Abstract:The complex three-shaft three-reducer structural designs of helicopter transmission systems are prone to changes in the relative positions of shafting under the conditions of main rotor and tail rotor loads. These changes will affect the transmission characteristics of the entire transmission system. In this study, the planetary gear trains of helicopters were examined. Due to the fact that these structures are considered to be the most representative structures of the main reducers of helicopters, they were selected as the study objects for the purpose of examining the meshing characteristics of planetary gear trains when the relative positions of the shafting changed due to the position changes of the main rotor shafts under variable load conditions. It was found that by embedding the comprehensive time-varying meshing stiffness values of the main rotor shafts at different positions, a dynamic model of the relative position changes of the planetary gear trains could be established. Then, combined with the multibody dynamics software, the meshing characteristics of the sun gears, and the planetary gears, the planetary gears and the inner ring gears were simulated and analyzed under different inclinations and offsets of the shafting. The results obtained in this study revealed the following: (1) the average meshing force of the gears increased with the increases in the angle inclinations, and the meshing force between the sun gears and the planetary gears increased faster than the meshing force between the planetary gears and the inner ring gears. It was observed that during the changes in the shafting tilt positions, obvious side frequency signals had appeared around the peak of the meshing frequency in the spectrum. Then, with the continuous increases in the tilt position, the peak was gradually submerged; (2) the average meshing force of the gears increased with the increases in the offset, and the increasing trend of the meshing force between the sun gears and the planetary gears was similar to that observed between the planetary gears and the inner ring gears. It was found that when the shafting offset position changed, there were obvious first and second frequency doubling in the spectrum; (3) the mass center orbit radii of the sun gears increased with the increases in the shafting position changes, and the changes in the angular tilt position were found to have greater influencing effects on the mass center orbit radii of the sun gears than the changes in the offset positions. This study’s research findings will provide a theoretical basis for future operational status monitoring of the main transmission systems of helicopters and are of major significance for improvements in the operational stability of helicopter transmission systems, which will potentially ensure safe and efficient operations.

Meshing characteristics and dynamic characteristics of planetary transmission system with new tooth-type flexible ring gear

Characteristics analysis of the new flexible ring gear for helicopter reducer

Dynamic modeling and analysis of planetary gear train system considering structural flexibility and dynamic multi-teeth mesh process

An Analysis of the Gear Meshing Characteristics of the Main Planetary Gear Trains of Helicopters Undergoing Shafting Position Changes

The Analysis of the Flexible Load Sharing Structure of the Ring Gear in Planetary Transmission

Dynamic modeling and analysis of high-speed flexible planetary gear transmission systems

Analysis of the Load Sharing of the Flexible Ring Gear Planetary Gear Train

Fractal Modeling of Gear Tooth Surface Profile and Research on Meshing Stiffness of Planetary Gear System with High-Power Density

Precise modeling of complex tooth surface microtopography and multi-degree-of-freedom nonlinear friction dynamics for high-performance face gear

Analysis of Planetary Gear Transmission Characteristics Based on ANSYS

Meshing principle and characteristics analysis of an abnormal cycloidal internal gear transmission

Study on Structural Vibration Characteristics of L-Shaped Flexible Ring Gear and Establishment of System Coupling Vibration Model

Dynamic characteristics analysis of profile-shifted planetary gears considering friction

Load sharing and distributed on the gear flank of wind turbine planetary gearbox

The effect of floating spline parameter on the dynamic characteristic of encased differential planetary gear train

Dynamic characteristics of the ring gear structure of two-stage plastic planetary reducers

Meshing impact analysis of planetary transmission system considering the influence of multiple errors and its effect on the load sharing and dynamic load factor characteristics of the system

Study on dynamic characteristics of the gear-dual-rotor system with multi-position rubbing

Calculation Method of Dynamic Stress of Flexible Ring Gear and Dynamic Characteristics Analysis of Thin-Walled Ring Gear of Planetary Gear Train

Non-inertial dynamic modeling and gear mesh characteristic analysis of planetary gear train system

Tribo-dynamics Modeling and Analysis of Planetary Gear Bearing Systems in Wind Turbines Considering Sun-Planetary-ring Helical Gear Mesh and Elastic Deformation Effects