Abstract:High-performance flexible piezoelectric polymer–ceramic composites are in high demand for increasing wearable energy-harvesting applications. In this work, a strategy combining solid-state shear milling (S3M) and fused filament fabrication (FFF) 3D-printing technology is proposed for the fabrication of high-performance biomimetic wearable piezoelectric poly(vinylidene fluoride) (PVDF)/tetraphenylphosphonium chloride (TPPC)/barium titanate (BaTiO3) nanocomposite energy harvesters with a biomimetic fish-scale-like metamaterial. The S3M technology could greatly improve the dispersion of BaTiO3 sub-micrometer particles and the interfacial compatibility, resulting in better processability and piezoelectric performance of the nanocomposites. Typically, the FFF 3D printed energy harvester incorporating 30 wt % BaTiO3 showed the highest piezoelectric outputs with an open-circuit voltage of 11.5 V and a short-circuit current of 220 nA. It could hence drive nine green LEDs to work normally. In addition, a 3D-printed biomimetic wearable energy harvester inspired by an environmentally adaptive fish-scale-like metamaterial was further fabricated. The fish-scale-like energy harvester could harvest energy through different deformation motions and successfully recharge a 4.7 μF capacitor by being mounted on a bicycle tire and the tire's rolling. This work not only provides a 3D printing strategy for designing diversified and complex geometric structures but also paves the way for further applications in flexible, wearable, self-powered electromechanical energy harvesters.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c02491.Schematic diagram of solid-state shear milling equipment, ion–dipole interaction between the positively charged surfaces of TPPC and the CH2–CF2 dipoles in PVDF molecular chains, X-ray diffraction patterns and FT-IR spectra of the printed PVDF and PVDF/BaTiO3 nanocomposites, SEM images of 3D-printed nanocomposites, schematic diagram of the COMSOL simulation of PVDF embedded with BaTiO3 nanoparticles, the piezoelectric output current of BT30 under a linear motor at different accelerations, digital photo of the biomimetic energy harvester showing a clear fish-scale structure, the COMSOL simulation results of the energy harvester with a fish-scale-like structure, and a schematic diagram of the fixed–fixed end beam model (PDF)Commercial LEDs driven by a square energy harvester (MP4)Output current generated by the fish-scale-like energy harvester as a bicycle tire rolls (MP4)Process for charging a 4.7 μF capacitor by the fish-scale-like energy harvester (MP4)This article has not yet been cited by other publications.

Niobium‐Doped Bismuth Titanate‐Loaded PVDF‐HFP Flexible Composite Films for Self‐Powered Stair Sensing and Emergency Alert Applications via Hybrid Mechanical Energy Harvesters

High-Efficiency Poly(Vinylidene Fluoride-Co-Hexafluoropropylene) Loaded 3D Marigold Flower-Like Bismuth Tungstate Triboelectric Films for Mechanical Energy Harvesting and Sensing Applications

Microarchitectured strontium doped silver niobate embedded ecoflex composite films for highly efficient box-type mechanical energy harvesters

Perovskite V–NaNbO 3 embedded PDMS composite film-based robust hybrid nanogenerator for efficient mechanical energy harvesting

Mechanical and Acoustic‐Driven BiFeO3 Composite Films‐Based Hybrid Nanogenerator for Energy Harvesting and Sensing Applications

Piezo-triboelectric hybridized nanogenerator embedding MXene based bifunctional conductive filler in polymer matrix for boosting electrical power

PDA‐Ag/TiO2 Nanoparticles‐Loaded Electrospun Nylon Composite Nanofibrous Film‐Based Triboelectric Nanogenerators for Wearable Biomechanical Energy Harvesting and Multifunctional Sensors

Flexible Hybrid Piezoelectric‐Electrostatic Device for Energy Harvesting and Sensing Applications

Multifunctional Thermochromic Dye‐Integrated Hybrid Nanogenerators for Mechanical Energy Harvesting and Real‐Time IoT Sensing

Multistage SrBaTiO3 /PDMS Composite Film-Based Hybrid Nanogenerator for Efficient Floor Energy Harvesting Applications

Stretchable, Breathable, and Stable Lead‐Free Perovskite/Polymer Nanofiber Composite for Hybrid Triboelectric and Piezoelectric Energy Harvesting

Hierarchically Architected Polyvinylidene Fluoride Piezoelectric Foam for Boosted Mechanical Energy Harvesting and Self-Powered Sensor

Ultrahigh‐Output Triboelectric and Electromagnetic Hybrid Generator for Self‐Powered Smart Electronics and Biomedical Applications

High-Performance Piezoelectric Nanogenerators with Imprinted P(Vdf-Trfe)/Batio3 Nanocomposite Micropillars for Self-Powered Flexible Sensors

Combining Solid-State Shear Milling and FFF 3D-Printing Strategy to Fabricate High-Performance Biomimetic Wearable Fish-Scale PVDF-Based Piezoelectric Energy Harvesters

Dynamic Pluronic F127 Crosslinking Enhancement of Biopolymeric Nanocomposites for Piezo-Triboelectric Single-Hybrid Nanogenerators and Self-Powered Sensors

Mechanical Energy Harvesting and Specific Potential Distribution of a Flexible Piezoelectric Nanogenerator Based on 2-D BaTiO 3 -Oriented Polycrystals

Enhanced Piezoelectric Energy Harvester by Employing Freestanding Single‐Crystal BaTiO3 Films in PVDF‐TrFE Based Composites

A multiferroic module for biomechanical energy harvesting

Harnessing piezoelectric and flexoelectric synergies in one-dimensional heterostructure nanofibers for nano-energy harvesting and self-powered sensors

Human body stimuli-responsive flexible polyurethane electrospun composite fibers-based piezoelectric nanogenerators