Abstract:Compared with the use of other types of sensors, there are significant advantages in making measurements of low speed gas flows by using a fiber-optic ‘hot-wire’ sensor. Measurements of this type using intrinsically safe fiber optic technology play an important role in industry, especially in coal mine gas clearance, roadway ventilation and fire safety warning. However, the ‘line-diameter ratio’ of the fiber-optic ‘hot-wire’ wind speed sensor described in previous work is far smaller than that for the traditional electronic hot-wire sensor and this requires investigation and optimization. To do that necessitates considering the combined influence of factors such as forced convection, natural convection, radiation heat transfer and heat conduction on the operation of the sensor probe, especially on the heat transfer between the sensor element and the base, when analyzing the performance of the fiber-optic ‘hot-wire’ gas flow speed sensor and in modelling its characteristics. Based on the results of the model of electronic hot-wire sensor created, this paper presents a method to improve and indeed further enhance the performance of the sensor, having a focus on the proportion of convective heat transfer to the total energy dissipation under different ambient and different wind speed conditions, as well as the influence of different ambient temperatures on the sensor probe. The results of the numerical simulation and the experimental verification carried out show that the measurement error was less than ±0.2 m/s, when used within the gas flow speed range of 0−6 m/s. Compared with the situations before the compensation was applied, the measurement error in the use of the sensor is reduced and the sensor performance significantly improved.

What problem does this paper attempt to address?

### Problems the Paper Attempts to Solve This paper aims to address several key issues in low-speed gas flow measurement, particularly the design and optimization of a temperature-compensated optical fiber gas flow sensor based on the optical fiber "hot-wire" principle. Specifically, the paper focuses on the following aspects: 1. **Sensor Performance Optimization**: - Traditional electronic hot-wire anemometers (EHWA) have a relatively long wire diameter ratio (about 300), whereas optical fiber hot-wire anemometers (OHWA) have a much smaller wire diameter ratio (only about 10). This difference makes the infinite flow field model no longer applicable to the design of OHWA, necessitating the development of new mathematical models to analyze and optimize the performance of OHWA. 2. **Impact of Heat Transfer Modes**: - In gas flow, OHWA is influenced by various heat transfer modes such as forced convection, natural convection, radiation heat transfer, and conduction. The impact of these factors on sensor performance under different ambient temperatures and wind speed conditions needs to be studied and modeled in detail. 3. **Temperature Compensation**: - Changes in ambient temperature can significantly affect the measurement accuracy of the sensor. The paper proposes a method to achieve temperature compensation for sensor performance under different ambient temperatures through numerical simulation and experimental validation, thereby improving measurement accuracy. 4. **Reduction of Measurement Errors**: - By optimizing sensor design and introducing a temperature compensation mechanism, the paper demonstrates how to reduce measurement errors to within ±0.2 m/s, particularly in the gas flow speed range of 0-6 m/s. ### Summary The paper establishes a mathematical model that considers multiple heat transfer modes to optimize the design of the optical fiber "hot-wire" sensor and validates its performance through numerical simulation and experiments. Ultimately, the proposed method significantly improves the measurement accuracy and reliability of the sensor under different ambient temperatures, making it particularly suitable for applications such as mine ventilation, road ventilation, and fire safety.

Temperature-compensated fiber-optic gas flow speed sensor based on the ‘Hot-wire’ principle

Development of a Gas Flow Sensor Based on FS5 Hot-Film Probe

Study on new gas flow sensor based on hot-film probe

Study on Temperature and Current Sensors Based on Optical Driving Optical Fiber Transmission

An Improved Y2o3-Zro2 Waveguide-Fiber-Optic Sensor For Measuring Gas Flow Temperature Above 2000 Degrees C

An improved Y2O3-ZrO2 waveguide-fiber-optic sensor for measuring gas flow temperature above 2000°C

Optical Sensor of Thermal Gas Flow Based on Fiber Bragg Grating

Hot Cavity Optical Fiber Fabry–Perot Interferometer As a Flow Sensor with Temperature Self-Calibrated

Novel Integrated Optical Fiber Sensor for Temperature, Pressure and Flow Measurement

Thermal Gas Flow Measurement Based on Single Sensor

Development of Low Velocity Gas Flow Sensor

Temperature Compensation of Optical Fiber Current Sensors With a Static Bias

An optical fiber sensor for simultaneous measurement of flow rate and temperature in the pipeline

Optical Fiber Magneto-Optic Sensor in the Turbine Mass Flowmeter

Thermal Conductivity Gas Sensor with Enhanced Flow-Rate Independence

Double F-P Interference Optical Fiber High Temperature Gas Pressure Sensor Based on Suspended Core Fiber

Highly Sensitive Gas Pressure Sensing with Temperature Monitoring Using a Slightly Tapered Fiber with an Inner Micro-Cavity and a Micro-Channel

"Hot-Wire" Microfluidic Flowmeter Based on a Microfiber Coupler.

A Novel Low-Power-Consumption All-Fiber-Optic Anemometer with Simple System Design

Compact Optical Fiber Sensor Based on Silica Capillary Tube for Simultaneous High Temperature and Transverse Load Measurement

Hybrid Fiber Optic Sensor, Based on the Fabry–Perot Interference, Assisted with Fluorescent Material for the Simultaneous Measurement of Temperature and Pressure