Abstract:Improving aircraft environmental control systems could reduce the risk of airborne infectious disease transmission in aircraft cabins. The high-efficiency particulate air (HEPA) filters used in the existing systems exhibit high pressure drop, which results in high consumption of energy and fuel. Nanofiber air filters fabricated by electrospinning can reduce pressure drop, but their performance in aircraft cabins is unknown. Therefore, this study experimentally investigated the interpersonal particle transport in an aircraft cabin mockup with nanofiber air filters. First, a full-scale, fully occupied, 7-row, single-aisle aircraft cabin mockup was constructed. Nanofiber filtration units were fabricated using the electrospinning technique. Under the well-sealed laboratory testing conditions, both the small-scale nanofiber and HEPA filter media exhibited a particle removal efficiency of around 99 %. The performance of nanofiber and HEPA filtration units installed in the environmental control system of the mockup was then measured. Finally, the interpersonal particle transport in the cabin was measured. The results show that the particle removal efficiency of the nanofiber filtration units installed in the environmental control system ranged from 64 to 72 % when the particle size was 0.3-0.4 μm, which primarily reflected the large air leakages associated with the filter installation. At the filter media level, the pressure drop across the nanofiber units in the mockup was 61-67 % lower than that across the HEPA units under the same airflow rate, which however may not necessarily translate into lower pressure drop for actual filters in aircraft due to the potentially different design in terms of media face area. The average normalized particle concentration in the breathing zones of fellow passengers in the cabin mockup with the nanofiber filtration units was by 0.23, 0.29, and 0.32, respectively, when the index passenger was seated at the window, middle, and aisle.

Fabrication of natural fiber-mixed natural matrix composite-infused indoor air purifier with health impact simulation

Development of air purifying curtain using activated charcoal embedded multilayer fabric for effective indoor air filtration

Development of Smart Air Purifier for Reducing Indoor Particulate Matter

Porous Cellulose Nanofiber Stringed HKUST-1 Polyhedron Membrane for Air Purification

Exploring the long-term performance of air purifiers in removing particulate matter and formaldehyde across different residential environments

Environmentally friendly and energy-self-sufficiency-based air purifier: an approach for mitigating outdoor particulate matter

Development of SPI/AC/PVA nano-composite for air-filtration and purification

Comparative Filtration Performance of Composite Air Filter Materials Synthesized Using Different Impregnated Porous Media

Silk nanofibers as high efficient and lightweight air filter

Modeling the Geometry and Filter Composite of the Air Cleaner

Facile fabrication of reinforced sub-micron fibrous media with hierarchical structure compounded thermally for effective air purification in application

Building a Tailored Frame-Channel Structure for High-Performance Protein Air Filters

Ultrathin, ultralight dual-scale fibrous networks with high-infrared transmittance for high-performance, comfortable and sustainable PM0.3 filter

Protein-based materials for sustainable, multifunctional air filtration

MnO 2 -loaded flexible mullite nanofiber filter materials for removing particulate matter and formaldehyde from indoor air

Experimental investigation of interpersonal particle transport in an aircraft cabin mockup with nanofiber air filters

Plasma weaving net device for purifying indoor air

Indoor air quality improvement with filtration and UV-C on mitigation of particulate matter and airborne bacteria: Monitoring and modeling.

Semi-outdoor filterless air purifier for smog and microbial protection with water purifier system

A new double-skin façade system integrated with polyurethane sponges and TiO 2 plates for removing indoor PM and BTEX

Textiles/Metal-Organic Frameworks Composites as Flexible Air Filters for Efficient Particulate Matter Removal