetallic modified MCM-41 catalysts

Spent lithium-ion battery materials recycling for catalytic pyrolysis or gasification of biomass

Novel Hierarchical Disordered Li- and Al-KIL-2 Catalysts for the Pyrolysis of Biomass Model Compounds and Wool Waste: A Comparison with ZSM-5

Rice Husk-Based Biogenic Silica-Anchored Sn-Co Bimetallic Catalysts for Cellulose Hydrogenolysis: Structural Regulation and Mechanism Study

Selective scission of glucose molecule by a Pd-modulated Co-based catalyst for efficient CO2 reduction under mild conditions

Efficient Catalytic Conversion of Glucose into 5-Hydroxymethylfurfural by Aluminum Oxide in Ionic Liquid

In-situ catalytic pyrolysis of cellulose with lithium-ion battery ternary cathodes and ex-situ upgrading over Ru/HZSM-5 for bio-aromatics

Catalytic Co-Pyrolysis of Low-Density Polyethylene and Lignin over Cu-modified HZSM-5: Insight with Online Photoionization Mass Spectrometry

Production of gasoline components from biomass catalytic hydropyrolysis using zeolite-based bifunctional catalysts