A novel combined system for efficient nitrate removal using a continuous flow electrocoagulation and sand filtration (FECF) reactor: Statistical analysis by Taguchi design
Yaser Rezaeizad Farshi,Taghi Ebadi,Reza Maknoon,Elaheh Kowsari
DOI: https://doi.org/10.1007/s11356-023-31362-2
IF: 5.8
2023-12-15
Environmental Science and Pollution Research
Abstract:In this study, a new hybrid bench-scale electrocoagulation-sand filtration (FECF) reactor was developed for purifying nitrate-contaminated samples. Before and after electrochemical treatment, two sand filters were included in this continuous system to facilitate the purification procedure, and the contaminated water flows horizontally through the entire system according to a specific hydraulic gradient within the reactor, resulting in water purification. Significant improvement in treatment performance was observed due to the presence of metal hydroxides in the second filter media that were not fully involved in the electrocoagulation treatment. Energy dispersive X-ray (EDX) analysis was performed to detect metal hydroxide species in the sand media, and the need for filter regeneration was evaluated by monitoring changes in the system flow rate. Moreover, an evaluation of the effects of different factors including operating time, current intensity, initial pH, type of anode and cathode, initial nitrate concentration, hydraulic head level inside the reactor, number of electrodes, and NaCl electrolyte concentration on the performance of nitrate removal was conducted through the Taguchi design. Further, ANOVA analysis verified the accuracy of the predicted model, and the variables were classified based on their relative importance in the FECF process. According to the regression model, 97% of nitrates were removed with Al electrodes as anode and Fe as cathode, 70 min purification time, current intensity of 3 A, 100 mg/l initial nitrate concentration, pH 8, electrolyte concentration of 1 g/l, electrode number of 6, and 1.5 cm head level.
environmental sciences