Abstract:CsPbI2Br thin films prepared in ambient air are susceptible to humidity, resulting in low coverage, poor crystallization quality, numerous pinholes, and easy transformation into non perovskite phases. To overcome the troubles of pervoksite fabrication in ambient air, a feasible way is to reduce the moisture around the films as much as possible according to dynamic hot-air assisted strategy. However, the hot air accelerates the evaporation rate of solvent, resulting in the decrease of grain size. In order to improve the crystal growth and long-term stability in dynamic hot-air assisted strategy, in this work, we present a dynamic hot-air assisted recrystallization (DHR) strategy to prepare high-quality CsPbI2Br thin films in ambient air (i.e. the CsPbI2Br thin films prepared via dynamic hot-air strategy are recrystallized by using a green solvent (methylamine acetate) with high viscosity coefficient). Under ambient air with high humidity (RH＞60%), the CsPbI2Br thin film with high coverage, (100) preferred orientation, large average grain size, and stable structure is prepared via DHR strategy. The dynamic hot-air process can effectively reduce the moisture around the film and increase the nucleation sites in the precursor solution, thereby improving the coverage of the film. However, this process inevitably results in the significant decrease of grain size (Rave= 0.32 μm) (i.e. more grain boundaries), exacerbating non-radiative recombination of carriers associated with trap states at these boundaries. The high coverage increases the grain-to-grain contact area, facilitating complete recrystallization. Thus, the recrystallization process can significantly increase the grain size (Rave = 2.63 μm) and obtain a (100) preferred orientation (I(110)/I(200) = 0.006), resulting in high photoluminescence intensity and long fluorescence lifetime (118 ns). The unencapsulated CsPbI2Br perovskite solar cell (PSC) optimized via DHR strategy with low hysterescence factor (2.34%) and high repeatability exhibits a high power conversion efficiency (PCE = 17.55%), which is higher than those of most CsPbI2Br PSCs prepared in ambient air and gloveboxes previously reported. Moreover, the unencapsulated CsPbI2Br PSC possesses an excellent storage stability under ambient air with high humidity (RH > 60%), remaining 96% of the original PCE after aging 40 days. This provides a promising approach for achieving high-performance and long-term stable CsPbI2Br films under ambient air with high humidity, which is expected to promote the commercialization process of perovskite/silicon tandem cells and semi-transparent devices.

Fast growth of CsPbBr 3 single crystal with high quality by a modified solvent-evaporation method

Growth, Characterization and Photoelectrical Properties of Orthorhombic and Cubic CsPbBr3 Single Crystals

Purification and Improved Photoelectric Properties of Lead-Free Perovskite Cs3Bi2Br9 Crystals

Nucleation-Controlled Growth of High-Quality CsPbBr3 Single Crystal for Ultrasensitive Weak-Light Photodetector

Growth of a Sub-Centimeter-Sized CsPbBr3 Bulk Single Crystal Using an Anti-Solvent Precipitation Method

Thermodynamically induced crystal restructuring to make CsPbCl3 single crystal films for weak light detection

Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared Via Low-Temperature in Situ Dynamic Thermal Crystallization

Crystallization of CsPbBr3 single crystals in water for X-ray detection

Large and Ultrastable All‐Inorganic CsPbBr3 Monocrystalline Films: Low‐Temperature Growth and Application for High‐Performance Photodetectors

Rapid Nucleation and Slow Crystal Growth of CsPbI3 Films Aided by Solvent Molecular Sieve for Perovskite Photovoltaics

Monolithically grown CSPbBr 3 by chemical vapor deposition for Self-Powered photodetector

Van der Waals Epitaxial Deposition of CsPbBr 3 Films for Flexible Optoelectronic Applications

Ultrahigh-quality large single crystal preparation using the modified seed crystal-induced crystallization method with precision-controlled temperature gradient

Ultrastable and high-performance amplified spontaneous emission in centimeter-scale inorganic CsPbBr3 single-crystal thin films

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

Improving Crystallization and Photoelectric Performance of CsPbI2Br Perovskite under Ambient Air Via Dynamic Hot-Air Assisted Recrystallization Strategy

In Situ Low-Temperature Growth and Superior Luminescent Property of Well-Aligned, High-Quality Cubic CsPbBr3 Micrometer-Scale Single Crystal Arrays on Transparent Conductive Substrates.

High-Efficiency CsPbBr3 Light-Emitting Diodes using One-Step Spin-Coating In Situ Dynamic Thermal Crystallization

Antisolvent‐Free Heterogenous Nucleation Enabled by Employing 4‐Tert‐Butyl Pyridine Additive and Two‐Step Annealing for Efficient CsPbI2Br Perovskite Solar Cells

A green Bi-Solvent system for processing high-quality CsPbBr3 films in efficient all-inorganic perovskite solar cells

Curing the Fundamental Issue of Impurity Phases in Two-Step Solution-Processed CsPbBr3 Perovskite Films.