Abstract:Metal foils are used for packaging and decoration, and gold leaf down to 0.1 mu m thickness has been made since ancient Egyptian times. The chemical inertness of gold, causing non-stickiness, and its malleability, underlie the success of "Goldbeating". In contrast, lithium metal is extremely reactive and sticks to rollers as well as degrades in air. How to make one-to-few mu m thick, large-area lithium foil is a key challenge for the battery industry, as such foils can provide extraordinarily longer cycle life to rechargeable batteries when standard anodes such as graphite or silicon are prelithiated right before cell assembly, by mechanically pressing the thin foil to the anode. Here, we show that the addition of a small alloy-element on the order of 1 at% to the body-centered cubic (BCC) phase drastically changes the oxidized surface layer composition, making the Li alloy much less sticky towards the rolling machine. By forming a protective passivation layer, the air stability is dramatically enhanced, so it can be stored for up to 12 hours without significant performance degradation. Also, there is a 10x strengthening effect, making the sheet much less prone to ductile rupture damage during rolling, while maintaining malleability. As a result, we are able to fabricate large-area lithium foil in a roll-to-roll manner down to 1 mu m thickness. Such an ultra-thin Li foil anode demonstrates superior electrochemical performance directly in pouch cells (>320 W h kg(-1)), in which the 0.8 A h pouch-cell achieved a 100 cycle life under lean electrolyte conditions of 2.67 g A h(-1). Furthermore, we applied 5 mu m Li to graphite prelithiation, having an extra 1 mA h cm(-2) lithium inventory (the amount of cyclable lithium in a full cell), the capacity of the LFP//graphite full cell increases by 18%, with an average coulombic efficiency of >99.99% over more than 300 cycles.

Free-standing ultrathin lithium metal–graphene oxide host foils with controllable thickness for lithium batteries

Interfacial friction enabling ≤ 20 μm thin free-standing lithium strips for lithium metal batteries

Preparation and electrochemical performance of ultra-thin reduced graphene oxide/lithium metal composite foils

Air-stable and Freestanding Lithium Alloy/graphene Foil As an Alternative to Lithium Metal Anodes

Non-sticky Li-alloy leaves for long-lasting secondary batteries

Graphene coated lithium foil anode enables long cycle life Li metal pouch cells

Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes

Ultrathin Al foils to fabricate dendrite-free Li–Al anodes

Anode‐Free Lithium Metal Batteries Based on an Ultrathin and Respirable Interphase Layer

Advancing Anode-Less Lithium Metal Batteries: ZnF2 Modification and In-Situ Structural Regulation for Enhanced Performance

Scalable Production of Thin and Durable Practical Li Metal Anode for High‐Energy‐Density Batteries

Vacuum Evaporation Plating Enabling ≤ 10 μm Ultrathin Lithium Foils for Lithium Metal Batteries

Melting lithium alloying to improve the affinity of Cu foil for ultra-thin lithium metal anode

Ultrasmooth and Dense Lithium Deposition Toward High-Performance Lithium-Metal Batteries

Less is more: a perspective on thinning lithium metal towards high-energy-density rechargeable lithium batteries

Reversible Deposition of Lithium Particles Enabled by Ultraconformal and Stretchable Graphene Film for Lithium Metal Batteries

Scalable hierarchical lithiophilic engineering of metal foam enables stable lithium metal batteries

Endowing Cu Foil Self-Wettable in Molten Lithium: A Roll-to-Roll Wet Coating Strategy to Fabricate High-Performance Ultrathin Lithium Metal Anodes

Facile decoration of fluorinated metal-organic frameworks on copper foil for regulated lithium deposition and robust solid electrolyte interface

Aluminum–Silicon Alloy Foils as Low-Cost, Environmentally Friendly Anodes for Lithium-Ion Batteries

Roll-to-roll fabrication of lithium metal anodes with hierarchical lithiophilic structures and controlled deposition for enhanced stability