Abstract:The results of catalytic treatment of vapors exiting a g/min pyrolysis unit before product condensation to the liquid phase using a Ru/TiO2 catalyst for oak and switchgrass pyrolysis are reported. The pyrolysis is conducted at 500°C and the catalysis at 400°C at atmospheric pressure with a hydrogen partial pressure of 0.58 atm. It is found that the catalytic treatment provides significant conversion of light oxygenates to larger, less oxygenated, molecules and, simultaneously, bio‐oil phenolics are also converted to less oxygenated phenolics with methoxy methyl groups transferred to the ring. The activity of the catalyst gradually diminished with increasing biomass fed to the system. Untreated pyrolysis oil forms a single liquid phase with some tarry material, consistent with the literature, whereas the treated liquid product forms separate oil and aqueous phases, the latter of which is about 80% water. The oil from the treated vapors has a lower initial viscosity with only a small increase upon accelerated aging compared to the untreated product oil, which has a dramatic increase in viscosity after aging. This is indicative of poor oil stability for untreated oil that is further confirmed by large increases in molecular weight, while the treated oil has a small increase in molecular weight after accelerated aging. In an effort to understand compatibility with refinery streams, the solubility of the oils in tetralin was examined. The untreated oil was found to have very limited solubility in tetralin, whereas the treated oil phase was completely soluble except for a small aqueous phase that appeared. There are a number of challenges in developing a high yield process for pyrolysis based conversion of biomass to transportation fuels. The Ru/TiO2 catalyst used here shows promise for conducting multiple types of favorable reactions in the presence of the full spectrum of primary pyrolysis products that creates significant product stability under mild conditions. This could lead to higher liquid yields of stable, refinery compatible, product oil. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2275–2285, 2013

Augmenting levoglucosan production through catalytic pyrolysis of biomass exploiting Ti3C2T MXene

Pyrolyzing Renewable Sugar and Taurine on the Surface of Multi-Walled Carbon Nanotubes As Heterogeneous Catalysts for Hydroxymethylfurfural Production

Engineering Functional Hydrochar Based Catalyst with Corn Stover and Model Components for Efficient Glucose Isomerization

Boosting production of useful chemicals and micro-mesopores biochar from in situ catalytic pyrolysis of cellulose with red mud

On-line Catalytic Upgrading of Biomass Fast Pyrolysis Products

Catalytic pyrolysis of biomass for biofuels production

A novel three-stage ex-situ catalytic pyrolysis process for improved bio-oil yield and quality from lignocellulosic biomass

Direct Catalytic Upgrading of Biomass Pyrolysis Vapors by a Dual Function Ru/TiO2 Catalyst

Catalytic Upgrading of Biomass Fast Pyrolysis Vapors with Nano Metal Oxides: An Analytical Py-GC/MS Study

Catalytic Upgrading of Biomass Fast Pyrolysis Vapors with Titania and Zirconia/Titania Based Catalysts

Improving catalytic production of aromatic hydrocarbons with a mesoporous ZSM-5 modified with nanocellulose as a green template

Catalytic upgrading of biomass pyrolysis volatiles over Y zeolites modified with different metal oxides

Improving Aromatic Hydrocarbon Content from Catalytic Pyrolysis Upgrading of Biomass on a CaO/HZSM-5 Dual-Catalyst

Silicon Carbide Foam Supported ZSM-5 Composite Catalyst for Microwave-Assisted Pyrolysis of Biomass

Biomass Valorization through Catalytic Pyrolysis Using Metal-Impregnated Natural Zeolites: From Waste to Resources

Reaction induced thermally stabilized TS-1 zeolite as a novel long-lasting catalyst for methyl lactate production

Production of gasoline components from biomass catalytic hydropyrolysis using zeolite-based bifunctional catalysts

Novel Approach on Developing TiO2-Supported Heteropolyacids Catalyst for the Efficient Conversion of Xylose to Furfural

Increased high selectivity light aromatics and furans production by co-feeding methanol to catalytic pyrolysis of cellulose with Lanthanum-Cerium bimetallic modified MCM-41 catalysts

Enhanced H2 production through biomass pyrolysis, applying an alkaline ceramic as a bifunctional material; lithium cuprate (Li2CuO2)

Ex-situ Catalytic Microwave Pyrolysis of Lignin over Co/ZSM-5 to Upgrade Bio-Oil