Abstract:INTRODUCTION High resolution diffusion tensor imaging is a desirable technique to improve the depiction of neural anatomy structures. Earlier work has shown that the feasibility of achieving high resolution diffusion tensor imaging using an interleaved variable-density spiral (VDS) [1] readout trajectory and iterative phase correction algorithm (SNAILS technique) [2]. However, this technique requires long acquisition time even for low directional resolution, such as 6 directions. With parallel imaging [3], the acquisition speed can be increased, but higher acceleration factor for parallel imaging introduces amplified noise which then hinders the practical application. CORNOL reconstruction [4] has been proved to be effective in noise suppression and image structure preservation for high acceleration acquisitions. This study combines highly accelerated parallel imaging and VDS for high resolution DTI. Improved CORNOL (iCORNOL) which is tailored for VDS DTI is employed for artifacts suppression. To our knowledge, it is the first time to develop high spatio-temporal resolution DTI on Philips 3T MRI scanner. METHODS An interleaved VDS [1] diffusion weighted sequence was implemented on a Philips 3T clinical scanner (Achieva, Philips, Best, The Netherlands) equipped with a high performance gradient set (60mT/m per gradient axis, slew rate 200mT/m/msec). Brain images were acquired from three healthy volunteers using an 8-channel head coil. Scan parameters were: b = 600 s/mm, FOV = 220 × 220 mm, matrix size = 256 × 256, slice thickness = 5 mm, TR/TE = 2500/80ms, α = 3 (α is the parameter controlling the sampling density), number of interleaves = 24, readout duration for each interleave = 16.9ms (3456 points), acquisition bandwidth = 100 kHz, diffusion encoding directions = 6. All subjects provided informed written consent. For parallel imaging, reduction factor was 4. iCORNOL (refer to our another abstract 4341 for technical details) reconstruction was compared with conjugate gradient SENSE (CG-SENSE)[5]. All reconstruction methods were combined with direct phase subtraction. RESULTS AND DISCUSSIONS The first row in Fig.1 shows b0 image, diffusion weighted image, trace map and FA map from fully sampled data. 2 row in Fig.1 shows results from undersampled data reconstructed by CG-SENSE. With a reduction factor as high as 4, aliasing artifacts are unacceptable. Additionally, CG-SENSE reconstruction introduced significant noise which decreases the accuracy of high resolution diffusion tensor imaging. This problem can be better visualized from the FA map, from which no contrast information can be acquired. 3 row of Fig. 1 shows the iCORNOL reconstructed image using the same set of under sampled data as 2 row. Blurring and aliasing artifacts are largely alleviated, structure information and contrast are mostly preserved. Moreover, SNR loss is much smaller compared to images reconstructed from CG-SENSE. Parallel imaging based on SENSE reconstruction provides a choice to reduce the total scan time but may introduce amplified noise that can dramatically degrade the quality of final images, regularization alleviates the problem by imposing priors on parallel imaging reconstruction. iCORNOL, which is exclusively tailored for VDS, uses intrastructure smoothness to preserve the image structure and reduces noise, and achieves significant improvements of image quality in this experiment. VDS is one of optimal choices for multi-shot diffusion weighted imaging due to its self-navigating capability and insensitivity to motion. Another advantage of variable density trajectory is the incoherent undersampling artifacts, which make it suitable for nonlinear reconstruction methods. One drawback of VDS is its sensitivity to eddy current. This problem could be lessened by measuring spiral trajectories, which were widely studied. CONCLUSIONS: A high spatio-temporal resolution DTI sequence was implemented on Philips 3T clinical scanner and iCORNOL was applied for the highly accelerated acquisition reconstruction. Previous studies using parallel imaging method for high resolution DTI had a reduction factor up to 3 [6]. Our preliminary results demonstrated that scan time can be further reduced by a factor of four with well-reserved structure details and considerable high SNR. Further studies are needed to optimize the sequence parameter and reconstruction algorithm. ACKNOWLEDGEMENT: This work is supported by National Key Technology R&D Program in the 12th Five year Plan. The authors would like to thank Dr. Dong-hyun Kim for helpful discussions. REFERENCE: [1] Dong-hyun Kim et al. MRM 2003; 50:214-219. [2] Chunlei Liu et al. MRM 2004; 52:1388-1396 [3] Pruessmann KP et al. MRM 1999; 42:952-962. [4] Sheng Fang et al. MRM 2010; 64:1414-1426. [5] Pruessmann KP et al. MRM 2001; 46:638-651; [6] Chunlei Liu et al. MRM 2004; 52:1388-1396. b = 0 DWI Trace map FA map

Down-sampling in diffusion MRI: a bundle-specific DTI and NODDI study

Analysis of the effects of noise, DWI sampling, and value of assumed parameters in diffusion MRI models

A framework for optimizing the acquisition protocol multishell diffusion‐weighted imaging for multimodel assessment

Assessing Microstructural Substrates of White Matter Abnormalities: A Comparative Study Using DTI and NODDI

NODDI: Practical in vivo neurite orientation dispersion and density imaging of the human brain

NODDI-DTI: Estimating Neurite Orientation and Dispersion Parameters from a Diffusion Tensor in Healthy White Matter

Effects of Dementia and MCI on Diffusion Tensor Metrics Using the Updated ADNI3 DTI Preprocessing Pipeline

NODDI-SH: a computational efficient NODDI extension for fODF estimation in diffusion MRI

NODDI reproducibility and variability with magnetic field strength: A comparison between 1.5 T and 3 T

Single-Shell NODDI Using Dictionary Learner Estimated Isotropic Volume Fraction

Improving Estimation of Fiber Orientations in Diffusion MRI Using Inter-Subject Information Sharing

Angular Resolution Enhancement of Diffusion MRI Data Using Inter-Subject Information Transfer.

In vivo disentanglement of diffusion frequency‐dependence, tensor shape, and relaxation using multidimensional MRI

Optimization of Number of Diffusion Gradient Directions on anisotropy indices and deterministic fiber tracking for diffusion tensor imaging

Denoising Improves Cross-Scanner and Cross-Protocol Test-Retest Reproducibility of Higher-Order Diffusion Metrics

NODDI in clinical research

High Resolution DTI using Highly Undersampled Variable Desnity Acquisition and iCORNOL Reconstruction

Sensitivity of quantitative diffusion MRI tractography and microstructure to anisotropic spatial sampling

Evaluation Of Deterministic And Probabilistic Diffusion Tensor Imaging Fiber Trackings Using Number Of Diffusion Gradient Directions

The Performance of NODDI Estimation Using a Common 2-Shell Protocol

Parameters Optimization of Data Acquisition Techniques in Diffusion Tensor Imaging