The Effect of Pore Sizes on D2/H2 Separation Conducted by MOF-74 Analogue

Wenjing Wang,Yanxi Tan,Chunqing Ji,Fan Wu,Daqiang Yuan,Liqiong Li

DOI: https://doi.org/10.1039/d2qi00156j

IF: 7.779

Inorganic Chemistry Frontiers

Abstract:Four stable MOF-74 analogue Ni2(dobdc), Ni2(dobpdc), Ni2(olz) and Ni2(dotpdc) possess abundant open metal sites (OMSs) and honeycomb channels with pore sizes ranging from 1.0 to 2.6 nm, are used to...

Materials Science,Chemistry

What problem does this paper attempt to address?

Porous Two-Dimensional Monolayer Metal-Organic Framework Material and Its Use for the Size-Selective Separation of Nanoparticles

Yi Jiang,Gyeong Hee Ryu,Se Hun Joo,Xiong Chen,Sun Hwa Lee,Xianjue Chen,Ming Huang,Xiaozhong Wu,Da Luo,Yuan Huang,Jeong Hyeon Lee,Bin Wang,Xu Zhang,Sang Kyu Kwak,Zonghoon Lee,Rodney S. Ruoff

DOI: https://doi.org/10.1021/acsami.7b10228

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:Rational bottom-up construction of two-dimensional (2D) covalent or noncovalent organic materials with precise structural control at the atomic or molecular level remains a challenge. The design and synthesis of metal-organic frameworks (MOFs) based on new building blocks is of great significance in achieving new types of 2D monolayer MOF films. Here, we demonstrate that a complexation between copper(II) ions and tri(β-diketone) ligands yields a novel 2D MOF structure, either in the form of a powder or as a monolayer film. It has been characterized by Fourier transform infrared, Raman, ultraviolet-visible, X-ray photoelectron, and electron paramagnetic resonance spectroscopies. Selected area electron diffraction and powder X-ray diffraction results show that the MOF is crystalline and has a hexagonal structure. A MOF-based membrane has been prepared by vacuum filtration of an aqueous dispersion of the MOF powder onto a porous Anodisc filter having pore size 0.02 μm. The porous MOF membrane filters gold nanoparticles with a cutoff of ∼2.4 nm.
Computational Study on Adsorption and Separation of H2/CH4/CO2 in Double-Walled Metal-Dipyrazole Frameworks

Xiao-Dong Li,Yan-Yu Xie,Peng-hui Yang,Xiao-Yu Huang,Xiu-Ying Liu

DOI: https://doi.org/10.1016/j.mtcomm.2024.111228

IF: 3.8

2024-01-01

Materials Today Communications

Abstract:The density functional theory (DFT) and molecular simulation techniques were employed to comprehensively study the structural characteristics and adsorption and separation properties of H2/CH4/CO2 in six novel double-walled dipyrazole metal-organic frameworks (MOFs), BUT-53 to BUT-58 (BUT: Beijing University of Technology). The six new MOFs were characterized using numerical Monte Carlo methods, based on crystal structures optimized through DFT calculations. The results reveal that six MOFs exhibit large specific surface area (1068 – 1780 cm2·g-1), high porosity (0.27 – 0.44 cm3·g-1), and suitable pore size (4.34 – 8.15Å), which are advantageous for gas adsorption and separation. Grand canonical Monte Carlo (GCMC) simulation was implemented to study gas adsorption and separation properties at both 77 and 298K. The simulation results demonstrate that BUT-57 possesses the highest storage capacity for pure component gas, while BUT-53 owns the best separation properties for binary mixture gases. Meanwhile, we propose an approach to enhance the selectivity for CO2 by augmenting the availability of nitrogen sites in porous MOFs, thereby offering some insights for related experimental investigations.
Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Yan-lu LIU,Xin JIANG,Jian-gang LU

DOI: https://doi.org/10.3969/j.issn.1003-9015.2015.05.013

2015-01-01

Abstract:Cu/ZnO/Al2O3catalysts were prepared by a co-precipitation method using different binders under various pressures, and the micro-structure and catalytic performance of the prepared catalysts were studied by TEM and BET. The results show that the internal diffusion resistance increases with the increase of pelleting force, which causes the decrease of CO conversion and the increase of methanol selectivity. The reaction mechanism study and the comparison of the mean free path of CO and H2 under reaction condition show that the change of pore structure has different diffusion effects on each gas. Therefore, the reaction route was varied when the H2 concentration near active sites decreases, and the change of the reaction rate is also affected, which leads to the change of methanol selectivity. Experiments using binders with different molecular weights verified this mechanism.
Multiple Functions of Gas Separation and Vapor Adsorption in a New MOF with Open Tubular Channels

Yong-Zhi Li,Gang-Ding Wang,Li-Na Ma,Lei Hou,Yao-Yu Wang,Zhonghua Zhu

DOI: https://doi.org/10.1021/acsami.0c21554

2021-01-19

Abstract:Separation or purification is one of the difficult problems in the petrochemical industry. To help solve the difficulty of separation or purification for C2H2/CO2 and C2Hn/CH4 in the chemical industry, we synthesized a new metal–organic framework (MOF), [Ni(dpip)]·2.5DMF·H2O (1), by a bipyridyl-substituted isophthalic acid ligand. The MOF includes two types of one-dimensional (1D) tubular channels with different sizes and porous environments. The unique tubular channels lead to not only remarkable gas sorption capacity of C2H4, C2H2, and CO2, but also good selectivity for C2H2/CH4, C2H2/CH4, CO2/CH4, and C2H2/CO2, as demonstrated by single-component sorption isotherm results, ideal adsorbed solution theory calculations, and dynamic breakthrough curves. Grand canonical Monte Carlo (GCMC) simulation reveals preferential adsorption sites in the MOF for CO2, C2H2, and C2H4. The MOF also exhibits an obvious size-selective absorption effect on vapor molecules.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21554?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21554</a>.X-ray crystallography; GCMC simulation; calculation of sorption heat for gas using Virial 2 model; selectivity prediction via IAST; crystallographic data of 1 (Table S1); selected bond lengths and angles of 1 (Table S2); coordination environment of Ni2+ ion in 1 (Figure S1); 3D (4,4)-c sqc net of 1 (Figure S2); PXRD patterns (Figure S3); TGA curves (Figure S4); porous distributions of 1a (Figure S5); fitted CO2, C2H2, C2H4, and CH4 adsorption isotherms of 1a (Figures S6 and S7); density contours (Figure S8); and VOC adsorption isotherms of 1a (Figure S9) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21554/suppl_file/am0c21554_si_001.pdf">PDF</a>)Crystallographic data (CCDC 2047212) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21554/suppl_file/am0c21554_si_002.cif">CIF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Microwave synthesis and characterization of MOF-74 (M = Ni, Mg) for gas separation

Xiaofei Wu,Zongbi Bao,Bin Yuan,Jun Wang,Yingqiang Sun,Hongmei Luo,Shuguang Deng

DOI: https://doi.org/10.1016/j.micromeso.2013.06.023

IF: 5.876

2013-01-01

Microporous and Mesoporous Materials

Abstract:Adsorption isotherms of CO2 on four MOF-74 adsorbents at 298K (1, magenta; 2, blue; 3, red; 4, black; dash line, Langmuir equation; solid line, dual-site Sips equation; dot line, single-site Sips equation).
Design and synthesis of different sized polyhedral channel MOF materials for the separation of CO 2 /N 2

Dong He,Jingjing Liu,Hua-Tian Shi,Zhifeng Xin

DOI: https://doi.org/10.1016/j.matlet.2024.136512

IF: 3

2024-04-26

Materials Letters

Abstract:A fractal polyhedral pore structural MOFs (Cu-TATB) is synthesized from the coordination of tridentate ligands (H 3 TATB) and Cu 4 clusters. This material is characterized by single crystal X-ray diffraction, powder X-ray diffraction, thermogravimetric analysis. The structure contains two different pore structures, including closed octahedral cages and open tetrakaidecahedron cages. The material has been successfully utilized for the separation of CO 2 /N 2 due to the fractal structure of the channel with different pore sizes. Under optimized temperature, Cu-TATB adsorbed a large amount of CO 2 and only negligible amount of N 2 , and the selectivity reaches 27. Breakthrough experiments demonstrated that this material can efficiently separate N 2 and CO 2 . This structure further demonstrates the infinite potential of 3D MOFs with diverse pore structures in applications such as CO 2 adsorption and separation.

materials science, multidisciplinary,physics, applied
Effect of Larger Pore Size on the Sorption Properties of Isoreticular Metal–Organic Frameworks with High Number of Open Metal Sites

Pascal D. C. Dietzel,Peter A. Georgiev,Morten Frøseth,Rune E. Johnsen,Helmer Fjellvåg,Richard Blom

DOI: https://doi.org/10.1002/chem.202001825

2020-09-24

Abstract:Four isostructural CPO‐54‐M metal‐organic frameworks based on the larger organic linker 1,5‐dihydroxynaphthalene‐2,6‐dicarboxylic acid and divalent cations (M=Mn, Mg, Ni, Co) are shown to be isoreticular to the CPO‐27 (MOF‐74) materials. Desolvated CPO‐54‐Mn contains a very high concentration of open metal sites, which has a pronounced effect on the gas adsorption of N2, H2, CO2 and CO. Initial isosteric heats of adsorption are significantly higher than for MOFs without open metal sites and are slightly higher than for CPO‐27. The plateau of high heat of adsorption decreases earlier in CPO‐54‐Mn as a function of loading per mole than in CPO‐27‐Mn. Cluster and periodic density functional theory based calculations of the adsorbate structures and energetics show that the larger adsorption energy at low loadings, when only open metal sites are occupied, is mainly due to larger contribution of dispersive interactions for the materials with the larger, more electron rich bridging ligand.
Significant Adsorption Enhancements Driven by Pore Microenvironment Tuning for Efficient C2H2/C2H4 Separation in a Chemically Stable Ni7-Cluster-based framework

Yunli Wang,Rizhao Zhang,Xue Jinpeng,Yuqiao Chai,Bao Li,Jia Li

DOI: https://doi.org/10.1039/d4qi01856g

IF: 7.779

2024-09-28

Inorganic Chemistry Frontiers

Abstract:In the activation process of MOF materials, the formation of open metal sites (OMSs) generally enhances the binding force between the framework and C2H2/C2H4, while it can also lead to co-adsorption and significantly reduce separation efficiency. In actual working environments, OMSs are susceptible to water attacks, rendering the material more prone to damage. Herein, a heptanuclear cluster-based MOF material denoted as Ni7-MOF is reported, which is constructed using extremely inexpensive organic linkers under pure water conditions. Two guest-free materials, Ni7-100 with coordinated water and Ni7-250 with OMSs were obtained to investigate the C2H2/C2H4 separation properties and mechanisms. The enhanced adsorption and separation performance of Ni7-250 compared to Ni7-100 is primarily attributed to the appropriate pore environment within the framework, leading to the dense packing of guest molecules, and is independent of OMSs. This conclusion is further supported by grand canonical Monte Carlo (GCMC) calculations. Due to the stability of nickel ions in the pentagonal pyramid structure, Ni7-250 with OMSs exhibits high stability and can achieve structural restoration under water vapor conditions. Although environmental factors can disrupt MOF materials through OMSs, such disruption can be avoided by selecting metal ions for MOF materials based on the stability of metal ion coordination geometry. Concurrently, the regeneration of material through the adsorption of water vapor by OMSs in the air can achieve a longer service life.

chemistry, inorganic & nuclear
Quantum Sieving of H2/D2 in MOFs: a Study on the Correlation Between the Separation Performance, Pore Size and Temperature

Dawei Cao,Jiahao Ren,Yu Gong,Hongliang Huang,Xiaolong Fu,Miao Chang,Xiaojun Chen,Chengjian Xiao,Dahuan Liu,Qingyuan Yang,Chongli Zhong,Shuming Peng,Zhengjun Zhang

DOI: https://doi.org/10.1039/c9ta14254a

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Using an advanced cryogenic thermal desorption spectroscopy (ACTDS) apparatus together with the temperature-programmed desorption (TPD) methodology, three MOF materials with different textural characteristics were examined for the separation of an equimolar H-2/D-2 mixture through quantum sieving. Finally, a universal fundamental correlation between the separation performance of (equilibrium) quantum sieving and pore size with temperature is established, which, for specific pore apertures, results in a subordinate local optimal operational temperature (LOOT) phenomenon that is dominant at local temperatures; the influence of the textural characteristics of different materials on this correlation is also illustrated in detail and clearly demonstrates that a good material for efficient H-2/D-2 quantum sieving should possess homogeneous hydrophilic pores with only one strong adsorption site. These results will exert great directive significance on defining the optimal operational conditions and suitable materials for more effective H-2/D-2 quantum sieving performance in a practical way.
Effects of pore size, mesostructure and aluminum modification on FDU-12 supported NiMo catalysts for hydrodesulfurization

Pei Yuan,Xue-Qin Lei,Hong-Ming Sun,Hong-Wei Zhang,Chun-Sheng Cui,Yuan-Yuan Yue,Hai-Yan Liu,Xiao-Jun Bao,Ting-Hai Wang

DOI: https://doi.org/10.1007/s12182-020-00502-5

IF: 4.757

2020-09-01

Petroleum Science

Abstract:Abstract A series of NiMo/FDU-12 catalysts with tunable pore diameters and mesostructures have been controllably synthesized by adjusting the synthetic hydrothermal temperature and applied for the hydrodesulfurization of dibenzothiophene and its derivative. The state-of-the-art electron tomography revealed that the pore sizes of FDU-12 supports were enlarged with the increase in the hydrothermal temperature and the mesostructures were transformed from ordered cage-type pores to locally disordered channels. Meanwhile, the MoS 2 morphology altered from small straight bar to semibending arc to spherical shape and finally to larger straight bar with the change of support structures. Among them, FDU-12 hydrothermally treated at 150 °C possessed appropriate pore diameter and connected pore structure and was favorable for the formation of highly active MoS 2 with curved morphology; thus, its corresponding catalyst exhibited the best HDS activity. Furthermore, it was indicated that the isomerization pathway could be significantly improved for HDS of 4,6-dimethyldibenzothiophene after the addition of aluminum, which was expected to be applied to the removal of the macromolecular sulfur compounds. Our study sheds lights on the relationship between support effect, active sites morphology and HDS performance, and also provides a guidance for the development of highly active HDS catalysts.

energy & fuels,engineering, petroleum
A Stable Layered Microporous MOF Assembled with Y-O Chains for Separation of MTO Products

Hengbo Li,Yunzhe Zhou,Cheng Chen,Yashuang Li,Zheng Liu,Mingyan Wu,Maochun Hong

DOI: https://doi.org/10.1021/acs.inorgchem.4c03735

IF: 4.6

2024-10-29

Inorganic Chemistry

Abstract:Benefiting from highly tunable pore environments, some metal-organic frameworks (MOFs) have recently shown promising prospects in the separation of methanol-to-olefin (MTO) products (mainly C(3)H(6) and C(2)H(4)). However, the "trade-off" between gas storage capacity and selectivity always results in inefficient separation. In addition, poor stability of MOFs also limits practical separation applications. Herein, we have successfully assembled a layered Y-MOF (FJI-W9) with bent diisophthalate...

chemistry, inorganic & nuclear
Topology Meets MOF Chemistry for Pore-Aperture Fine Tuning: Ftw-Mof Platform for Energy-Efficient Separations Via Adsorption Kinetics or Molecular Sieving

Dong-Xu Xue,Amandine Cadiau,Lukasz J. Weselinski,Hao Jiang,Prashant M. Bhatt,Aleksander Shkurenko,Lukasz Wojtas,Zhijie Chen,Youssef Belmabkhout,Karim Adil,Mohamed Eddaoudi

DOI: https://doi.org/10.1039/c8cc03841d

IF: 4.9

2018-01-01

Chemical Communications

Abstract:The MBB approach permitted the construction of a highly stable ftw-MOF for intricate separations.
Effects of Pyrolyzing and Phosphiding on Dibenzothiophene Hydrodesulfurization of MOF-Derived Ni2P

Yanyan Liu,Zhiheng Wang,Xin Li,Ruiyao Gao,Jiong Sun,Jiankun Liu,Songdong Yao

DOI: https://doi.org/10.1007/s11814-024-00100-w

IF: 2.7

2024-04-26

Korean Journal of Chemical Engineering

Abstract:To investigate the potential utilization of MOF templates in hydrodesulfurization (HDS) of large sulfur-containing compounds, MOF-derived Ni 2 P was prepared and characterized by XRD, TG, SEM, TEM, XPS and Raman. The findings indicate that MOF-derived Ni 2 P catalyst exhibits significantly enhanced Hydrodesulfurization (HDS) activity compared to conventional unsupported Ni 2 P. A modified pyrolysis and phosphiding condition allowed the stacking of central Ni atoms to be aggregated loosely, and morphology of MOF-derived Ni 2 P can be controllably transmitted from polyhedral to petal-like. A lower pyrolysis temperature tends to reduce density of Ni aggregates and cluster size of Ni 2 P(111), thereby facilitating the phosphiding of Ni aggregates and enhancing the catalytic activity of MOF-derived Ni 2 P in HDS process. Increasing the duration time of pyrolysis at lower temperatures does not accelerate the aggregation of particles, but makes petals on surface of MOF-derived Ni become thinner and eventually disappear, until coral-like nanosphere aggregates with uniform size are formed. The gradually elimination of MOF framework renders nickel aggregates more susceptible to phosphiding. The collapse of pore structure of MOF template can impact HDS activity of MOF-derived Ni 2 P. Prolonging pyrolysis time causes the spacing between Ni 2 P clusters to diminish, thereby significantly decreasing reactivity of Ni 2 P-400-4-275 compared to Ni 2 P-400-2-275 in DBT–HDS.

engineering, chemical,chemistry, multidisciplinary
Fine pore engineering in a series of isoreticular metal-organic frameworks for efficient C2H2/CO2 separation

Jun Wang,Yan Zhang,Yun Su,Xing Liu,Peixin Zhang,Rui-Biao Lin,Shixia Chen,Qiang Deng,Zheling Zeng,Shuguang Deng,Banglin Chen

DOI: https://doi.org/10.1038/s41467-021-27929-7

IF: 16.6

2022-01-11

Nature Communications

Abstract:Abstract The separation of C 2 H 2 /CO 2 is not only industrially important for acetylene purification but also scientifically challenging owing to their high similarities in physical properties and molecular sizes. Ultramicroporous metal-organic frameworks (MOFs) can exhibit a pore confinement effect to differentiate gas molecules of similar size. Herein, we report the fine-tuning of pore sizes in sub-nanometer scale on a series of isoreticular MOFs that can realize highly efficient C 2 H 2 /CO 2 separation. The subtle structural differences lead to remarkable adsorption performances enhancement. Among four MOF analogs, by integrating appropriate pore size and specific binding sites, [Cu(dps) 2 (SiF 6 )] (SIFSIX-dps-Cu, SIFSIX = SiF 6 2- , dps = 4.4’-dipyridylsulfide, also termed as NCU-100) exhibits the highest C 2 H 2 uptake capacity and C 2 H 2 /CO 2 selectivity. At room temperature, the pore space of SIFSIX-dps-Cu significantly inhibits CO 2 molecules but takes up a large amount of C 2 H 2 (4.57 mmol g −1 ), resulting in a high IAST selectivity of 1787 for C 2 H 2 /CO 2 separation. The multiple host-guest interactions for C 2 H 2 in both inter- and intralayer cavities are further revealed by dispersion-corrected density functional theory and grand canonical Monte Carlo simulations. Dynamic breakthrough experiments show a clean C 2 H 2 /CO 2 separation with a high C 2 H 2 working capacity of 2.48 mmol g −1 .

multidisciplinary sciences
Use of breakthrough experiment to evaluate the performance of hydrogen isotope separation for metal-organic frameworks M-MOF-74 (M=Co, Ni, Mg, Zn)

Yanan Si,Wenjing Wang,El-Sayed M. El-Sayed,Daqiang Yuan

DOI: https://doi.org/10.1007/s11426-020-9722-2

2020-05-25

Science China Chemistry

Abstract:The unique adsorption performance of metal-organic frameworks (MOFs) indicates a new direction for gas separation and purification. The low-temperature distillation, as a traditional technique for hydrogen isotope separation, is limited as it is a high energy- and cost-intensive process. Instead of utilizing such a conventional separation route, we use ordered microporous frameworks based on a physical adsorption mechanism to solve the challenge of hydrogen isotope separation. Herein we analyze M-MOF-74 (M=Co, Ni, Mg, Zn), featuring a hexagonal channel about 11 Å and high density of open metal sites, for their ability to separate and purify deuterium from the hydrogen isotope mixture by dynamic column breakthrough experiments. Our results show that the combination of the strength of binding sites, density of coordinatively unsaturated metal sites and hydrogen isotope adsorption capacity of materials renders Co-MOF-74 as an optimal adsorbent for the capture of deuterium from hydrogen isotope mixtures in a simulated industrial process.

chemistry, multidisciplinary
Large-Scale Computational Screening of Metal–Organic Frameworks for D2/H2 Separation

Fei Wang,Zhiyuan Bi,Lifeng Ding,Qingyuan Yang

DOI: https://doi.org/10.1016/j.cjche.2022.04.003

IF: 3.8

2022-04-01

Chinese Journal of Chemical Engineering

Abstract:Deuterium (D2) is one of the important fuel sources that power nuclear fusion reactors. The existing D2/H2 separation technologies that obtain high-purity D2 are cost-intensive. Recent research has shown that metal–organic frameworks (MOFs) are of good potential for D2/H2 separation application. In this work, a high-throughput computational screening of 12020 computation-ready experimental MOFs is carried out to determine the best MOFs for hydrogen isotope separation application. Meanwhile, the detailed structure-performance correlation is systematically investigated with the aid of machine learning. The results indicate that the ideal D2/H2 adsorption selectivity calculated based on Henry coefficient is strongly correlated with the 1/ΔAD feature descriptor; that is, inverse of the adsorbility difference of the two adsorbates. Meanwhile, the machine learning (ML) results show that the prediction accuracy of all the four ML methods is significantly improved after the addition of this feature descriptor. In addition, the ML results based on extreme gradient boosting model also revealed that the 1/ΔAD descriptor has the highest relative importance compared to other commonly-used descriptors. To further explore the effect of hydrogen isotope separation in binary mixture, 1548 MOFs with ideal adsorption selectivity greater than 1.5 are simulated at equimolar conditions. The structure-performance relationship shows that high adsorption selectivity MOFs generally have smaller pore size (0.3–0.5 nm) and lower surface area. Among the top 200 performers, the materials mainly have the sql, pcu, cds, hxl, and ins topologies. Finally, three MOFs with high D2/H2 selectivity and good D2 uptake are identified as the best candidates, of all which had one-dimensional channel pore. The findings obtained in this work may be helpful for the identification of potentially promising candidates for hydrogen isotope separation.

engineering, chemical
Thermodynamic Separation of Hydrogen Isotopes Using Hofmann-Type Metal-Organic Frameworks with High-Density Open Metal Sites

Junsu Ha,Minji Jung,Jaewoo Park,Hyunchul Oh,Hoi Ri Moon

DOI: https://doi.org/10.1021/acsami.2c07829

2022-07-13

Abstract:Hydrogen isotope separation with nanoporous materials is a very challenging yet promising approach. To overcome the limitation of the conventional isotope separation strategy, quantum sieving-based separation using nanoporous materials has been investigated recently. In this study, to see the thermodynamic deuterium separation phenomena attributed to the chemical affinity quantum sieving effect, we examine Hofmann-type metal-organic frameworks (MOFs), Co(pyz)[M(CN)4] (pyz = pyrazine, M = Pd2+, Pt2+, and Ni2+), which have microporosity (4.0 × 3.9 Å2) and an extraordinarily high density of open metal sites (∼9 mmol/cm3). Owing to the preferential adsorption of D2 over H2 at strongly binding open metal sites, the Hofmann-type MOF, Co(pyz)[Pd(CN)4] exhibited a high selectivity (SD2/H2) of 21.7 as well as a large D2 uptake of 10 mmol/g at 25 K. This is the first study of Hofmann-type MOFs to report high selectivity and capacity, both of which are important parameters for the practical application of porous materials toward isotope separation.
Synergistic Effect of Active Sites and a Multiple-Micropore System for a Metal–Organic Framework Exhibiting High Separation of CO 2 /CH 4 and C 2 H 2 /CH 4

Liang Wu,Meng Feng,Yuxiao Zhang,Yu Cao,Dongmei Wang,Chunxia Li

DOI: https://doi.org/10.1021/acs.inorgchem.1c01370

IF: 4.6

2021-07-26

Inorganic Chemistry

Abstract:Efficient gas separation and purification play a vital role in the current advanced development of industry, and the application of MOF adsorbents in this area with highly technical materials shows obvious advantages. On the basis of reticular chemistry, the 4-c lvt MOF adsorbent [CuDTTA]·3DMF·CH3CN has been constructed (CuDTTA; H2DTTA = 2,5-bis(1H-1,2,4-triazol-1-yl)terephthalic acid). CuDTTA reveals a multiple-micropore system and high-density active sites decorated on the channel surfaces, which are conducive to its extraordinary selectivity of CO2/CH4 and C2H2/CH4 (29 and 166, 1:1). In combination with an analysis of Qst values, CuDTTA possesses the synergistic effect of size sieving and abundant functional sites, significantly improving the gas adsorption and separation performance. Meanwhile, the results also reveal that functional sites have a stronger binding affinity toward C2H2 with respect to CO2. Such a conclusion renders CuDTTA to be a promising adsorbent material for industrial applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.inorgchem.1c01370.PXRD, TGA, additional structural figures, and crystal data for CuDTTA and calculations of selectivity from IAST (PDF)This article has not yet been cited by other publications.

chemistry, inorganic & nuclear
Porosity Control in Pillar-Layered MOF Architectures: Hydrogen Bonding in Amino-Functionalized 2D Layers

Fatemeh Tavakoli Quchani,Alireza Salimi,Ali Nakhaei Pour

DOI: https://doi.org/10.1039/d4ce00503a

IF: 3.756

2024-07-28

CrystEngComm

Abstract:Based on crystal engineering, three Zn/Cd-based metal-organic frameworks (MOFs) (FUM-153(Zn-H), FUM-167(Cd-H), and FUM-176(Cd-NH2)) were successfully prepared from the rigid O-donor/flexible N-donor linkers (H2bdc (terephthalic acid) (L(O)H) or NH2-H2bdc (2-Aminoterephthalic acid) (L(O)NH2) and bpfb (N, N'-1,4-(phenylene) diisonicotinamide) (L(N))) with Zn/Cd ions. Structurally, the major difference among the FUMs is the various behaviors of the DMF solvent in the lattice or the coordination environment of the structures. This study investigated the effect of hydrogen bonding of NH2 substitution in 2D layer linkers and its effect on the layer architecture. The results showed that hydrogen bonding indirectly affects the coordination of DMF solvent to the metal center and the porosity. To investigate the effect of the substitution NH2 in the presence or absence of the DMF solvent in the FUMs, the Cambridge Structural Database (CSD) was surveyed for similar structures with the L(O)H and L(O)NH2 linkers. Remarkably, the obtained data suggested that the existence of NH2 substitution may reduce the probability of the coordination of DMF to the metal centers. Theoretical studies were carried out to explore the gas adsorption performance of the titled FUMs. A better CH4 adsorption compared to CO2 for all FUMs was observed. It is worth saying that CH4 and CO2 gas adsorption in FUM-176(Cd-NH2) are higher than FUM-153(Zn-H) and FUM-167(Cd-H). It can be deduced that the NH2 substitution in 2D layer linkers prevented the entering of DMF molecules into the framework (lattice or coordinated solvent). Consequently, more accessible pores are provided for gas molecules. The work demonstrates the role of linker functionality in the crystal structures, pore size, and gas adsorption properties.

chemistry, multidisciplinary,crystallography
Exploiting Dynamic Opening of Apertures in a Partially Fluorinated MOF for Enhancing H2 Desorption Temperature and Isotope Separation

M. Yoon,Minji Jung,Hyunchul Oh,W. Lee,D. Wallacher,Seohyeon Jee,Jaewoo Park,A. Franz,Linda Zhang,M. Hirscher,K. Choi

DOI: https://doi.org/10.1021/jacs.9b10268

IF: 15

2019-11-21

Journal of the American Chemical Society

Abstract:Deuterium has been recognized as an irreplaceable element in industrial and scientific research. However, hydrogen isotope separation still remains a huge challenge due to the identical physicochemical properties of the isotopes. In this paper, a partially fluorinated metal–organic framework (MOF) with copper, a so-called FMOFCu, was investigated to determine the separation efficiency and capacity of the framework for deuterium extraction from a hydrogen isotope mixture. The unique structure of this porous material consists of a trimodal pore system with large tubular cavities connected through a smaller cavity with bottleneck apertures with a size of 3.6 Å plus a third hidden cavity connected by an even smaller aperture of 2.5 Å. Depending on the temperature, these two apertures show a gate-opening effect and the cavities get successively accessible for hydrogen with increasing temperature. Thermal desorption spectroscopy (TDS) measurements indicate that the locally flexible MOF can separate D2 from anisotope mixture efficiently, with a selectivity of 14 at 25 K and 4 at 77 K.

Medicine,Materials Science,Chemistry

The Effect of Pore Sizes on D2/H2 Separation Conducted by MOF-74 Analogue

Porous Two-Dimensional Monolayer Metal-Organic Framework Material and Its Use for the Size-Selective Separation of Nanoparticles

Computational Study on Adsorption and Separation of H2/CH4/CO2 in Double-Walled Metal-Dipyrazole Frameworks

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Multiple Functions of Gas Separation and Vapor Adsorption in a New MOF with Open Tubular Channels

Microwave synthesis and characterization of MOF-74 (M = Ni, Mg) for gas separation

Design and synthesis of different sized polyhedral channel MOF materials for the separation of CO 2 /N 2

Effect of Larger Pore Size on the Sorption Properties of Isoreticular Metal–Organic Frameworks with High Number of Open Metal Sites

Significant Adsorption Enhancements Driven by Pore Microenvironment Tuning for Efficient C2H2/C2H4 Separation in a Chemically Stable Ni7-Cluster-based framework

Quantum Sieving of H2/D2 in MOFs: a Study on the Correlation Between the Separation Performance, Pore Size and Temperature

Effects of pore size, mesostructure and aluminum modification on FDU-12 supported NiMo catalysts for hydrodesulfurization

A Stable Layered Microporous MOF Assembled with Y-O Chains for Separation of MTO Products

Topology Meets MOF Chemistry for Pore-Aperture Fine Tuning: Ftw-Mof Platform for Energy-Efficient Separations Via Adsorption Kinetics or Molecular Sieving

Effects of Pyrolyzing and Phosphiding on Dibenzothiophene Hydrodesulfurization of MOF-Derived Ni2P

Fine pore engineering in a series of isoreticular metal-organic frameworks for efficient C2H2/CO2 separation

Use of breakthrough experiment to evaluate the performance of hydrogen isotope separation for metal-organic frameworks M-MOF-74 (M=Co, Ni, Mg, Zn)

Large-Scale Computational Screening of Metal–Organic Frameworks for D2/H2 Separation

Thermodynamic Separation of Hydrogen Isotopes Using Hofmann-Type Metal-Organic Frameworks with High-Density Open Metal Sites

Synergistic Effect of Active Sites and a Multiple-Micropore System for a Metal–Organic Framework Exhibiting High Separation of CO 2 /CH 4 and C 2 H 2 /CH 4

Porosity Control in Pillar-Layered MOF Architectures: Hydrogen Bonding in Amino-Functionalized 2D Layers

Exploiting Dynamic Opening of Apertures in a Partially Fluorinated MOF for Enhancing H2 Desorption Temperature and Isotope Separation