Abstract:Lithium-sulfur (Li-S) batteries are regarded as one of the promising advanced energy storage systems due to their ultrahigh capacity and energy density. However, their practical applications are still hindered by the serious shuttle effect and sluggish reaction kinetics of soluble lithium polysulfides. Herein, g-C3N4 nanosheets and graphene decorated with an ultrafine Co-species nanodot heterostructure (Co@g-C3N4/G) as separator coatings were designed following a facile approach. Such an interlayer can not only enable effective polysulfide affinity through the physical barrier and chemical binding but also simultaneously have a catalytic effect on polysulfide conversion. Because of these superior merits, the Li-S cells assembled with Co@g-C3N4/G-PP separators matched with the S/KB composites (up to ~70 wt% sulfur in the final cathode) exhibit excellent rate capability and good cyclic stability. A high specific capacity of ~860 mAh g−1 at 2.0 C as well as a capacity-fading rate of only ~0.035% per cycle over 350 cycles at 0.5 C can be achieved. This bifunctional separator can even endow a Li-S cell at a low current density to exhibit excellent cycling capability, with a capacity retention rate of ~88.4% at 0.2 C over 250 cycles. Furthermore, a Li-S cell with a Co@g-C3N4/G-PP separator possesses a stable specific capacity of 785 mAh g−1 at 0.2 C after 150 cycles and a superior capacity retention rate of ~84.6% with a high sulfur loading of ~3.0 mg cm−2. This effective polysulfide-confined separator holds good promise for promoting the further development of high-energy-density Li-S batteries.

Double hollow spherical SnO2@Co3O4 applied to separator for efficient catalysis of polysulfides in lithium-sulfur batteries

Effective Dual Polysulfide Rejection by a Tannic Acid/Fe-III Complex-Coated Separator in Lithium-Sulfur Batteries

Suppression Of Polysulfide Shuttling With A Separator Modified Using Spontaneously Polarized Bismuth Ferrite For High Performance Lithium-Sulfur Batteries

Sulfur-doped hollow C@CoP nanosphere modified separator for enhancing polysulfides anchoring and conversion in Li–S batteries

Multifunctional separator modified with catalytic multishelled structural CoS2 enables stable lithium-sulfur battery

Modified separators boost polysulfides adsorption-catalysis in lithium-sulfur batteries from Ni@Co hetero-nanocrystals into CNT-porous carbon dual frameworks

Ultrafine Co-Species Interspersed g-C3N4 Nanosheets and Graphene as an Efficient Polysulfide Barrier to Enable High Performance Li-S Batteries

Promoting Reversible Redox Kinetics by Separator Architectures Based on CoS 2 /HPGC Interlayer as Efficient Polysulfide‐Trapping Shield for Li–S Batteries

Enlarged interlayer of separator coating enabling high-performance lithium–sulfur batteries

Synergistic inhibitory effect of ultralight CNTs-COOH@Fe3O4 modified separator on polysulfides shuttling for high-performance lithium–sulfur batteries

Tg-C 3 N 4 -coated functional separator as polysulfide barrier of high-performance lithium-sulfur batteries

Interfacial "Double-Terminal Binding Sites" Catalysts Synergistically Boosting the Electrocatalytic Li2S Redox for Durable Lithium-Sulfur Batteries

Multifunctional cation-vacancy-rich ZnCo2O4 polysulfide-blocking layer for ultrahigh-loading Li-S battery

The Effective Design of a Polysulfide-Trapped Separator at the Molecular Level for High Energy Density Li-S Batteries

Application of ZIF-67/ZIF-8 derived Co3O4/ZnO heterojunction in lithium-sulfur battery separators

Efficient Catalysis of Ultrathin Two-Dimensional Fe2 O3 -CoP Heterostructure Nanosheets for Polysulfide Redox Reactions

Efficient Catalysis of Ultrathin Two-Dimensional Fe2O3-CoP Heterostructure Nanosheets for Polysulfide Redox Reactions

Inhibiting polysulfides diffusion of lithium-sulfur batteries using an acetylene black-CoS2 modified separator: Mechanism research and performance improvement

Multifunctional Composite Separator Based on NiS2/NiSe2 Homologous Heterostructure Polyhedron Promotes Polysulfide Conversion for High Performance Lithium-Sulfur Batteries.

Dynamic Intercalation-Conversion Site Supported Ultrathin 2D Mesoporous SnO2/SnSe2 Hybrid As Bifunctional Polysulfide Immobilizer and Lithium Regulator for Lithium-Sulfur Chemistry.

Cobalt/MXene‐derived TiO2 heterostructure as a functional separator coating to trap polysulfide and accelerate redox kinetics for reliable lithium‐sulfur battery