Abstract:Understanding the elemental and structural evolution from green fibers to inorganic fibers is important for fabricating high-performance ceramic fibers via the polymer-derived ceramics (PDCs) route. In a previous study, we found a novel polyborazine precursor, poly[2-propylamino-4,6-bis(methylamino)borazine-co-tri(methylamino)borazine] (PPMAB), which possesses a high ceramic yield and outstanding spinnability. Herein, we provide an insight into the evolution process from PPMAB to inorganic BN fibers. During the curing process, NH3 only reacted with the B–NHCH3 groups in PPMAB to form B–NH2 groups, which further reacted with B–NHCH3 to form B–NH–B bridges. Therefore, crosslinked networks were formed in the cured fibers and the gel content increased from 52.3 to 92.1 wt%. In the nitridation process, NH3 not only reacted with unreacted B–NHCH3 but also reacted with B–NHCH2CH2CH3 groups to form B–NH2 groups, which reacted with N–CH3 bridges in the adjacent PPMAB molecule to form –N(B3N3)3- networks. Simultaneously, CH3NH2 and CH3CH2CH2NH2 escaped from the fibers, and the carbon content of the fibers was reduced from 20.588 wt% to 0.115 wt%. By controlling the curing and nitridation processes, the curing degree can be enhanced, whereas the pore defects resulting from gas molecular escape can be effectively reduced. Thus, dense inorganic BN fibers with excellent dielectric properties (2.33 < ε < 2.5, tan δ < 3.4x10−3) and high tensile strength (1.6 GPa) were fabricated. The present study not only provides ideas for the design and synthesis of polyborazine precursors, but also for the fabrication of high-performance BN fibers.

Nearly stoichiometric BN fiber with high crystallinity achieved by boron trichloride assisted curing process

Insight into the evolution process from novel polyborazine precursor PPMAB to inorganic BN fiber

Structural Evaluation And Mechanical Property Of Boron Nitride Fibers During Melt-Drawn Fabrication Process

Microstructures and properties of polymer-derived hexagonal boron nitride fibers with initial gradient oxygen contents

Characterization and Microstructural Evolution of Continuous BN Ceramic Fibers Containing Amorphous Silicon Nitride

Pressureless consolidation of boron nitride fiber ceramics via a chemical bonding approach

Preparation of Boron Nitride-Coated Carbon Fibers and Synergistic Improvement of Thermal Conductivity in Their Polypropylene-Matrix Composites

Preparation of Boron Nitride Nanosheet-Coated Carbon Fibres and Their Enhanced Antioxidant and Microwave-Absorbing Properties

The effect of deposition temperature of BN interphase on the tensile properties of SiC fibers

Dense additive-free bulk boron nitride ceramics developed by self-densification of borazine

Effect of BN interfacial layer on the mechanical behavior of SiC fiber reinforced SiC ceramic matrix composites

In situ molten phase-assisted self-healing for maintaining fiber morphology during conversion from melamine diborate to boron nitride

Effects of BN on the microstructural evolution and mechanical properties of BAS-BN composites

Overall fabrication of uniform BN interphase on 2.5D-SiC fabric via precursor-derived methods

Synthesis of vertically aligned and interconnected BN fiber skeleton for significantly improving thermal conductivity of PVDF

The microstructural evolution, mechanical and dielectric properties of BNW/SiO2 ceramics

Effect of sintering temperature on microstructure and mechanical properties of boron nitride whisker reinforced fused silica composites

Advanced synthesis of highly crystallized hexagonal boron nitride by coupling polymer-derived ceramics and spark plasma sintering processes—influence of the crystallization promoter and sintering temperature

Advanced Fabrication Method and Mechanical Properties of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics

Bio-inspired Synthesis of Highly Crystallized Hexagonal Boron Nitride Nanosheets

Fabrication and microstructure of in-situ synthesized SiBON composites