Abstract:The binary perovskite-type compound (1 − x )BiFeO 3 – x BaTiO 3 (BF-BT) is considered as a promising high-temperature lead-free piezoelectric material due to its high Curie temperature ( T C > 400 °C) and better electromechanical properties. In this work, ternary lead-free piezoelectric ceramics with a chemical formula of (0.67 − x )BiFeO3–0.33BaTiO3– x Bi(Zn0.5Ti0.5)O 3 + 1 mol% MnO 2 (where x = 0–0.05) were prepared by the conventional solid-state reaction route. The effects of Bi(Zn 0.5 Ti 0.5 )O 3 introduction on the phase structures and microstructures, piezoelectric and dielectric properties, as well as impedance characteristics of BF-BT ceramics were investigated in detail. Firstly, all the samples synthesized exhibit a pure perovskite structure with the coexistence of rhombohedral ( R ) and tetragonal ( T ) phases, and the T phase content increases with increase in x . A small amount of Bi(Zn 0.5 Ti 0.5 )O 3 ( x ≤ 0.03) that were incorporated into the perovskite lattice of BF-BT can promote the grain growth of ceramics. Secondly, all samples were found with a notable relaxed phase transition behavior, T C of the system decreases with increase in x . The AC impedance spectra of the samples were fitted and analyzed according to the R-CPE equivalent circuit model, the electric impedance of the ceramics at high temperatures was mainly contributed by grain boundaries. Moreover, the dielectric relaxation activation energy of the samples firstly decreases and then increases with increase in x . Finally, the composition with x = 0.02 shows the optimized electrical properties among these samples, including T C = 454 °C, d 33 = 117 pC/N, k p = 23%, tan δ = 0.11, which are mainly benefited from the bismuth content compensation and the substitution of (Zn 0.5 Ti 0.5 ) 3+ for Fe 3+ at B-site reducing the valence change of Fe 3+ in BF-BT.

Electrical properties of (1-x)BiFe0.94Zn0.03Ti0.03O3-xBaTiO3 lead-free ceramics obtained via sol-gel route and two-step sintering process

Enhanced Electric-Field-induced Strain in 0.7bi(1−x)smxfeo3–0.3batio3 Lead-Free Ceramics

Enhanced electrical properties of (Zn, Mn)-modified BiFeO3–BaTiO3 lead-free ceramics prepared via sol–gel method and two-step sintering

Effects of Bi(Zn0.5Ti0.5)O3 introduction on the structures and electrical properties of BiFeO3–BaTiO3 lead-free piezoelectric ceramics

Structural Evolution, Electrical Properties and Electric-Field-induced Changes of (0.8− X )pbtio 3 – X BiFeO 3 –0.2bazro 3 System Near the Morphotropic Phase Boundary

Two-step sintering and electrical properties of sol–gel derived 0.94(Bi<sub>0.5</sub>Na<sub>0.5</sub>)TiO<sub>3</sub>–0.06BaTiO<sub>3</sub> lead-free ceramics

Electrical properties of 0.94Bi0.5Na0.5TiO3–0.06Ba(Zr0.055Ti0.945)O3 lead-free ceramics with high thermal stability

Electrical properties of 0.94Bi 0.5 Na 0.5 TiO 3 –0.06Ba(Zr 0.055 Ti 0.945 )O 3 lead-free ceramics with high thermal stability

Investigation of BiFeO3-BaTiO3 Lead-Free Piezoelectric Ceramics with Nonstoichiometric Bismuth

Two-step sintering and electrical properties of sol–gel derived 0.94(Bi 0.5 Na 0.5 )TiO 3 –0.06BaTiO 3 lead-free ceramics

Electrical properties of 0.94Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>–0.06Ba(Zr<Subscript>0.055</Subscript>Ti<Subscript>0.945</Subscript>)O<Subscript>3</Subscript> lead-free ceramics with high thermal stability

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

Enhanced electrical properties in lead-free NBT–BT ceramics by series ST substitution

Structure and electrical properties of (Bi0.5Na 0.5)0.94Ba0.06TiO3-Bi 0.5(Na0.82K0.18)0.5TiO 3-BiAlO3 lead free piezoelectric ceramics

Improved chemical defects, domain structure and electrical properties of BiFeO 3 –BaTiO 3 lead-free ceramics by simultaneous Na/Bi codoping and quenching process

Two-step sintering and electrical properties of sol–gel derived 0.94(BiNa)TiO–0.06BaTiO lead-free ceramics

Investigation of Lead-Free BiFeO3–BaTiO3 Piezoelectric Ceramics Through Precise Composition Control

Phase transition and electrical properties of BiFe0.97Ga0.03O3-BaTiO3 lead-free ceramics

Synthesis and characterization of (1-x)Bi0.9Sm0.1FeO3 - (x)BaZr0.15Ti0.85O3 based solid solution: Temperature-dependent dielectric and impedance properties

Piezoelectric and Dielectric Properties of Bi0˙5(Na0˙84K0˙16)0˙5TiO3–Ba(Zr0˙04Ti0˙96)O3lead Free Piezoelectric Ceramics

Low electric field induced large electromechanical properties of BiFeO3-BaTiO3-based ceramics via phase composition modulation